3 # Copyright (C) The Arvados Authors. All rights reserved.
5 # SPDX-License-Identifier: CC-BY-SA-3.0
7 # If you want to test arvados in a single host, you can run this script, which
8 # will install it using salt masterless
9 # This script is run by the Vagrant file when you run it with
15 # capture the directory that the script is running from
16 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
20 echo >&2 "Usage: ${0} [-h] [-h]"
22 echo >&2 "${0} options:"
23 echo >&2 " -d, --debug Run salt installation in debug mode"
24 echo >&2 " -c <local.params>, --config <local.params> Path to the local.params config file"
25 echo >&2 " -t, --test Test installation running a CWL workflow"
26 echo >&2 " -r, --roles List of Arvados roles to apply to the host, comma separated"
27 echo >&2 " Possible values are:"
29 echo >&2 " controller"
30 echo >&2 " dispatcher"
32 echo >&2 " keepbalance"
35 echo >&2 " monitoring"
40 echo >&2 " workbench2"
41 echo >&2 " Defaults to applying them all"
42 echo >&2 " -h, --help Display this help and exit"
43 echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
44 echo >&2 " This parameter does not perform any installation at all. It's"
45 echo >&2 " intended to give you a parsed set of configuration files so"
46 echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
48 echo >&2 " - parses the pillar and states templates,"
49 echo >&2 " - downloads the helper formulas with their desired versions,"
50 echo >&2 " - prepares the 'top.sls' files both for pillars and states"
51 echo >&2 " for the selected role(s)"
52 echo >&2 " - writes the resulting files into <dest_dir>"
53 echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
54 echo >&2 " --development Run in dev mode, using snakeoil certs"
59 # NOTE: This requires GNU getopt (part of the util-linux package on Debian-based distros).
60 if ! which getopt > /dev/null; then
61 echo >&2 "GNU getopt is required to run this script. Please install it and re-reun it"
65 TEMP=$(getopt -o c:dhp:r:tv \
66 --long config:,debug,development,dump-config:,help,roles:,test,vagrant \
70 then echo "Please check the parameters you entered and re-run again"
73 # Note the quotes around `$TEMP': they are essential!
76 while [ ${#} -ge 1 ]; do
88 if [[ ${2} = /* ]]; then
89 DUMP_SALT_CONFIG_DIR=${2}
91 DUMP_SALT_CONFIG_DIR=${PWD}/${2}
94 S_DIR="${DUMP_SALT_CONFIG_DIR}/salt"
96 F_DIR="${DUMP_SALT_CONFIG_DIR}/formulas"
98 P_DIR="${DUMP_SALT_CONFIG_DIR}/pillars"
100 T_DIR="${DUMP_SALT_CONFIG_DIR}/tests"
111 # Verify the role exists
112 if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher,monitoring" == *"$i"* ]]; then
113 echo "The role '${i}' is not a valid role"
117 ROLES="${ROLES} ${i}"
145 mkdir -p --mode=0700 /srv/salt/certs
147 if [ -f ${cert_dir}/${cert_name}.crt ]; then
148 install --mode=0600 ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
150 echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
153 if [ -f ${cert_dir}/${cert_name}.key ]; then
154 install --mode=0600 ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
156 echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
162 CONFIG_FILE="${SCRIPT_DIR}/local.params"
163 CONFIG_DIR="local_config_dir"
166 CONTROLLER_EXT_SSL_PORT=443
169 NGINX_INSTALL_SOURCE="install_from_repo"
174 # Hostnames/IPs used for single-host deploys
179 INITIAL_USER_EMAIL=""
180 INITIAL_USER_PASSWORD=""
182 CONTROLLER_EXT_SSL_PORT=8000
183 KEEP_EXT_SSL_PORT=25101
184 # Both for collections and downloads
185 KEEPWEB_EXT_SSL_PORT=9002
186 WEBSHELL_EXT_SSL_PORT=4202
187 WEBSOCKET_EXT_SSL_PORT=8002
188 WORKBENCH1_EXT_SSL_PORT=443
189 WORKBENCH2_EXT_SSL_PORT=3001
191 SSL_MODE="self-signed"
192 USE_LETSENCRYPT_ROUTE53="no"
193 CUSTOM_CERTS_DIR="${SCRIPT_DIR}/local_config_dir/certs"
195 GRAFANA_DASHBOARDS_DIR="${SCRIPT_DIR}/local_config_dir/dashboards"
197 ## These are ARVADOS-related parameters
198 # For a stable release, change RELEASE "production" and VERSION to the
199 # package version (including the iteration, e.g. X.Y.Z-1) of the
201 # The "local.params.example.*" files already set "RELEASE=production"
202 # to deploy production-ready packages
203 RELEASE="development"
206 # These are arvados-formula-related parameters
207 # An arvados-formula tag. For a stable release, this should be a
208 # branch name (e.g. X.Y-dev) or tag for the release.
