2 # Copyright (C) The Arvados Authors. All rights reserved.
4 # SPDX-License-Identifier: AGPL-3.0
6 . `dirname "$(readlink -f "$0")"`/libcloud-pin.sh
9 . `dirname "$(readlink -f "$0")"`/run-library.sh
11 read -rd "\000" helpmessage <<EOF
12 $(basename $0): Install and test Arvados components.
14 Exit non-zero if any tests fail.
17 $(basename $0) WORKSPACE=/path/to/arvados [options]
21 --skip FOO Do not test the FOO component.
22 --skip sanity Skip initial dev environment sanity checks.
23 --skip install Do not run any install steps. Just run tests.
24 You should provide GOPATH, GEMHOME, and VENVDIR options
25 from a previous invocation if you use this option.
26 --only FOO Do not test anything except the FOO component.
27 --temp DIR Install components and dependencies under DIR instead of
28 making a new temporary directory. Implies --leave-temp.
29 --leave-temp Do not remove GOPATH, virtualenv, and other temp dirs at exit.
30 Instead, show the path to give as --temp to reuse them in
31 subsequent invocations.
32 --repeat N Repeat each install/test step until it succeeds N times.
33 --retry Prompt to retry if an install or test suite fails.
34 --only-install Run specific install step
35 --short Skip (or scale down) some slow tests.
36 --interactive Set up, then prompt for test/install steps to perform.
37 WORKSPACE=path Arvados source tree to test.
38 CONFIGSRC=path Dir with api server config files to copy into source tree.
39 (If none given, leave config files alone in source tree.)
40 services/api_test="TEST=test/functional/arvados/v1/collections_controller_test.rb"
41 Restrict apiserver tests to the given file
42 sdk/python_test="--test-suite tests.test_keep_locator"
43 Restrict Python SDK tests to the given class
44 apps/workbench_test="TEST=test/integration/pipeline_instances_test.rb"
45 Restrict Workbench tests to the given file
46 services/arv-git-httpd_test="-check.vv"
47 Show all log messages, even when tests pass (also works
48 with services/keepstore_test etc.)
50 Print more debug messages
51 envvar=value Set \$envvar to value. Primarily useful for WORKSPACE,
52 *_test, and other examples shown above.
54 Assuming "--skip install" is not given, all components are installed
55 into \$GOPATH, \$VENDIR, and \$GEMHOME before running any tests. Many
56 test suites depend on other components being installed, and installing
57 everything tends to be quicker than debugging dependencies.
59 As a special concession to the current CI server config, CONFIGSRC
60 defaults to $HOME/arvados-api-server if that directory exists.
62 More information and background:
64 https://arvados.org/projects/arvados/wiki/Running_tests
69 apps/workbench_units (*)
70 apps/workbench_functionals (*)
71 apps/workbench_integration (*)
72 apps/workbench_benchmark
73 apps/workbench_profile
80 lib/controller/federation
81 lib/controller/railsproxy
89 lib/dispatchcloud/container
90 lib/dispatchcloud/scheduler
91 lib/dispatchcloud/ssh_executor
92 lib/dispatchcloud/worker
95 services/arv-git-httpd
97 services/dockercleaner
104 services/keep-balance
107 services/nodemanager_integration
109 services/crunch-dispatch-local
110 services/crunch-dispatch-slurm
134 tools/crunchstat-summary
135 tools/crunchstat-summary:py3
138 tools/keep-block-check
140 (*) apps/workbench is shorthand for apps/workbench_units +
141 apps/workbench_functionals + apps/workbench_integration
145 # First make sure to remove any ARVADOS_ variables from the calling
146 # environment that could interfere with the tests.
