#
# vagrant up
+set -eu
set -o pipefail
-_exit_handler() {
- local rc="$?"
- trap - EXIT
- if [ "$rc" -ne 0 ]; then
- echo "Error occurred ($rc) while running $0 at line $1 : $BASH_COMMAND"
- fi
- exit "$rc"
-}
-
-trap '_exit_handler $LINENO' EXIT ERR
-
# capture the directory that the script is running from
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
echo >&2 "${0} options:"
echo >&2 " -d, --debug Run salt installation in debug mode"
echo >&2 " -c <local.params>, --config <local.params> Path to the local.params config file"
- echo >&2 " -t, --test Test installation running a CWL workflow"
+ echo >&2 " -t, --test Test cluster by running \`arvados-client diagnostics\`"
+ echo >&2 " and a simple workflow"
echo >&2 " -r, --roles List of Arvados roles to apply to the host, comma separated"
echo >&2 " Possible values are:"
- echo >&2 " api"
+ echo >&2 " balancer"
echo >&2 " controller"
echo >&2 " dispatcher"
echo >&2 " keepproxy"
echo >&2 " keepbalance"
echo >&2 " keepstore"
echo >&2 " keepweb"
+ echo >&2 " monitoring"
echo >&2 " shell"
echo >&2 " webshell"
echo >&2 " websocket"
echo >&2 " -h, --help Display this help and exit"
echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
echo >&2 " This parameter does not perform any installation at all. It's"
- echo >&2 " intended to give you a parsed sot of configuration files so"
+ echo >&2 " intended to give you a parsed set of configuration files so"
echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
echo >&2 " It"
echo >&2 " - parses the pillar and states templates,"
echo >&2 " - downloads the helper formulas with their desired versions,"
echo >&2 " - prepares the 'top.sls' files both for pillars and states"
- echo >&2 " for the selected role/s"
+ echo >&2 " for the selected role(s)"
echo >&2 " - writes the resulting files into <dest_dir>"
echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
echo >&2 " --development Run in dev mode, using snakeoil certs"
for i in ${2//,/ }
do
# Verify the role exists
- if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher" == *"$i"* ]]; then
+ if [[ ! "database,balancer,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher,monitoring" == *"$i"* ]]; then
echo "The role '${i}' is not a valid role"
usage
exit 1
fi
- ROLES="${ROLES} ${i}"
+ ROLES="${ROLES:-} ${i}"
done
shift 2
;;
cert_dir=${1}
cert_name=${2}
- mkdir -p /srv/salt/certs
+ mkdir -p --mode=0700 /srv/salt/certs
if [ -f ${cert_dir}/${cert_name}.crt ]; then
- cp -v ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
+ install --mode=0600 ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
else
echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
exit 1
fi
if [ -f ${cert_dir}/${cert_name}.key ]; then
- cp -v ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
+ install --mode=0600 ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
else
echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
exit 1
fi
}
+apply_var_substitutions() {
+ local SRCFILE=$1
+ local DSTFILE=$2
+ sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
+ s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
+ s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+ s#__CLUSTER__#${CLUSTER}#g;
+ s#__DOMAIN__#${DOMAIN}#g;
+ s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
+ s#__IP_INT__#${IP_INT}#g;
+ s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+ s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
+ s#__INITIAL_USER__#${INITIAL_USER}#g;
+ s#__LE_AWS_REGION__#${LE_AWS_REGION:-}#g;
+ s#__LE_AWS_SECRET_ACCESS_KEY__#${LE_AWS_SECRET_ACCESS_KEY:-}#g;
+ s#__LE_AWS_ACCESS_KEY_ID__#${LE_AWS_ACCESS_KEY_ID:-}#g;
+ s#__DATABASE_NAME__#${DATABASE_NAME}#g;
+ s#__DATABASE_USER__#${DATABASE_USER}#g;
+ s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+ s#__DATABASE_INT_IP__#${DATABASE_INT_IP:-}#g;
+ s#__DATABASE_EXTERNAL_SERVICE_HOST_OR_IP__#${DATABASE_EXTERNAL_SERVICE_HOST_OR_IP:-}#g;
+ s#__DATABASE_POSTGRESQL_VERSION__#${DATABASE_POSTGRESQL_VERSION}#g;
+ s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
+ s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
+ s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
+ s#__RELEASE__#${RELEASE}#g;
+ s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
+ s#__VERSION__#${VERSION}#g;
+ s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