209 # ARVADOS_TAG="2.2.0"
212 # We pin the salt version to avoid potential incompatibilities when a new
213 # stable version is released.
216 # Other formula versions we depend on
217 #POSTGRES_TAG="v0.44.0"
218 #POSTGRES_URL="https://github.com/saltstack-formulas/postgres-formula.git"
219 POSTGRES_TAG="0.45.0-bugfix327"
220 POSTGRES_URL="https://github.com/arvados/postgres-formula.git"
224 LETSENCRYPT_TAG="v2.1.0"
225 LOGROTATE_TAG="v0.14.0"
226 PROMETHEUS_TAG="v5.6.5"
230 DUMP_SALT_CONFIG_DIR=""
234 F_DIR="/srv/formulas"
238 T_DIR="/tmp/cluster_tests"
244 if [ -s ${CONFIG_FILE} ]; then
245 source ${CONFIG_FILE}
247 echo >&2 "You don't seem to have a config file with initial values."
248 echo >&2 "Please create a '${CONFIG_FILE}' file as described in"
249 echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
250 echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
254 if [ ! -d ${CONFIG_DIR} ]; then
255 echo >&2 "You don't seem to have a config directory with pillars and states."
256 echo >&2 "Please create a '${CONFIG_DIR}' directory (as configured in your '${CONFIG_FILE}'). Please see"
257 echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
258 echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
262 if grep -rni 'fixme' ${CONFIG_FILE} ${CONFIG_DIR} ; then
263 echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
264 echo >&2 "Please, fix them and re-run the provision script."
268 if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
269 echo >&2 "ERROR: <CLUSTER> must be exactly 5 lowercase alphanumeric characters long"
270 echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
274 # Only used in single_host/single_name deploys
275 if [ ! -z "${HOSTNAME_EXT}" ] ; then
276 # We need to add some extra control vars to manage a single certificate vs. multiple
277 USE_SINGLE_HOSTNAME="yes"
278 # Make sure that the value configured as IP_INT is a real IP on the system.
279 # If we don't error out early here when there is a mismatch, the formula will
280 # fail with hard to interpret nginx errors later on.
281 ip addr list |grep "${IP_INT}/" >/dev/null
282 if [[ $? -ne 0 ]]; then
283 echo "Unable to find the IP_INT address '${IP_INT}' on the system, please correct the value in local.params. Exiting..."
287 USE_SINGLE_HOSTNAME="no"
288 # We set this variable, anyway, so sed lines do not fail and we don't need to add more
290 HOSTNAME_EXT="${CLUSTER}.${DOMAIN}"
293 if [ "${DUMP_CONFIG}" = "yes" ]; then
294 echo "The provision installer will just dump a config under ${DUMP_SALT_CONFIG_DIR} and exit"
296 # Install a few dependency packages
297 # First, let's figure out the OS we're working on
298 OS_ID=$(grep ^ID= /etc/os-release |cut -f 2 -d= |cut -f 2 -d \")
299 echo "Detected distro: ${OS_ID}"
303 echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
304 sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
305 setenforce permissive
306 yum install -y curl git jq
309 # Wait 2 minutes for any apt locks to clear
310 # This option is supported from apt 1.9.1 and ignored in older apt versions.