147 unset $(env | cut -d= -f1 | grep \^ARVADOS_)
149 # Reset other variables that could affect our [tests'] behavior by
159 export LANG=en_US.UTF-8
167 if [[ -z "$temp" ]]; then
168 # we didn't even get as far as making a temp dir
170 elif [[ -z "$temp_preserve" ]]; then
173 echo "Leaving behind temp dirs in $temp"
179 echo >&2 "Fatal: $* (encountered in ${FUNCNAME[1]} at ${BASH_SOURCE[1]} line ${BASH_LINENO[0]})"
185 if which create-plot-data-from-log.sh >/dev/null; then
186 create-plot-data-from-log.sh $BUILD_NUMBER "$WORKSPACE/apps/workbench/log/test.log" "$WORKSPACE/apps/workbench/log/"
188 rotate_logfile "$WORKSPACE/apps/workbench/log/" "test.log"
190 rotate_logfile "$WORKSPACE/services/api/log/" "test.log"
197 [[ -n "${skip[sanity]}" ]] && return 0
198 ( [[ -n "$WORKSPACE" ]] && [[ -d "$WORKSPACE/services" ]] ) \
199 || fatal "WORKSPACE environment variable not set to a source directory (see: $0 --help)"
200 echo Checking dependencies:
201 echo "locale: ${LANG}"
202 [[ "$(locale charmap)" = "UTF-8" ]] \
203 || fatal "Locale '${LANG}' is broken/missing. Try: echo ${LANG} | sudo tee -a /etc/locale.gen && sudo locale-gen"
204 echo -n 'virtualenv: '
205 virtualenv --version \
206 || fatal "No virtualenv. Try: apt-get install virtualenv (on ubuntu: python-virtualenv)"
209 || fatal "No ruby. Install >=2.1.9 (using rbenv, rvm, or source)"
212 || fatal "No go binary. See http://golang.org/doc/install"
213 [[ $(go version) =~ go1.([0-9]+) ]] && [[ ${BASH_REMATCH[1]} -ge 12 ]] \
214 || fatal "Go >= 1.12 required. See http://golang.org/doc/install"
216 gcc --version | egrep ^gcc \
217 || fatal "No gcc. Try: apt-get install build-essential"
219 find /usr/include -path '*fuse/fuse.h' | egrep --max-count=1 . \
220 || fatal "No fuse/fuse.h. Try: apt-get install libfuse-dev"
222 find /usr/include -path '*gnutls/gnutls.h' | egrep --max-count=1 . \
223 || fatal "No gnutls/gnutls.h. Try: apt-get install libgnutls28-dev"
224 echo -n 'Python2 pyconfig.h: '
225 find /usr/include -path '*/python2*/pyconfig.h' | egrep --max-count=1 . \
226 || fatal "No Python2 pyconfig.h. Try: apt-get install python2.7-dev"
227 echo -n 'Python3 pyconfig.h: '
228 find /usr/include -path '*/python3*/pyconfig.h' | egrep --max-count=1 . \
229 || fatal "No Python3 pyconfig.h. Try: apt-get install python3-dev"
231 || fatal "No netstat. Try: apt-get install net-tools"
233 PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin" nginx -v \
234 || fatal "No nginx. Try: apt-get install nginx"
236 perl -v | grep version \
237 || fatal "No perl. Try: apt-get install perl"
238 for mod in ExtUtils::MakeMaker JSON LWP Net::SSL; do
239 echo -n "perl $mod: "
240 perl -e "use $mod; print \"\$$mod::VERSION\\n\"" \
241 || fatal "No $mod. Try: apt-get install perl-modules libcrypt-ssleay-perl libjson-perl libwww-perl"
245 || fatal "No gitolite. Try: apt-get install gitolite3"
248 || fatal "No npm. Try: wget -O- https://nodejs.org/dist/v6.11.2/node-v6.11.2-linux-x64.tar.xz | sudo tar -C /usr/local -xJf - && sudo ln -s ../node-v6.11.2-linux-x64/bin/{node,npm} /usr/local/bin/"