+ s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
+ s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
+ s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
+ s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
+ s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
+ s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
+ s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
+ s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
+ s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
+ s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
+ s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
+ s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
+ s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
+ s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
+ s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION:-}#g;
+ s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g;
+ s#__CONTROLLER_MAX_WORKERS__#${CONTROLLER_MAX_WORKERS:-}#g;
+ s#__CONTROLLER_MAX_QUEUED_REQUESTS__#${CONTROLLER_MAX_QUEUED_REQUESTS:-128}#g;
+ s#__CONTROLLER_MAX_GATEWAY_TUNNELS__#${CONTROLLER_MAX_GATEWAY_TUNNELS:-1000}#g;
+ s#__MONITORING_USERNAME__#${MONITORING_USERNAME}#g;
+ s#__MONITORING_EMAIL__#${MONITORING_EMAIL}#g;
+ s#__MONITORING_PASSWORD__#${MONITORING_PASSWORD}#g;
+ s#__DISPATCHER_SSH_PRIVKEY__#${DISPATCHER_SSH_PRIVKEY//$'\n'/\\n}#g;
+ s#__ENABLE_BALANCER__#${ENABLE_BALANCER}#g;
+ s#__DISABLED_CONTROLLER__#${DISABLED_CONTROLLER}#g;
+ s#__BALANCER_NODENAME__#${ROLE2NODES['balancer']:-}#g;
+ s#__PROMETHEUS_NODENAME__#${ROLE2NODES['monitoring']:-}#g;
+ s#__PROMETHEUS_DATA_RETENTION_TIME__#${PROMETHEUS_DATA_RETENTION_TIME:-15d}#g;
+ s#__CONTROLLER_NODES__#${ROLE2NODES['controller']:-}#g;
+ s#__NODELIST__#${NODELIST}#g;
+ s#__DISPATCHER_INT_IP__#${DISPATCHER_INT_IP}#g;
+ s#__KEEPBALANCE_INT_IP__#${KEEPBALANCE_INT_IP}#g;
+ s#__COMPUTE_AMI__#${COMPUTE_AMI:-}#g;
+ s#__COMPUTE_SG__#${COMPUTE_SG:-}#g;
+ s#__COMPUTE_SUBNET__#${COMPUTE_SUBNET:-}#g;
+ s#__COMPUTE_AWS_REGION__#${COMPUTE_AWS_REGION:-}#g;
+ s#__COMPUTE_USER__#${COMPUTE_USER:-}#g;
+ s#__KEEP_AWS_S3_BUCKET__#${KEEP_AWS_S3_BUCKET:-}#g;
+ s#__KEEP_AWS_IAM_ROLE__#${KEEP_AWS_IAM_ROLE:-}#g;
+ s#__KEEP_AWS_REGION__#${KEEP_AWS_REGION:-}#g" \
+ "${SRCFILE}" > "${DSTFILE}"
+}
+
DEV_MODE="no"
CONFIG_FILE="${SCRIPT_DIR}/local.params"
CONFIG_DIR="local_config_dir"
USE_LETSENCRYPT_ROUTE53="no"
CUSTOM_CERTS_DIR="${SCRIPT_DIR}/local_config_dir/certs"
+GRAFANA_DASHBOARDS_DIR="${SCRIPT_DIR}/local_config_dir/dashboards"
+
## These are ARVADOS-related parameters
# For a stable release, change RELEASE "production" and VERSION to the
# package version (including the iteration, e.g. X.Y.Z-1) of the
# ARVADOS_TAG="2.2.0"
# BRANCH="main"
+# We pin the salt version to avoid potential incompatibilities when a new
+# stable version is released.
+SALT_VERSION="3006"
+
# Other formula versions we depend on
-POSTGRES_TAG="v0.44.0"
+POSTGRES_TAG="7529300c287b1c288af0f494ca668c2217bd1c5d"
+POSTGRES_URL="https://github.com/saltstack-formulas/postgres-formula.git"
NGINX_TAG="v2.8.1"
DOCKER_TAG="v2.4.2"
-LOCALE_TAG="v0.3.4"
-LETSENCRYPT_TAG="v2.1.0"
+LOCALE_TAG="v0.3.5"
+LETSENCRYPT_TAG="v3.2.0"
+LOGROTATE_TAG="v0.14.0"
+PROMETHEUS_TAG="v5.6.5"
+GRAFANA_TAG="v3.1.3"
# Salt's dir
DUMP_SALT_CONFIG_DIR=""
## states
S_DIR="/srv/salt"
+STATES_TOP=${S_DIR}/top.sls
## formulas
F_DIR="/srv/formulas"
## pillars
P_DIR="/srv/pillars"
+PILLARS_TOP=${P_DIR}/top.sls
## tests
T_DIR="/tmp/cluster_tests"
arguments ${@}
-if [ -s ${CONFIG_FILE} ]; then
- source ${CONFIG_FILE}
-else
- echo >&2 "You don't seem to have a config file with initial values."
- echo >&2 "Please create a '${CONFIG_FILE}' file as described in"
- echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
- echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
- exit 1
-fi
+declare -A NODES
+declare -A ROLE2NODES
+declare NODELIST
+
+source common.sh
if [ ! -d ${CONFIG_DIR} ]; then
echo >&2 "You don't seem to have a config directory with pillars and states."
exit 1
fi
-if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
- echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
+if grep -rni 'fixme' ${CONFIG_FILE}.secrets ${CONFIG_FILE} ${CONFIG_DIR} ; then
+ echo >&2 "The config files has some parameters that need to be modified."
echo >&2 "Please, fix them and re-run the provision script."