311 # Cf. https://blog.sinjakli.co.uk/2021/10/25/waiting-for-apt-locks-without-the-hacky-bash-scripts/
312 DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
313 DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
317 if which salt-call; then
318 echo "Salt already installed"
320 curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
321 sh /tmp/bootstrap_salt.sh -XdfP -x python3 stable ${SALT_VERSION}
322 /bin/systemctl stop salt-minion.service
323 /bin/systemctl disable salt-minion.service
326 # Set salt to masterless mode
327 cat > /etc/salt/minion << EOFSM
342 mkdir -p ${S_DIR} ${F_DIR} ${P_DIR} ${T_DIR}
344 # Get the formula and dependencies
345 cd ${F_DIR} || exit 1
346 echo "Cloning formulas"
347 test -d docker && ( cd docker && git fetch ) \
348 || git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
349 ( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" )
352 test -d locale && ( cd locale && git fetch ) \
353 || git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
354 ( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" )
357 test -d nginx && ( cd nginx && git fetch ) \
358 || git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
359 ( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" )
362 test -d postgres && ( cd postgres && git fetch ) \
363 || git clone --quiet ${POSTGRES_URL} ${F_DIR}/postgres
364 ( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" )
367 test -d prometheus && ( cd prometheus && git fetch ) \
368 || git clone --quiet https://github.com/saltstack-formulas/prometheus-formula.git ${F_DIR}/prometheus
369 ( cd prometheus && git checkout --quiet tags/"${PROMETHEUS_TAG}" )
372 test -d grafana && ( cd grafana && git fetch ) \
373 || git clone --quiet https://github.com/saltstack-formulas/grafana-formula.git ${F_DIR}/grafana
374 ( cd grafana && git checkout --quiet "${GRAFANA_TAG}" )
376 echo "...letsencrypt"
377 test -d letsencrypt && ( cd letsencrypt && git fetch ) \
378 || git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
379 ( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" )
382 test -d logrotate && ( cd logrotate && git fetch ) \
383 || git clone --quiet https://github.com/saltstack-formulas/logrotate-formula.git ${F_DIR}/logrotate
384 ( cd logrotate && git checkout --quiet tags/"${LOGROTATE_TAG}" )
387 test -d arvados || git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
389 # If we want to try a specific branch of the formula
390 if [ "x${BRANCH}" != "x" ]; then
391 ( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
392 elif [ "x${ARVADOS_TAG}" != "x" ]; then
393 ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
396 if [ "x${VAGRANT}" = "xyes" ]; then
397 EXTRA_STATES_DIR="/home/vagrant/${CONFIG_DIR}/states"
398 SOURCE_PILLARS_DIR="/home/vagrant/${CONFIG_DIR}/pillars"
399 SOURCE_TESTS_DIR="/home/vagrant/${TESTS_DIR}"
401 EXTRA_STATES_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/states"
402 SOURCE_PILLARS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/pillars"
403 SOURCE_TESTS_DIR="${SCRIPT_DIR}/${TESTS_DIR}"
406 SOURCE_STATES_DIR="${EXTRA_STATES_DIR}"
408 echo "Writing pillars and states"
410 # Replace variables (cluster, domain, etc) in the pillars, states and tests
411 # to ease deployment for newcomers
412 if [ ! -d "${SOURCE_PILLARS_DIR}" ]; then
413 echo "${SOURCE_PILLARS_DIR} does not exist or is not a directory. Exiting."