250 cadaver --version | grep -w cadaver \
251 || fatal "No cadaver. Try: apt-get install cadaver"
252 echo -n 'libattr1 xattr.h: '
253 find /usr/include -path '*/attr/xattr.h' | egrep --max-count=1 . \
254 || fatal "No libattr1 xattr.h. Try: apt-get install libattr1-dev"
255 echo -n 'libcurl curl.h: '
256 find /usr/include -path '*/curl/curl.h' | egrep --max-count=1 . \
257 || fatal "No libcurl curl.h. Try: apt-get install libcurl4-gnutls-dev"
258 echo -n 'libpq libpq-fe.h: '
259 find /usr/include -path '*/postgresql/libpq-fe.h' | egrep --max-count=1 . \
260 || fatal "No libpq libpq-fe.h. Try: apt-get install libpq-dev"
261 echo -n 'postgresql: '
262 psql --version || fatal "No postgresql. Try: apt-get install postgresql postgresql-client-common"
263 echo -n 'phantomjs: '
264 phantomjs --version || fatal "No phantomjs. Try: apt-get install phantomjs"
266 which Xvfb || fatal "No xvfb. Try: apt-get install xvfb"
268 dot -V || fatal "No graphviz. Try: apt-get install graphviz"
269 echo -n 'geckodriver: '
270 geckodriver --version | grep ^geckodriver || echo "No geckodriver. Try: wget -O- https://github.com/mozilla/geckodriver/releases/download/v0.23.0/geckodriver-v0.23.0-linux64.tar.gz | sudo tar -C /usr/local/bin -xzf - geckodriver"
272 if [[ "$NEED_SDK_R" = true ]]; then
275 which Rscript || fatal "No Rscript. Try: apt-get install r-base"
277 Rscript -e "library('testthat')" || fatal "No testthat. Try: apt-get install r-cran-testthat"
278 # needed for roxygen2, needed for devtools, needed for R sdk
279 pkg-config --exists libxml-2.0 || fatal "No libxml2. Try: apt-get install libxml2-dev"
280 # needed for pkgdown, builds R SDK doc pages
281 which pandoc || fatal "No pandoc. Try: apt-get install pandoc"
286 # i.e. rotate_logfile "$WORKSPACE/apps/workbench/log/" "test.log"
287 # $BUILD_NUMBER is set by Jenkins if this script is being called as part of a Jenkins run
288 if [[ -f "$1/$2" ]]; then
289 THEDATE=`date +%Y%m%d%H%M%S`
290 mv "$1/$2" "$1/$THEDATE-$BUILD_NUMBER-$2"
291 gzip "$1/$THEDATE-$BUILD_NUMBER-$2"
299 skip[apps/workbench_profile]=1
300 # nodemanager_integration tests are not reliable, see #12061.
301 skip[services/nodemanager_integration]=1
308 echo >&2 "$helpmessage"
316 only[$1]=1; skip[$1]=""; shift
328 only_install="$1"; shift
338 repeat=$((${1}+0)); shift
344 suite="${arg%%_test=*}"
346 testargs["$suite"]="$args"
349 eval export $(echo $arg | cut -d= -f1)=\"$(echo $arg | cut -d= -f2-)\"
352 echo >&2 "$0: Unrecognized option: '$arg'. Try: $0 --help"
358 # R SDK installation is very slow (~360s in a clean environment) and only
359 # required when testing it. Skip that step if it is not needed.
362 if [[ ${#only[@]} -ne 0 ]] &&
363 [[ -z "${only['sdk/R']}" && -z "${only['doc']}" ]]; then
367 if [[ ${skip["sdk/R"]} == 1 && ${skip["doc"]} == 1 ]]; then
371 if [[ $NEED_SDK_R == false ]]; then
372 echo "R SDK not needed, it will not be installed."