exit 1
fi
fi
# Only used in single_host/single_name deploys
-if [ ! -z "${HOSTNAME_EXT}" ] ; then
+if [ ! -z "${HOSTNAME_EXT:-}" ] ; then
# We need to add some extra control vars to manage a single certificate vs. multiple
USE_SINGLE_HOSTNAME="yes"
# Make sure that the value configured as IP_INT is a real IP on the system.
USE_SINGLE_HOSTNAME="no"
# We set this variable, anyway, so sed lines do not fail and we don't need to add more
# conditionals
- HOSTNAME_EXT="${CLUSTER}.${DOMAIN}"
+ HOSTNAME_EXT="${DOMAIN}"
fi
if [ "${DUMP_CONFIG}" = "yes" ]; then
echo "The provision installer will just dump a config under ${DUMP_SALT_CONFIG_DIR} and exit"
else
- # Install a few dependency packages
- # First, let's figure out the OS we're working on
- OS_ID=$(grep ^ID= /etc/os-release |cut -f 2 -d= |cut -f 2 -d \")
- echo "Detected distro: ${OS_ID}"
-
- case ${OS_ID} in
- "centos")
- echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
- sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
- setenforce permissive
- yum install -y curl git jq
- ;;
- "debian"|"ubuntu")
- # Wait 2 minutes for any apt locks to clear
- # This option is supported from apt 1.9.1 and ignored in older apt versions.
- # Cf. https://blog.sinjakli.co.uk/2021/10/25/waiting-for-apt-locks-without-the-hacky-bash-scripts/
- DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
- DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
- ;;
- esac
+ OS_IDS="$(. /etc/os-release && echo "${ID:-} ${ID_LIKE:-}")"
+ echo "Detected distro families: $OS_IDS"
+
+ # Several of our formulas use the cron module, which requires the crontab
+ # command. We install systemd-cron to ensure we have that.
+ # The rest of these packages are required by the rest of the script.
+ for OS_ID in $OS_IDS; do
+ case "$OS_ID" in
+ rhel)
+ echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
+ sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
+ setenforce permissive
+ yum install -y curl git jq systemd-cron
+ break
+ ;;
+ debian)
+ DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
+ DEBIAN_FRONTEND=noninteractive apt install -y curl git jq systemd-cron
+ break
+ ;;
+ esac
+ done
if which salt-call; then
echo "Salt already installed"
else
curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
- sh /tmp/bootstrap_salt.sh -XdfP -x python3
+ sh /tmp/bootstrap_salt.sh -XdfP -x python3 stable ${SALT_VERSION}
/bin/systemctl stop salt-minion.service
/bin/systemctl disable salt-minion.service
fi
# Get the formula and dependencies
cd ${F_DIR} || exit 1
echo "Cloning formulas"
-rm -rf ${F_DIR}/* || exit 1
-git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
-( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" -b "${DOCKER_TAG}" )
+test -d docker && ( cd docker && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
+( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" )
echo "...locale"
-git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
-( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" -b "${LOCALE_TAG}" )
+test -d locale && ( cd locale && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
+( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" )
echo "...nginx"
-git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
-( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" -b "${NGINX_TAG}" )
+test -d nginx && ( cd nginx && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
+( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" )
echo "...postgres"
-git clone --quiet https://github.com/saltstack-formulas/postgres-formula.git ${F_DIR}/postgres
-( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" -b "${POSTGRES_TAG}" )
+test -d postgres && ( cd postgres && git fetch ) \
+ || git clone --quiet ${POSTGRES_URL} ${F_DIR}/postgres
+( cd postgres && git checkout --quiet "${POSTGRES_TAG}" )
+
+echo "...prometheus"
+test -d prometheus && ( cd prometheus && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/prometheus-formula.git ${F_DIR}/prometheus
+( cd prometheus && git checkout --quiet tags/"${PROMETHEUS_TAG}" )
+
+echo "...grafana"
+test -d grafana && ( cd grafana && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/grafana-formula.git ${F_DIR}/grafana
+( cd grafana && git checkout --quiet "${GRAFANA_TAG}" )
echo "...letsencrypt"
-git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
-( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" -b "${LETSENCRYPT_TAG}" )
+test -d letsencrypt && ( cd letsencrypt && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
+( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" )
+
+echo "...logrotate"
+test -d logrotate && ( cd logrotate && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/logrotate-formula.git ${F_DIR}/logrotate
+( cd logrotate && git checkout --quiet tags/"${LOGROTATE_TAG}" )
echo "...arvados"
-git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
+test -d arvados || git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
# If we want to try a specific branch of the formula
-if [ "x${BRANCH}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${BRANCH}" ]; then
- ( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
-elif [ "x${ARVADOS_TAG}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${ARVADOS_TAG}" ]; then
-( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
+if [[ ! -z "${BRANCH:-}" && "x${BRANCH}" != "xmain" ]]; then
+ ( cd ${F_DIR}/arvados && git fetch && git checkout --quiet "${BRANCH}" || git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
+elif [ "x${ARVADOS_TAG:-}" != "x" ]; then
+ ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
fi
-if [ "x${VAGRANT}" = "xyes" ]; then
+if [ "x${VAGRANT:-}" = "xyes" ]; then
EXTRA_STATES_DIR="/home/vagrant/${CONFIG_DIR}/states"
SOURCE_PILLARS_DIR="/home/vagrant/${CONFIG_DIR}/pillars"
+ SOURCE_TOFS_DIR="/home/vagrant/${CONFIG_DIR}/tofs"
SOURCE_TESTS_DIR="/home/vagrant/${TESTS_DIR}"
else
EXTRA_STATES_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/states"
SOURCE_PILLARS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/pillars"
+ SOURCE_TOFS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/tofs"
SOURCE_TESTS_DIR="${SCRIPT_DIR}/${TESTS_DIR}"
fi
exit 1
fi
for f in $(ls "${SOURCE_PILLARS_DIR}"/*); do
- sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
- s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
- s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
- s#__CLUSTER__#${CLUSTER}#g;
- s#__DOMAIN__#${DOMAIN}#g;
- s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
- s#__IP_INT__#${IP_INT}#g;
- s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
- s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
- s#__INITIAL_USER__#${INITIAL_USER}#g;
- s#__LE_AWS_REGION__#${LE_AWS_REGION}#g;
- s#__LE_AWS_SECRET_ACCESS_KEY__#${LE_AWS_SECRET_ACCESS_KEY}#g;
- s#__LE_AWS_ACCESS_KEY_ID__#${LE_AWS_ACCESS_KEY_ID}#g;
- s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
- s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
- s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
- s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
- s#__RELEASE__#${RELEASE}#g;
- s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
- s#__VERSION__#${VERSION}#g;
- s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
- s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
- s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
- s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
- s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
- s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
- s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
- s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
- s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
- s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
- s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
- s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
- s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
- s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
- s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
- s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
- s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
- "${f}" > "${P_DIR}"/$(basename "${f}")
+ apply_var_substitutions "${f}" "${P_DIR}"/$(basename "${f}")
done
if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
- if [ "x${TEST}" = "xyes" ]; then
+ if [ "x${TEST:-}" = "xyes" ]; then
echo "WARNING: Disabling tests for this installation."