416 for f in $(ls "${SOURCE_PILLARS_DIR}"/*); do
417 sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
418 s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
419 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
420 s#__CLUSTER__#${CLUSTER}#g;
421 s#__DOMAIN__#${DOMAIN}#g;
422 s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
423 s#__IP_INT__#${IP_INT}#g;
424 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
425 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
426 s#__INITIAL_USER__#${INITIAL_USER}#g;
427 s#__LE_AWS_REGION__#${LE_AWS_REGION}#g;
428 s#__LE_AWS_SECRET_ACCESS_KEY__#${LE_AWS_SECRET_ACCESS_KEY}#g;
429 s#__LE_AWS_ACCESS_KEY_ID__#${LE_AWS_ACCESS_KEY_ID}#g;
430 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
431 s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
432 s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
433 s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
434 s#__RELEASE__#${RELEASE}#g;
435 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
436 s#__VERSION__#${VERSION}#g;
437 s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
438 s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
439 s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
440 s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
441 s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
442 s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
443 s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
444 s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
445 s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
446 s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
447 s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
448 s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
449 s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
450 s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
451 s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
452 s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g;
453 s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
454 s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION}#g;
455 s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g;
456 s#__CONTROLLER_NGINX_WORKERS__#${CONTROLLER_NGINX_WORKERS}#g;
457 s#__CONTROLLER_MAX_CONCURRENT_REQUESTS__#${CONTROLLER_MAX_CONCURRENT_REQUESTS}#g;
458 s#__MONITORING_USERNAME__#${MONITORING_USERNAME}#g;
459 s#__MONITORING_EMAIL__#${MONITORING_EMAIL}#g;
460 s#__MONITORING_PASSWORD__#${MONITORING_PASSWORD}#g" \
461 "${f}" > "${P_DIR}"/$(basename "${f}")
464 if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
465 echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
466 if [ "x${TEST}" = "xyes" ]; then
467 echo "WARNING: Disabling tests for this installation."
472 # Replace cluster and domain name in the test files
473 for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
474 FILTERS="s#__CLUSTER__#${CLUSTER}#g;
475 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
476 s#__DOMAIN__#${DOMAIN}#g;
477 s#__IP_INT__#${IP_INT}#g;
478 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
479 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
480 s#__INITIAL_USER__#${INITIAL_USER}#g;
481 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
482 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
483 if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
484 FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
488 "${f}" > ${T_DIR}/$(basename "${f}")
490 chmod 755 ${T_DIR}/run-test.sh
493 # Replace helper state files that differ from the formula's examples
494 if [ -d "${SOURCE_STATES_DIR}" ]; then
495 mkdir -p "${F_DIR}"/extra/extra
496 rm -f "${F_DIR}"/extra/extra/*
498 for f in $(ls "${SOURCE_STATES_DIR}"/*); do
499 sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
500 s#__CLUSTER__#${CLUSTER}#g;
501 s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
502 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
503 s#__DOMAIN__#${DOMAIN}#g;
504 s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
505 s#__IP_INT__#${IP_INT}#g;
506 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
507 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
508 s#__INITIAL_USER__#${INITIAL_USER}#g;
509 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
510 s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
511 s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
512 s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
513 s#__RELEASE__#${RELEASE}#g;
514 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
515 s#__VERSION__#${VERSION}#g;
516 s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
517 s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
518 s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
519 s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
520 s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
521 s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
522 s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
523 s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
524 s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
525 s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
526 s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
527 s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
528 s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
529 s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
530 s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
531 s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g;
532 s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
533 s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION}#g;
534 s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g;
535 s#__CONTROLLER_NGINX_WORKERS__#${CONTROLLER_NGINX_WORKERS}#g;
536 s#__CONTROLLER_MAX_CONCURRENT_REQUESTS__#${CONTROLLER_MAX_CONCURRENT_REQUESTS}#g;
537 s#__MONITORING_USERNAME__#${MONITORING_USERNAME}#g;
538 s#__MONITORING_EMAIL__#${MONITORING_EMAIL}#g;
539 s#__MONITORING_PASSWORD__#${MONITORING_PASSWORD}#g" \
540 "${f}" > "${F_DIR}/extra/extra"/$(basename "${f}")
544 # Now, we build the SALT states/pillars trees
545 # As we need to separate both states and pillars in case we want specific
546 # roles, we iterate on both at the same time
549 cat > ${S_DIR}/top.sls << EOFTSLS
556 cat > ${P_DIR}/top.sls << EOFPSLS
563 # States, extra states
564 if [ -d "${F_DIR}"/extra/extra ]; then
565 SKIP_SNAKE_OIL="snakeoil_certs"
567 if [[ "$DEV_MODE" = "yes" || "${SSL_MODE}" == "self-signed" ]] ; then
568 # In dev mode, we create some snake oil certs that we'll
569 # use as CUSTOM_CERTS, so we don't skip the states file.