377 pid="$(cat "$WORKSPACE/tmp/${svc}.pid")"
378 if [[ -z "$pid" ]] || ! kill -0 "$pid"; then
379 tail $WORKSPACE/tmp/${1}*.log
380 echo "${svc} pid ${pid} not running"
383 echo "${svc} pid ${pid} ok"
388 base=$(python -c "import yaml; print list(yaml.safe_load(file('$ARVADOS_CONFIG'))['Clusters']['zzzzz']['Services']['$1']['InternalURLs'].keys())[0]")
389 url="$base/_health/ping"
390 if ! curl -Ss -H "Authorization: Bearer e687950a23c3a9bceec28c6223a06c79" "${url}" | tee -a /dev/stderr | grep '"OK"'; then
396 checkdiscoverydoc() {
397 dd="https://${1}/discovery/v1/apis/arvados/v1/rest"
398 if ! (set -o pipefail; curl -fsk "$dd" | grep -q ^{ ); then
399 echo >&2 "ERROR: could not retrieve discovery doc from RailsAPI at $dd"
400 tail -v $WORKSPACE/services/api/log/test.log
407 if [[ -n "$ARVADOS_TEST_API_HOST" ]]; then
410 . "$VENVDIR/bin/activate"
411 echo 'Starting API, controller, keepproxy, keep-web, arv-git-httpd, ws, and nginx ssl proxy...'
412 if [[ ! -d "$WORKSPACE/services/api/log" ]]; then
413 mkdir -p "$WORKSPACE/services/api/log"
415 # Remove empty api.pid file if it exists
416 if [[ -f "$WORKSPACE/tmp/api.pid" && ! -s "$WORKSPACE/tmp/api.pid" ]]; then
417 rm -f "$WORKSPACE/tmp/api.pid"
419 all_services_stopped=
421 eval $(python sdk/python/tests/run_test_server.py setup_config)
423 && eval $(python sdk/python/tests/run_test_server.py start --auth admin) \
424 && export ARVADOS_TEST_API_HOST="$ARVADOS_API_HOST" \
425 && export ARVADOS_TEST_API_INSTALLED="$$" \
426 && checkpidfile api \
427 && checkdiscoverydoc $ARVADOS_API_HOST \
428 && eval $(python sdk/python/tests/run_test_server.py start_nginx) \
429 && checkpidfile nginx \
430 && python sdk/python/tests/run_test_server.py start_controller \
431 && checkpidfile controller \
432 && checkhealth Controller \
433 && checkdiscoverydoc $ARVADOS_API_HOST \
434 && python sdk/python/tests/run_test_server.py start_keep_proxy \
435 && checkpidfile keepproxy \
436 && python sdk/python/tests/run_test_server.py start_keep-web \
437 && checkpidfile keep-web \
438 && checkhealth WebDAV \
439 && python sdk/python/tests/run_test_server.py start_arv-git-httpd \
440 && checkpidfile arv-git-httpd \
441 && checkhealth GitHTTP \
442 && python sdk/python/tests/run_test_server.py start_ws \
444 && export ARVADOS_TEST_PROXY_SERVICES=1 \
445 && (env | egrep ^ARVADOS) \
448 if [[ $fail != 0 ]]; then
449 unset ARVADOS_TEST_API_HOST
455 if [[ -n "$all_services_stopped" ]]; then
458 unset ARVADOS_TEST_API_HOST ARVADOS_TEST_PROXY_SERVICES
459 . "$VENVDIR/bin/activate" || return
461 && python sdk/python/tests/run_test_server.py stop_nginx \
462 && python sdk/python/tests/run_test_server.py stop_arv-git-httpd \
463 && python sdk/python/tests/run_test_server.py stop_ws \
464 && python sdk/python/tests/run_test_server.py stop_keep-web \
465 && python sdk/python/tests/run_test_server.py stop_keep_proxy \
466 && python sdk/python/tests/run_test_server.py stop_controller \
467 && python sdk/python/tests/run_test_server.py stop \
468 && all_services_stopped=1
473 failures+=("($(basename $0) interrupted)")
478 setup_ruby_environment() {
479 if [[ -s "$HOME/.rvm/scripts/rvm" ]] ; then
480 source "$HOME/.rvm/scripts/rvm"
482 elif [[ -s "/usr/local/rvm/scripts/rvm" ]] ; then
483 source "/usr/local/rvm/scripts/rvm"
489 if [[ "$using_rvm" == true ]]; then
490 # If rvm is in use, we can't just put separate "dependencies"
491 # and "gems-under-test" paths to GEM_PATH: passenger resets
492 # the environment to the "current gemset", which would lose
493 # our GEM_PATH and prevent our test suites from running ruby
494 # programs (for example, the Workbench test suite could not
495 # boot an API server or run arv). Instead, we have to make an
496 # rvm gemset and use it for everything.