fi
TEST="no"
# Replace helper state files that differ from the formula's examples
if [ -d "${SOURCE_STATES_DIR}" ]; then
mkdir -p "${F_DIR}"/extra/extra
+ rm -rf "${F_DIR}"/extra/extra/*
for f in $(ls "${SOURCE_STATES_DIR}"/*); do
- sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
- s#__CLUSTER__#${CLUSTER}#g;
- s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
- s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
- s#__DOMAIN__#${DOMAIN}#g;
- s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
- s#__IP_INT__#${IP_INT}#g;
- s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
- s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
- s#__INITIAL_USER__#${INITIAL_USER}#g;
- s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
- s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
- s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
- s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
- s#__RELEASE__#${RELEASE}#g;
- s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
- s#__VERSION__#${VERSION}#g;
- s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
- s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
- s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
- s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
- s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
- s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
- s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
- s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
- s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
- s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
- s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
- s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
- s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
- s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
- s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
- s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
- s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
- "${f}" > "${F_DIR}/extra/extra"/$(basename "${f}")
+ apply_var_substitutions "${f}" "${F_DIR}/extra/extra"/$(basename "${f}")
done
fi
# As we need to separate both states and pillars in case we want specific
# roles, we iterate on both at the same time
+# Formula template overrides (TOFS)
+# See: https://template-formula.readthedocs.io/en/latest/TOFS_pattern.html#template-override
+if [ -d ${SOURCE_TOFS_DIR} ]; then
+ find ${SOURCE_TOFS_DIR} -mindepth 1 -maxdepth 1 -type d -exec cp -r "{}" ${S_DIR} \;
+fi
+
# States
-cat > ${S_DIR}/top.sls << EOFTSLS
+cat > ${STATES_TOP} << EOFTSLS
base:
'*':
- locale
EOFTSLS
# Pillars
-cat > ${P_DIR}/top.sls << EOFPSLS
+cat > ${PILLARS_TOP} << EOFPSLS
base:
'*':
- locale
SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
fi
for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
- echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
+ echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${STATES_TOP}
done
# Use byo or self-signed certificates
if [ "${SSL_MODE}" != "lets-encrypt" ]; then
# If we want specific roles for a node, just add the desired states
# and its dependencies
-if [ -z "${ROLES}" ]; then
+if [ -z "${ROLES:-}" ]; then
# States
- echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ echo " - nginx.passenger" >> ${STATES_TOP}
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
- grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - extra.aws_credentials" >> ${S_DIR}/top.sls
+ grep -q "aws_credentials" ${STATES_TOP} || echo " - extra.aws_credentials" >> ${STATES_TOP}
fi
- grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
else
- mkdir -p /srv/salt/certs
+ mkdir -p --mode=0700 /srv/salt/certs
if [ "${SSL_MODE}" = "bring-your-own" ]; then
# Copy certs to formula extra/files
- cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
+ install --mode=0600 ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
# We add the custom_certs state
- grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ grep -q "custom_certs" ${STATES_TOP} || echo " - extra.custom_certs" >> ${STATES_TOP}
+ if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
+ grep -q "ssl_key_encrypted" ${STATES_TOP} || echo " - extra.ssl_key_encrypted" >> ${STATES_TOP}
+ fi
fi
# In self-signed mode, the certificate files will be created and put in the
# destination directory by the snakeoil_certs.sls state file
fi
- echo " - postgres" >> ${S_DIR}/top.sls
- echo " - docker.software" >> ${S_DIR}/top.sls
- echo " - arvados" >> ${S_DIR}/top.sls
- echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
- echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
- echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
+ echo " - postgres" >> ${STATES_TOP}
+ echo " - logrotate" >> ${STATES_TOP}
+ echo " - docker.software" >> ${STATES_TOP}
+ echo " - arvados.repo" >> ${STATES_TOP}
+ echo " - arvados.config" >> ${STATES_TOP}
+ echo " - arvados.ruby" >> ${STATES_TOP}
+ echo " - arvados.api" >> ${STATES_TOP}
+ echo " - arvados.controller" >> ${STATES_TOP}
+ echo " - arvados.keepstore" >> ${STATES_TOP}