570 # Same when using self-signed certificates.
571 SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
573 for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
574 echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
576 # Use byo or self-signed certificates
577 if [ "${SSL_MODE}" != "lets-encrypt" ]; then
578 mkdir -p "${F_DIR}"/extra/extra/files
582 # If we want specific roles for a node, just add the desired states
583 # and its dependencies
584 if [ -z "${ROLES}" ]; then
586 echo " - nginx.passenger" >> ${S_DIR}/top.sls
587 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
588 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
589 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - extra.aws_credentials" >> ${S_DIR}/top.sls
591 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
593 mkdir -p --mode=0700 /srv/salt/certs
594 if [ "${SSL_MODE}" = "bring-your-own" ]; then
595 # Copy certs to formula extra/files
596 install --mode=0600 ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
597 # We add the custom_certs state
598 grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
599 if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
600 grep -q "ssl_key_encrypted" ${S_DIR}/top.sls || echo " - extra.ssl_key_encrypted" >> ${S_DIR}/top.sls
603 # In self-signed mode, the certificate files will be created and put in the
604 # destination directory by the snakeoil_certs.sls state file
607 echo " - postgres" >> ${S_DIR}/top.sls
608 echo " - logrotate" >> ${S_DIR}/top.sls
609 echo " - docker.software" >> ${S_DIR}/top.sls
610 echo " - arvados" >> ${S_DIR}/top.sls
611 echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
612 echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
613 echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
616 echo " - docker" >> ${P_DIR}/top.sls
617 echo " - nginx_api_configuration" >> ${P_DIR}/top.sls
618 echo " - logrotate_api" >> ${P_DIR}/top.sls
619 echo " - nginx_controller_configuration" >> ${P_DIR}/top.sls
620 echo " - nginx_keepproxy_configuration" >> ${P_DIR}/top.sls
621 echo " - nginx_keepweb_configuration" >> ${P_DIR}/top.sls
622 echo " - nginx_passenger" >> ${P_DIR}/top.sls
623 echo " - nginx_websocket_configuration" >> ${P_DIR}/top.sls
624 echo " - nginx_webshell_configuration" >> ${P_DIR}/top.sls
625 echo " - nginx_workbench2_configuration" >> ${P_DIR}/top.sls
626 echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
627 echo " - logrotate_wb1" >> ${P_DIR}/top.sls
628 echo " - postgresql" >> ${P_DIR}/top.sls
630 # We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
631 NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
632 sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
634 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
635 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
636 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
638 grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
640 hosts=("controller" "websocket" "workbench" "workbench2" "webshell" "keepproxy")
641 if [ ${USE_SINGLE_HOSTNAME} = "no" ]; then
642 hosts+=("download" "collections")
647 for c in "${hosts[@]}"; do
648 # Are we in a single-host-single-hostname env?
649 if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
650 # Are we in a single-host-single-hostname env?
651 CERT_NAME=${HOSTNAME_EXT}
653 # We are in a multiple-hostnames env
654 CERT_NAME=${c}.${CLUSTER}.${DOMAIN}
657 # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
658 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${CERT_NAME}*/g;
659 s#__CERT_PEM__#/etc/letsencrypt/live/${CERT_NAME}/fullchain.pem#g;
660 s#__CERT_KEY__#/etc/letsencrypt/live/${CERT_NAME}/privkey.pem#g" \
661 ${P_DIR}/nginx_${c}_configuration.sls
664 # Use custom certs (either dev mode or prod)
665 grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
666 # And add the certs in the custom_certs pillar
667 echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
668 echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
670 for c in controller websocket workbench workbench2 webshell keepweb keepproxy; do
671 # Are we in a single-host-single-hostname env?