498 [[ `type rvm | head -n1` == "rvm is a function" ]] \
501 # Put rvm's favorite path back in first place (overriding
502 # virtualenv, which just put itself there). Ignore rvm's
503 # complaint about not being in first place already.
504 rvm use @default 2>/dev/null
506 # Create (if needed) and switch to an @arvados-tests-* gemset,
507 # salting the gemset name so it doesn't interfere with
508 # concurrent builds in other workspaces. Leave the choice of
509 # ruby to the caller.
510 gemset="arvados-tests-$(echo -n "${WORKSPACE}" | md5sum | head -c16)"
511 rvm use "@${gemset}" --create \
512 || fatal 'rvm gemset setup'
516 # When our "bundle install"s need to install new gems to
517 # satisfy dependencies, we want them to go where "gem install
518 # --user-install" would put them. (However, if the caller has
519 # already set GEM_HOME, we assume that's where dependencies
520 # should be installed, and we should leave it alone.)
522 if [ -z "$GEM_HOME" ]; then
523 user_gempath="$(gem env gempath)"
524 export GEM_HOME="${user_gempath%%:*}"
526 PATH="$(gem env gemdir)/bin:$PATH"
528 # When we build and install our own gems, we install them in our
529 # $GEMHOME tmpdir, and we want them to be at the front of GEM_PATH and
530 # PATH so integration tests prefer them over other versions that
531 # happen to be installed in $user_gempath, system dirs, etc.
533 tmpdir_gem_home="$(env - PATH="$PATH" HOME="$GEMHOME" gem env gempath | cut -f1 -d:)"
534 PATH="$tmpdir_gem_home/bin:$PATH"
535 export GEM_PATH="$tmpdir_gem_home"
537 echo "Will install dependencies to $(gem env gemdir)"
538 echo "Will install arvados gems to $tmpdir_gem_home"
539 echo "Gem search path is GEM_PATH=$GEM_PATH"
541 bundle config || gem install bundler \
542 || fatal 'install bundler'
546 if [[ "$using_rvm" == true ]]; then
549 GEM_HOME="$tmpdir_gem_home" GEM_PATH="$tmpdir_gem_home" "$@"
553 gem_uninstall_if_exists() {
554 if gem list "$1\$" | egrep '^\w'; then
555 gem uninstall --force --all --executables "$1"
560 local venvdest="$1"; shift
561 if ! [[ -e "$venvdest/bin/activate" ]] || ! [[ -e "$venvdest/bin/pip" ]]; then
562 virtualenv --setuptools "$@" "$venvdest" || fatal "virtualenv $venvdest failed"
563 elif [[ -n "$short" ]]; then
566 if [[ $("$venvdest/bin/python" --version 2>&1) =~ \ 3\.[012]\. ]]; then
567 # pip 8.0.0 dropped support for python 3.2, e.g., debian wheezy
568 "$venvdest/bin/pip" install --no-cache-dir 'setuptools>=18.5' 'pip>=7,<8'
570 "$venvdest/bin/pip" install --no-cache-dir 'setuptools>=18.5' 'pip>=7'
577 echo "WORKSPACE=$WORKSPACE"
579 if [[ -z "$CONFIGSRC" ]] && [[ -d "$HOME/arvados-api-server" ]]; then
580 # Jenkins expects us to use this by default.