+ echo " - arvados.websocket" >> ${STATES_TOP}
+ echo " - arvados.keepweb" >> ${STATES_TOP}
+ echo " - arvados.workbench2" >> ${STATES_TOP}
+ echo " - arvados.keepproxy" >> ${STATES_TOP}
+ echo " - arvados.shell" >> ${STATES_TOP}
+ echo " - arvados.dispatcher" >> ${STATES_TOP}
+ echo " - extra.shell_sudo_passwordless" >> ${STATES_TOP}
+ echo " - extra.shell_cron_add_login_sync" >> ${STATES_TOP}
+ echo " - extra.passenger_rvm" >> ${STATES_TOP}
+ echo " - extra.workbench1_uninstall" >> ${STATES_TOP}
# Pillars
- echo " - docker" >> ${P_DIR}/top.sls
- echo " - nginx_api_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_controller_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_keepproxy_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_keepweb_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_passenger" >> ${P_DIR}/top.sls
- echo " - nginx_websocket_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_webshell_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_workbench2_configuration" >> ${P_DIR}/top.sls
- echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
- echo " - postgresql" >> ${P_DIR}/top.sls
+ echo " - docker" >> ${PILLARS_TOP}
+ echo " - nginx_api_configuration" >> ${PILLARS_TOP}
+ echo " - logrotate" >> ${PILLARS_TOP}
+ echo " - logrotate_api" >> ${PILLARS_TOP}
+ echo " - nginx_controller_configuration" >> ${PILLARS_TOP}
+ echo " - nginx_keepproxy_configuration" >> ${PILLARS_TOP}
+ echo " - nginx_keepweb_configuration" >> ${PILLARS_TOP}
+ echo " - nginx_passenger" >> ${PILLARS_TOP}
+ echo " - nginx_websocket_configuration" >> ${PILLARS_TOP}
+ echo " - nginx_webshell_configuration" >> ${PILLARS_TOP}
+ echo " - nginx_workbench2_configuration" >> ${PILLARS_TOP}
+ echo " - nginx_workbench_configuration" >> ${PILLARS_TOP}
+ echo " - logrotate_wb1" >> ${PILLARS_TOP}
+ echo " - postgresql" >> ${PILLARS_TOP}
# We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
- grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
+ grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
fi
- grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
+ grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
hosts=("controller" "websocket" "workbench" "workbench2" "webshell" "keepproxy")
if [ ${USE_SINGLE_HOSTNAME} = "no" ]; then
CERT_NAME=${HOSTNAME_EXT}
else
# We are in a multiple-hostnames env
- CERT_NAME=${c}.${CLUSTER}.${DOMAIN}
+ CERT_NAME=${c}.${DOMAIN}
fi
# As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
done
else
# Use custom certs (either dev mode or prod)
- grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
+ grep -q "extra_custom_certs" ${PILLARS_TOP} || echo " - extra_custom_certs" >> ${PILLARS_TOP}
# And add the certs in the custom_certs pillar
echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
grep -q ${CERT_NAME} ${P_DIR}/extra_custom_certs.sls || echo " - ${CERT_NAME}" >> ${P_DIR}/extra_custom_certs.sls
# As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
- sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${CERT_NAME}.pem/g;
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${CERT_NAME}_cert_file_copy/g;
s#__CERT_PEM__#/etc/nginx/ssl/arvados-${CERT_NAME}.pem#g;
s#__CERT_KEY__#/etc/nginx/ssl/arvados-${CERT_NAME}.key#g" \
${P_DIR}/nginx_${c}_configuration.sls
fi
else
# If we add individual roles, make sure we add the repo first
- echo " - arvados.repo" >> ${S_DIR}/top.sls
+ echo " - arvados.repo" >> ${STATES_TOP}
# We add the extra_custom_certs state
- grep -q "extra.custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ grep -q "extra.custom_certs" ${STATES_TOP} || echo " - extra.custom_certs" >> ${STATES_TOP}
+ if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
+ grep -q "ssl_key_encrypted" ${STATES_TOP} || echo " - extra.ssl_key_encrypted" >> ${STATES_TOP}
+ fi
# And we add the basic part for the certs pillar
if [ "${SSL_MODE}" != "lets-encrypt" ]; then
# And add the certs in the custom_certs pillar
echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
- grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
+ grep -q "extra_custom_certs" ${PILLARS_TOP} || echo " - extra_custom_certs" >> ${PILLARS_TOP}
fi
- for R in ${ROLES}; do
+ # Prometheus state on all nodes due to the node exporter below
+ grep -q "\- prometheus$" ${STATES_TOP} || echo " - prometheus" >> ${STATES_TOP}
+ # Prometheus node exporter pillar
+ grep -q "prometheus_node_exporter" ${PILLARS_TOP} || echo " - prometheus_node_exporter" >> ${PILLARS_TOP}
+
+ for R in ${ROLES:-}; do
case "${R}" in
"database")
# States
- echo " - postgres" >> ${S_DIR}/top.sls
+ grep -q "\- postgres$" ${STATES_TOP} || echo " - postgres" >> ${STATES_TOP}
+ grep -q "extra.prometheus_pg_exporter" ${STATES_TOP} || echo " - extra.prometheus_pg_exporter" >> ${STATES_TOP}
# Pillars
- echo ' - postgresql' >> ${P_DIR}/top.sls
+ grep -q "postgresql" ${PILLARS_TOP} || echo " - postgresql" >> ${PILLARS_TOP}
+ grep -q "prometheus_pg_exporter" ${PILLARS_TOP} || echo " - prometheus_pg_exporter" >> ${PILLARS_TOP}
;;
- "api")
- # States
- # FIXME: https://dev.arvados.org/issues/17352