672 if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
673 # Are we in a single-host-single-hostname env?
674 CERT_NAME=${HOSTNAME_EXT}
676 # We are in a multiple-hostnames env
680 if [[ "$SSL_MODE" == "bring-your-own" ]]; then
681 copy_custom_cert ${CUSTOM_CERTS_DIR} ${CERT_NAME}
684 grep -q ${CERT_NAME} ${P_DIR}/extra_custom_certs.sls || echo " - ${CERT_NAME}" >> ${P_DIR}/extra_custom_certs.sls
686 # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
687 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${CERT_NAME}.pem/g;
688 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${CERT_NAME}.pem#g;
689 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${CERT_NAME}.key#g" \
690 ${P_DIR}/nginx_${c}_configuration.sls
694 # If we add individual roles, make sure we add the repo first
695 echo " - arvados.repo" >> ${S_DIR}/top.sls
696 # We add the extra_custom_certs state
697 grep -q "extra.custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
698 if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
699 grep -q "ssl_key_encrypted" ${S_DIR}/top.sls || echo " - extra.ssl_key_encrypted" >> ${S_DIR}/top.sls
702 # And we add the basic part for the certs pillar
703 if [ "${SSL_MODE}" != "lets-encrypt" ]; then
704 # And add the certs in the custom_certs pillar
705 echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
706 echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
707 grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
710 # Prometheus state on all nodes due to the node exporter below
711 grep -q "\- prometheus$" ${S_DIR}/top.sls || echo " - prometheus" >> ${S_DIR}/top.sls
712 # Prometheus node exporter pillar
713 grep -q "prometheus_node_exporter" ${P_DIR}/top.sls || echo " - prometheus_node_exporter" >> ${P_DIR}/top.sls
715 for R in ${ROLES}; do
719 grep -q "\- postgres$" ${S_DIR}/top.sls || echo " - postgres" >> ${S_DIR}/top.sls
720 grep -q "extra.prometheus_pg_exporter" ${S_DIR}/top.sls || echo " - extra.prometheus_pg_exporter" >> ${S_DIR}/top.sls
722 grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
723 grep -q "prometheus_pg_exporter" ${P_DIR}/top.sls || echo " - prometheus_pg_exporter" >> ${P_DIR}/top.sls
726 ### Support files ###
727 GRAFANA_DASHBOARDS_DEST_DIR=/srv/salt/dashboards
728 mkdir -p "${GRAFANA_DASHBOARDS_DEST_DIR}"
729 rm -f "${GRAFANA_DASHBOARDS_DEST_DIR}"/*
730 # "ArvadosPromDataSource" is the hardcoded UID for Prometheus' datasource
732 for f in $(ls "${GRAFANA_DASHBOARDS_DIR}"/*.json); do
733 sed 's#${DS_PROMETHEUS}#ArvadosPromDataSource#g' \
734 "${f}" > "${GRAFANA_DASHBOARDS_DEST_DIR}"/$(basename "${f}")
738 grep -q "\- nginx$" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
739 grep -q "extra.nginx_prometheus_configuration" ${S_DIR}/top.sls || echo " - extra.nginx_prometheus_configuration" >> ${S_DIR}/top.sls
741 grep -q "\- grafana$" ${S_DIR}/top.sls || echo " - grafana" >> ${S_DIR}/top.sls
742 grep -q "extra.grafana_datasource" ${S_DIR}/top.sls || echo " - extra.grafana_datasource" >> ${S_DIR}/top.sls
743 grep -q "extra.grafana_dashboards" ${S_DIR}/top.sls || echo " - extra.grafana_dashboards" >> ${S_DIR}/top.sls
744 grep -q "extra.grafana_admin_user" ${S_DIR}/top.sls || echo " - extra.grafana_admin_user" >> ${S_DIR}/top.sls
746 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
747 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
748 if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
749 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
751 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
752 for SVC in grafana prometheus; do
753 copy_custom_cert ${CUSTOM_CERTS_DIR} ${SVC}
757 grep -q "prometheus_server" ${P_DIR}/top.sls || echo " - prometheus_server" >> ${P_DIR}/top.sls
758 grep -q "grafana" ${P_DIR}/top.sls || echo " - grafana" >> ${P_DIR}/top.sls
759 for SVC in grafana prometheus; do
760 grep -q "nginx_${SVC}_configuration" ${P_DIR}/top.sls || echo " - nginx_${SVC}_configuration" >> ${P_DIR}/top.sls
762 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
763 grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
764 for SVC in grafana prometheus; do