581 CONFIGSRC="$HOME/arvados-api-server"
584 # Clean up .pyc files that may exist in the workspace
586 find -name '*.pyc' -delete
588 if [[ -z "$temp" ]]; then
592 # Set up temporary install dirs (unless existing dirs were supplied)
593 for tmpdir in VENVDIR VENV3DIR GOPATH GEMHOME PERLINSTALLBASE R_LIBS
595 if [[ -z "${!tmpdir}" ]]; then
596 eval "$tmpdir"="$temp/$tmpdir"
598 if ! [[ -d "${!tmpdir}" ]]; then
599 mkdir "${!tmpdir}" || fatal "can't create ${!tmpdir} (does $temp exist?)"
603 rm -vf "${WORKSPACE}/tmp/*.log"
605 export PERLINSTALLBASE
606 export PERL5LIB="$PERLINSTALLBASE/lib/perl5${PERL5LIB:+:$PERL5LIB}"
611 # Make sure our compiled binaries under test override anything
612 # else that might be in the environment.
613 export PATH=$GOPATH/bin:$PATH
615 # Jenkins config requires that glob tmp/*.log match something. Ensure
616 # that happens even if we don't end up running services that set up
618 mkdir -p "${WORKSPACE}/tmp/" || fatal "could not mkdir ${WORKSPACE}/tmp"
619 touch "${WORKSPACE}/tmp/controller.log" || fatal "could not touch ${WORKSPACE}/tmp/controller.log"
621 unset http_proxy https_proxy no_proxy
623 # Note: this must be the last time we change PATH, otherwise rvm will
625 setup_ruby_environment
633 mkdir -p "$GOPATH/src/git.curoverse.com"
634 if [[ ! -h "$GOPATH/src/git.curoverse.com/arvados.git" ]]; then
636 "$GOPATH/src/git.curoverse.com/arvados.git/tmp/GOPATH" \
637 "$GOPATH/src/git.curoverse.com/arvados.git/tmp" \
638 "$GOPATH/src/git.curoverse.com/arvados.git"; do
639 [[ -d "$d" ]] && rmdir "$d"
643 "$GOPATH/src/git.curoverse.com/arvados.git/arvados" \
644 "$GOPATH/src/git.curoverse.com/arvados.git"; do
645 [[ -h "$d" ]] && rm "$d"
647 ln -vsfT "$WORKSPACE" "$GOPATH/src/git.curoverse.com/arvados.git"
648 go get -v github.com/kardianos/govendor
649 cd "$GOPATH/src/git.curoverse.com/arvados.git"
651 "$GOPATH/bin/govendor" sync
652 which goimports >/dev/null || go get golang.org/x/tools/cmd/goimports
653 ) || fatal "Go setup failed"
655 setup_virtualenv "$VENVDIR" --python python2.7
656 . "$VENVDIR/bin/activate"
658 # Needed for run_test_server.py which is used by certain (non-Python) tests.
659 pip install --no-cache-dir PyYAML \
660 || fatal "pip install PyYAML failed"
662 # Preinstall libcloud if using a fork; otherwise nodemanager "pip
663 # install" won't pick it up by default.
664 if [[ -n "$LIBCLOUD_PIN_SRC" ]]; then
665 pip freeze 2>/dev/null | egrep ^apache-libcloud==$LIBCLOUD_PIN \
666 || pip install --pre --ignore-installed --no-cache-dir "$LIBCLOUD_PIN_SRC" >/dev/null \
667 || fatal "pip install apache-libcloud failed"
670 # Deactivate Python 2 virtualenv
673 # If Python 3 is available, set up its virtualenv in $VENV3DIR.
674 # Otherwise, skip dependent tests.