- grep -q "postgres.client" ${S_DIR}/top.sls || echo " - postgres.client" >> ${S_DIR}/top.sls
- if grep -q " - nginx.*$" ${S_DIR}/top.sls; then
- sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
- else
- echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ "monitoring")
+ ### Support files ###
+ GRAFANA_DASHBOARDS_DEST_DIR=/srv/salt/dashboards
+ mkdir -p "${GRAFANA_DASHBOARDS_DEST_DIR}"
+ rm -f "${GRAFANA_DASHBOARDS_DEST_DIR}"/*
+ # "ArvadosPromDataSource" is the hardcoded UID for Prometheus' datasource
+ # in Grafana.
+ for f in $(ls "${GRAFANA_DASHBOARDS_DIR}"/*.json); do
+ sed "s#__TLS_EXPIRATION_YELLOW__#${TLS_EXPIRATION_YELLOW}#g;
+ s#__TLS_EXPIRATION_GREEN__#${TLS_EXPIRATION_GREEN}#g;
+ s#\${DS_PROMETHEUS}#ArvadosPromDataSource#g" \
+ "${f}" > "${GRAFANA_DASHBOARDS_DEST_DIR}"/$(basename "${f}")
+ done
+
+ ### States ###
+ grep -q "\- nginx$" ${STATES_TOP} || echo " - nginx" >> ${STATES_TOP}
+ grep -q "extra.nginx_prometheus_configuration" ${STATES_TOP} || echo " - extra.nginx_prometheus_configuration" >> ${STATES_TOP}
+
+ grep -q "\- grafana$" ${STATES_TOP} || echo " - grafana" >> ${STATES_TOP}
+ grep -q "extra.grafana_datasource" ${STATES_TOP} || echo " - extra.grafana_datasource" >> ${STATES_TOP}
+ grep -q "extra.grafana_dashboards" ${STATES_TOP} || echo " - extra.grafana_dashboards" >> ${STATES_TOP}
+ grep -q "extra.grafana_admin_user" ${STATES_TOP} || echo " - extra.grafana_admin_user" >> ${STATES_TOP}
+
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
+ if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
+ grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
+ fi
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ for SVC in grafana prometheus; do
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${SVC}
+ done
fi
- echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
- ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
- ### after it. So we add this here as we are, after all, sharing the host for api and controller
+ ### Pillars ###
+ grep -q "prometheus_server" ${PILLARS_TOP} || echo " - prometheus_server" >> ${PILLARS_TOP}
+ grep -q "grafana" ${PILLARS_TOP} || echo " - grafana" >> ${PILLARS_TOP}
+ for SVC in grafana prometheus; do
+ grep -q "nginx_${SVC}_configuration" ${PILLARS_TOP} || echo " - nginx_${SVC}_configuration" >> ${PILLARS_TOP}
+ done
+ grep -q "nginx_snippets" ${PILLARS_TOP} || echo " - nginx_snippets" >> ${PILLARS_TOP}
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
+ for SVC in grafana prometheus; do
+ grep -q "letsencrypt_${SVC}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${SVC}_configuration" >> ${PILLARS_TOP}
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${SVC}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${SVC}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${SVC}.${DOMAIN}/privkey.pem#g" \
+ ${P_DIR}/nginx_${SVC}_configuration.sls
+ done
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
+ fi
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
+ for SVC in grafana prometheus; do
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${SVC}_cert_file_copy/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${SVC}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${SVC}.key#g" \
+ ${P_DIR}/nginx_${SVC}_configuration.sls
+ grep -q ${SVC} ${P_DIR}/extra_custom_certs.sls || echo " - ${SVC}" >> ${P_DIR}/extra_custom_certs.sls
+ done
+ fi
+ ;;
+ "balancer")
+ ### States ###
+ grep -q "\- nginx$" ${STATES_TOP} || echo " - nginx" >> ${STATES_TOP}
+
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
+ if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
+ grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
+ fi
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
+ fi
+
+ ### Pillars ###
+ grep -q "nginx_${R}_configuration" ${PILLARS_TOP} || echo " - nginx_${R}_configuration" >> ${PILLARS_TOP}
+
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
+
+ grep -q "letsencrypt_${R}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${R}_configuration" >> ${PILLARS_TOP}
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${ROLE2NODES['balancer']}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${ROLE2NODES['balancer']}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${ROLE2NODES['balancer']}/privkey.pem#g" \
+ ${P_DIR}/nginx_${R}_configuration.sls
+
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
- grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
+ grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
fi
- grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${R}_cert_file_copy/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
+ ${P_DIR}/nginx_${R}_configuration.sls
+ grep -q "${R}" ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
+ fi
+ ;;
+ "controller")
+ ### States ###
+ grep -q " - logrotate" ${STATES_TOP} || echo " - logrotate" >> ${STATES_TOP}
+ if grep -q " - nginx.*$" ${STATES_TOP}; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${STATES_TOP}
else
- # Use custom certs
- if [ "${SSL_MODE}" = "bring-your-own" ]; then
- copy_custom_cert ${CUSTOM_CERTS_DIR} controller