765 grep -q "letsencrypt_${SVC}_configuration" ${P_DIR}/top.sls || echo " - letsencrypt_${SVC}_configuration" >> ${P_DIR}/top.sls
766 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${SVC}.${CLUSTER}.${DOMAIN}*/g;
767 s#__CERT_PEM__#/etc/letsencrypt/live/${SVC}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
768 s#__CERT_KEY__#/etc/letsencrypt/live/${SVC}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
769 ${P_DIR}/nginx_${SVC}_configuration.sls
771 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
772 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
774 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
775 grep -q "ssl_key_encrypted" ${P_DIR}/top.sls || echo " - ssl_key_encrypted" >> ${P_DIR}/top.sls
776 for SVC in grafana prometheus; do
777 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${SVC}.pem/g;
778 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${SVC}.pem#g;
779 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${SVC}.key#g" \
780 ${P_DIR}/nginx_${SVC}_configuration.sls
781 grep -q ${SVC} ${P_DIR}/extra_custom_certs.sls || echo " - ${SVC}" >> ${P_DIR}/extra_custom_certs.sls
787 grep -q " - logrotate" ${S_DIR}/top.sls || echo " - logrotate" >> ${S_DIR}/top.sls
788 if grep -q " - nginx.*$" ${S_DIR}/top.sls; then
789 sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
791 echo " - nginx.passenger" >> ${S_DIR}/top.sls
793 echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
794 ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
795 ### after it. So we add this here as we are, after all, sharing the host for api and controller
796 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
797 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
798 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
800 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
803 if [ "${SSL_MODE}" = "bring-your-own" ]; then
804 copy_custom_cert ${CUSTOM_CERTS_DIR} controller
806 grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
808 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
810 grep -q "logrotate_api" ${P_DIR}/top.sls || echo " - logrotate_api" >> ${P_DIR}/top.sls
811 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
812 grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
813 grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
814 grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
816 # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
817 NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
818 sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
820 "controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
822 if [ "${R}" = "workbench" ]; then
823 grep -q " - logrotate" ${S_DIR}/top.sls || echo " - logrotate" >> ${S_DIR}/top.sls
824 NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
825 if grep -q " - nginx$" ${S_DIR}/top.sls; then
826 sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
828 echo " - nginx.passenger" >> ${S_DIR}/top.sls
831 grep -q "\- nginx$" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
833 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
834 if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
835 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
837 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
839 # Use custom certs, special case for keepweb
840 if [ ${R} = "keepweb" ]; then
841 if [ "${SSL_MODE}" = "bring-your-own" ]; then
842 copy_custom_cert ${CUSTOM_CERTS_DIR} download
843 copy_custom_cert ${CUSTOM_CERTS_DIR} collections
846 if [ "${SSL_MODE}" = "bring-your-own" ]; then
847 copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
851 # webshell role is just a nginx vhost, so it has no state
852 if [ "${R}" != "webshell" ]; then
853 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
856 if [ "${R}" = "workbench" ]; then
857 grep -q "logrotate_wb1" ${P_DIR}/top.sls || echo " - logrotate_wb1" >> ${P_DIR}/top.sls
859 grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
860 grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
861 # Special case for keepweb
862 if [ ${R} = "keepweb" ]; then
863 grep -q "nginx_download_configuration" ${P_DIR}/top.sls || echo " - nginx_download_configuration" >> ${P_DIR}/top.sls