675 PYTHON3=$(which python3)
676 if [[ ${?} = 0 ]]; then
677 setup_virtualenv "$VENV3DIR" --python python3
682 Warning: python3 could not be found. Python 3 tests will be skipped.
687 if ! which bundler >/dev/null
689 gem install --user-install bundler || fatal 'Could not install bundler'
698 if [[ "$remain" -gt 1 ]]; then
699 remain=$((${remain}-1))
700 title "(repeating ${remain} more times)"
704 elif [[ "$retry" == 1 ]]; then
705 read -p 'Try again? [Y/n] ' x
706 if [[ "$x" != "y" ]] && [[ "$x" != "" ]]
718 apps/workbench_units | apps/workbench_functionals | apps/workbench_integration)
721 services/nodemanager | services/nodemanager_integration)
722 suite=services/nodemanager_suite
728 if [[ -n "${skip[$suite]}" || \
729 -n "${skip[$1]}" || \
730 (${#only[@]} -ne 0 && ${only[$suite]} -eq 0 && ${only[$1]} -eq 0) ]]; then
737 gofmt | govendor | doc | lib/cli | lib/cloud/azure | lib/cloud/ec2 | lib/cloud/cloudtest | lib/cmd | lib/dispatchcloud/ssh_executor | lib/dispatchcloud/worker)
738 # don't care whether services are running
741 if ! start_services; then
742 title "test $1 -- failed to start services"
747 retry do_test_once ${@}
757 if which deactivate >/dev/null; then deactivate; fi
758 if ! . "$VENVDIR/bin/activate"
761 elif [[ "$2" == "go" ]]
763 covername="coverage-$(echo "$1" | sed -e 's/\//_/g')"
764 coverflags=("-covermode=count" "-coverprofile=$WORKSPACE/tmp/.$covername.tmp")
765 # We do "go get -t" here to catch compilation errors
766 # before trying "go test". Otherwise, coverage-reporting
767 # mode makes Go show the wrong line numbers when reporting
768 # compilation errors.
769 go get -ldflags "-X git.curoverse.com/arvados.git/lib/cmd.version=${ARVADOS_VERSION:-$(git log -n1 --format=%H)-dev}" -t "git.curoverse.com/arvados.git/$1" && \
770 cd "$GOPATH/src/git.curoverse.com/arvados.git/$1" && \
771 if [[ -n "${testargs[$1]}" ]]
773 # "go test -check.vv giturl" doesn't work, but this
775 go test ${short:+-short} ${testargs[$1]}
777 # The above form gets verbose even when testargs is
778 # empty, so use this form in such cases:
779 go test ${short:+-short} ${coverflags[@]} "git.curoverse.com/arvados.git/$1"
782 if [[ -f "$WORKSPACE/tmp/.$covername.tmp" ]]
784 go tool cover -html="$WORKSPACE/tmp/.$covername.tmp" -o "$WORKSPACE/tmp/$covername.html"
785 rm "$WORKSPACE/tmp/.$covername.tmp"
787 [[ $result = 0 ]] && gofmt -e -d *.go
788 elif [[ "$2" == "pip" ]]
791 cd "$WORKSPACE/$1" && while :
793 tries=$((${tries}+1))
794 # $3 can name a path directory for us to use, including trailing
795 # slash; e.g., the bin/ subdirectory of a virtualenv.
796 if [[ -e "${3}activate" ]]; then
799 python setup.py ${short:+--short-tests-only} test ${testargs[$1]}
801 if [[ ${tries} < 3 && ${result} == 137 ]]
803 printf '\n*****\n%s tests killed -- retrying\n*****\n\n' "$1"
809 elif [[ "$2" != "" ]]
816 checkexit $result "$1 tests"
817 title "test $1 -- `timer`"
822 if [[ -n "${skip[install]}" || ( -n "${only_install}" && "${only_install}" != "${1}" && "${only_install}" != "${2}" ) ]]; then
825 retry do_install_once ${@}
833 if which deactivate >/dev/null; then deactivate; fi
834 if [[ "$1" != "env" ]] && ! . "$VENVDIR/bin/activate"; then
836 elif [[ "$2" == "go" ]]
838 go get -ldflags "-X git.curoverse.com/arvados.git/lib/cmd.version=${ARVADOS_VERSION:-$(git log -n1 --format=%H)-dev}" -t "git.curoverse.com/arvados.git/$1"
839 elif [[ "$2" == "pip" ]]
841 # $3 can name a path directory for us to use, including trailing
842 # slash; e.g., the bin/ subdirectory of a virtualenv.