+ echo " - nginx.passenger" >> ${STATES_TOP}
+ fi
+ echo " - extra.passenger_rvm" >> ${STATES_TOP}
+ grep -q "^ - postgres\\.client$" ${STATES_TOP} || echo " - postgres.client" >> ${STATES_TOP}
+
+ ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
+ ### after it. So we add this here as we are, after all, sharing the host for api and controller
+ if [ "${ENABLE_BALANCER}" == "no" ]; then
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
+ grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
+ fi
+ grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
+ grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
fi
- grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
fi
- grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
- # Pillars
- grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
- grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
- grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
- grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
+ grep -q "arvados.api" ${STATES_TOP} || echo " - arvados.api" >> ${STATES_TOP}
+ grep -q "arvados.controller" ${STATES_TOP} || echo " - arvados.controller" >> ${STATES_TOP}
+
+ ### Pillars ###
+ grep -q "logrotate" ${PILLARS_TOP} || echo " - logrotate" >> ${PILLARS_TOP}
+ grep -q "logrotate_api" ${PILLARS_TOP} || echo " - logrotate_api" >> ${PILLARS_TOP}
+ grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
+ grep -q "postgresql" ${PILLARS_TOP} || echo " - postgresql" >> ${PILLARS_TOP}
+ grep -q "nginx_passenger" ${PILLARS_TOP} || echo " - nginx_passenger" >> ${PILLARS_TOP}
+ grep -q "nginx_snippets" ${PILLARS_TOP} || echo " - nginx_snippets" >> ${PILLARS_TOP}
+ grep -q "nginx_api_configuration" ${PILLARS_TOP} || echo " - nginx_api_configuration" >> ${PILLARS_TOP}
+ grep -q "nginx_controller_configuration" ${PILLARS_TOP} || echo " - nginx_controller_configuration" >> ${PILLARS_TOP}
+
+ if [ "${ENABLE_BALANCER}" == "no" ]; then
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
+ fi
+ grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
+ grep -q "letsencrypt_${R}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${R}_configuration" >> ${PILLARS_TOP}
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${DOMAIN}/privkey.pem#g" \
+ ${P_DIR}/nginx_${R}_configuration.sls
+ else
+ grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${R}_cert_file_copy/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
+ ${P_DIR}/nginx_${R}_configuration.sls
+ grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
+ fi
+ fi
# We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
;;
- "controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
- NGINX_INSTALL_SOURCE="install_from_repo"
- # States
- if [ "${R}" = "workbench" ]; then
- NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
- if grep -q " - nginx$" ${S_DIR}/top.sls; then
- sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
- else
- echo " - nginx.passenger" >> ${S_DIR}/top.sls
- fi
- else
- grep -q "nginx" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
- fi
+ "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
+ ### States ###
+ grep -q "\- nginx$" ${STATES_TOP} || echo " - nginx" >> ${STATES_TOP}
+
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
- if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
- grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
+ if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
+ grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
fi
- grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
else
# Use custom certs, special case for keepweb
if [ ${R} = "keepweb" ]; then
fi
fi
fi
+
# webshell role is just a nginx vhost, so it has no state
- if [ "${R}" != "webshell" ]; then
- grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ # workbench role is deprecated since 2.7.0
+ if [[ "${R}" != "webshell" && "${R}" != "workbench" ]]; then
+ grep -q "arvados.${R}" ${STATES_TOP} || echo " - arvados.${R}" >> ${STATES_TOP}
fi
- # Pillars
- grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
- grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
+ # Make sure wb1's package get uninstalled
+ if [[ "${R}" == "workbench" ]]; then
+ grep -q "workbench1_uninstall" ${STATES_TOP} || echo " - extra.workbench1_uninstall" >> ${STATES_TOP}
+ fi
+
+ ### Pillars ###
+ grep -q "nginx_${R}_configuration" ${PILLARS_TOP} || echo " - nginx_${R}_configuration" >> ${PILLARS_TOP}
+ grep -q "nginx_snippets" ${PILLARS_TOP} || echo " - nginx_snippets" >> ${PILLARS_TOP}
# Special case for keepweb
if [ ${R} = "keepweb" ]; then
- grep -q "nginx_download_configuration" ${P_DIR}/top.sls || echo " - nginx_download_configuration" >> ${P_DIR}/top.sls
- grep -q "nginx_collections_configuration" ${P_DIR}/top.sls || echo " - nginx_collections_configuration" >> ${P_DIR}/top.sls
+ grep -q "nginx_download_configuration" ${PILLARS_TOP} || echo " - nginx_download_configuration" >> ${PILLARS_TOP}
+ grep -q "nginx_collections_configuration" ${PILLARS_TOP} || echo " - nginx_collections_configuration" >> ${PILLARS_TOP}
fi