864 grep -q "nginx_collections_configuration" ${P_DIR}/top.sls || echo " - nginx_collections_configuration" >> ${P_DIR}/top.sls
867 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
868 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
869 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
871 grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
872 grep -q "letsencrypt_${R}_configuration" ${P_DIR}/top.sls || echo " - letsencrypt_${R}_configuration" >> ${P_DIR}/top.sls
874 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
875 # Special case for keepweb
876 if [ ${R} = "keepweb" ]; then
877 for kwsub in download collections; do
878 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${kwsub}.${CLUSTER}.${DOMAIN}*/g;
879 s#__CERT_PEM__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
880 s#__CERT_KEY__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
881 ${P_DIR}/nginx_${kwsub}_configuration.sls
884 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${CLUSTER}.${DOMAIN}*/g;
885 s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
886 s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
887 ${P_DIR}/nginx_${R}_configuration.sls
890 grep -q "ssl_key_encrypted" ${P_DIR}/top.sls || echo " - ssl_key_encrypted" >> ${P_DIR}/top.sls
891 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
892 # Special case for keepweb
893 if [ ${R} = "keepweb" ]; then
894 for kwsub in download collections; do
895 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${kwsub}.pem/g;
896 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${kwsub}.pem#g;
897 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${kwsub}.key#g" \
898 ${P_DIR}/nginx_${kwsub}_configuration.sls
899 grep -q ${kwsub} ${P_DIR}/extra_custom_certs.sls || echo " - ${kwsub}" >> ${P_DIR}/extra_custom_certs.sls
902 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${R}.pem/g;
903 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
904 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
905 ${P_DIR}/nginx_${R}_configuration.sls
906 grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
909 # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
910 sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
914 echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
915 echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
916 grep -q "docker" ${S_DIR}/top.sls || echo " - docker.software" >> ${S_DIR}/top.sls
917 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
919 grep -q "docker" ${P_DIR}/top.sls || echo " - docker" >> ${P_DIR}/top.sls
921 "dispatcher" | "keepbalance" | "keepstore")
923 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
925 # ATM, no specific pillar needed
928 echo "Unknown role ${R}"
935 if [ "${DUMP_CONFIG}" = "yes" ]; then
936 # We won't run the rest of the script because we're just dumping the config
940 # Now run the install
941 salt-call --state-output=mixed --local state.apply -l ${LOG_LEVEL}
943 # Finally, make sure that /etc/hosts is not overwritten on reboot
944 if [ -d /etc/cloud/cloud.cfg.d ]; then
945 # TODO: will this work on CentOS?
946 sed -i 's/^manage_etc_hosts: true/#manage_etc_hosts: true/g' /etc/cloud/cloud.cfg.d/*
949 # Leave a copy of the Arvados CA so the user can copy it where it's required
950 if [ "${SSL_MODE}" = "self-signed" ]; then
951 echo "Copying the Arvados CA certificate '${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.crt' to the installer dir, so you can import it"
952 if [ "x${VAGRANT}" = "xyes" ]; then
953 cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
955 cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.crt
959 if [ "x${VAGRANT}" = "xyes" ]; then
960 # If running in a vagrant VM, also add default user to docker group
961 echo "Adding the vagrant user to the docker group"
962 usermod -a -G docker vagrant
965 # Test that the installation finished correctly
966 if [ "x${TEST}" = "xyes" ]; then
968 # If we use RVM, we need to run this with it, or most ruby commands will fail
970 if [ -x /usr/local/rvm/bin/rvm-exec ]; then
971 RVM_EXEC="/usr/local/rvm/bin/rvm-exec"
973 ${RVM_EXEC} ./run-test.sh