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
- grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
+ grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
fi
- grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
- grep -q "letsencrypt_${R}_configuration" ${P_DIR}/top.sls || echo " - letsencrypt_${R}_configuration" >> ${P_DIR}/top.sls
+ grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
+ grep -q "letsencrypt_${R}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${R}_configuration" >> ${PILLARS_TOP}
# As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
# Special case for keepweb
if [ ${R} = "keepweb" ]; then
for kwsub in download collections; do
- sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${kwsub}.${CLUSTER}.${DOMAIN}*/g;
- s#__CERT_PEM__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
- s#__CERT_KEY__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${kwsub}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${kwsub}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${kwsub}.${DOMAIN}/privkey.pem#g" \
${P_DIR}/nginx_${kwsub}_configuration.sls
done
else
- sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${CLUSTER}.${DOMAIN}*/g;
- s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
- s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${DOMAIN}/privkey.pem#g" \
${P_DIR}/nginx_${R}_configuration.sls
fi
else
+ grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
# As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
# Special case for keepweb
if [ ${R} = "keepweb" ]; then
for kwsub in download collections; do
- sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${kwsub}.pem/g;
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${kwsub}_cert_file_copy/g;
s#__CERT_PEM__#/etc/nginx/ssl/arvados-${kwsub}.pem#g;
s#__CERT_KEY__#/etc/nginx/ssl/arvados-${kwsub}.key#g" \
${P_DIR}/nginx_${kwsub}_configuration.sls
grep -q ${kwsub} ${P_DIR}/extra_custom_certs.sls || echo " - ${kwsub}" >> ${P_DIR}/extra_custom_certs.sls
done
else
- sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${R}.pem/g;
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${R}_cert_file_copy/g;
s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
${P_DIR}/nginx_${R}_configuration.sls
- grep -q ${R}$ ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
+ grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
fi
fi
# We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
;;
"shell")
# States
- echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
- echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
- grep -q "docker" ${S_DIR}/top.sls || echo " - docker.software" >> ${S_DIR}/top.sls
- grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ echo " - extra.shell_sudo_passwordless" >> ${STATES_TOP}
+ echo " - extra.shell_cron_add_login_sync" >> ${STATES_TOP}
+ grep -q "docker" ${STATES_TOP} || echo " - docker.software" >> ${STATES_TOP}
+ grep -q "arvados.${R}" ${STATES_TOP} || echo " - arvados.${R}" >> ${STATES_TOP}
# Pillars
- grep -q "docker" ${P_DIR}/top.sls || echo " - docker" >> ${P_DIR}/top.sls
+ grep -q "docker" ${PILLARS_TOP} || echo " - docker" >> ${PILLARS_TOP}
;;
"dispatcher" | "keepbalance" | "keepstore")
# States
- grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ grep -q "arvados.${R}" ${STATES_TOP} || echo " - arvados.${R}" >> ${STATES_TOP}
# Pillars
# ATM, no specific pillar needed
;;
fi
# Now run the install
-salt-call --local state.apply -l ${LOG_LEVEL}
+salt-call --state-output=mixed --local state.apply -l ${LOG_LEVEL}
# Finally, make sure that /etc/hosts is not overwritten on reboot
if [ -d /etc/cloud/cloud.cfg.d ]; then
fi
# Leave a copy of the Arvados CA so the user can copy it where it's required
-if [ "$DEV_MODE" = "yes" ]; then
- ARVADOS_SNAKEOIL_CA_DEST_FILE="${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
+if [ "${SSL_MODE}" = "self-signed" ]; then
+ echo "Copying the Arvados CA certificate '${DOMAIN}-arvados-snakeoil-ca.crt' to the installer dir, so you can import it"
+ if [ "x${VAGRANT:-}" = "xyes" ]; then
+ cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${DOMAIN}-arvados-snakeoil-ca.pem
+ else
+ cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${DOMAIN}-arvados-snakeoil-ca.crt
+ fi
+fi
- # If running in a vagrant VM, also add default user to docker group
- if [ "x${VAGRANT}" = "xyes" ]; then
+if [ "x${VAGRANT:-}" = "xyes" ]; then
+ # If running in a vagrant VM, also add default user to docker group
echo "Adding the vagrant user to the docker group"
usermod -a -G docker vagrant
- ARVADOS_SNAKEOIL_CA_DEST_FILE="/vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
- fi
- if [ -f /etc/ssl/certs/arvados-snakeoil-ca.pem ]; then
- echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
- cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${ARVADOS_SNAKEOIL_CA_DEST_FILE}
- fi
fi
# Test that the installation finished correctly
-if [ "x${TEST}" = "xyes" ]; then
+if [ "x${TEST:-}" = "xyes" ]; then
cd ${T_DIR}
# If we use RVM, we need to run this with it, or most ruby commands will fail
RVM_EXEC=""
projects / arvados.git / blobdiff