844 # Need to change to a different directory after creating
845 # the source dist package to avoid a pip bug.
846 # see https://arvados.org/issues/5766 for details.
848 # Also need to install twice, because if it believes the package is
849 # already installed, pip it won't install it. So the first "pip
850 # install" ensures that the dependencies are met, the second "pip
851 # install" ensures that we've actually installed the local package
854 && "${3}python" setup.py sdist rotate --keep=1 --match .tar.gz \
856 && "${3}pip" install --no-cache-dir --quiet "$WORKSPACE/$1/dist"/*.tar.gz \
857 && "${3}pip" install --no-cache-dir --quiet --no-deps --ignore-installed "$WORKSPACE/$1/dist"/*.tar.gz
858 elif [[ "$2" != "" ]]
865 checkexit $result "$1 install"
866 title "install $1 -- `timer`"
870 bundle_install_trylocal() {
873 echo "(Running bundle install --local. 'could not find package' messages are OK.)"
874 if ! bundle install --local --no-deployment; then
875 echo "(Running bundle install again, without --local.)"
876 bundle install --no-deployment
883 cd "$WORKSPACE/doc" \
884 && bundle_install_trylocal \
891 with_test_gemset gem_uninstall_if_exists "$gemname" \
892 && cd "$WORKSPACE/$srcpath" \
893 && bundle_install_trylocal \
894 && gem build "$gemname.gemspec" \
895 && with_test_gemset gem install --no-document $(ls -t "$gemname"-*.gem|head -n1)
899 install_gem arvados sdk/ruby
903 if [[ "$NEED_SDK_R" = true ]]; then
904 cd "$WORKSPACE/sdk/R" \
905 && Rscript --vanilla install_deps.R
910 cd "$WORKSPACE/sdk/perl" \
911 && perl Makefile.PL INSTALL_BASE="$PERLINSTALLBASE" \
912 && make install INSTALLDIRS=perl
916 install_gem arvados-cli sdk/cli
919 install_services/login-sync() {
920 install_gem arvados-login-sync services/login-sync
923 install_services/api() {
925 cd "$WORKSPACE/services/api" \
926 && RAILS_ENV=test bundle_install_trylocal
928 rm -f config/environments/test.rb
929 cp config/environments/test.rb.example config/environments/test.rb
931 # Clear out any lingering postgresql connections to the test
932 # database, so that we can drop it. This assumes the current user
933 # is a postgresql superuser.
934 cd "$WORKSPACE/services/api" \
935 && test_database=$(python -c "import yaml; print yaml.safe_load(file('$ARVADOS_CONFIG'))['Clusters']['zzzzz']['PostgreSQL']['Connection']['dbname']") \
936 && psql "$test_database" -c "SELECT pg_terminate_backend (pg_stat_activity.pid::int) FROM pg_stat_activity WHERE pg_stat_activity.datname = '$test_database';" 2>/dev/null
938 mkdir -p "$WORKSPACE/services/api/tmp/pids"
940 cert="$WORKSPACE/services/api/tmp/self-signed"
941 if [[ ! -e "$cert.pem" || "$(date -r "$cert.pem" +%s)" -lt 1512659226 ]]; then
943 dir="$WORKSPACE/services/api/tmp"
945 openssl req -newkey rsa:2048 -nodes -subj '/C=US/ST=State/L=City/CN=localhost' -out "$cert.csr" -keyout "$cert.key" </dev/null
946 openssl x509 -req -in "$cert.csr" -signkey "$cert.key" -out "$cert.pem" -days 3650 -extfile <(printf 'subjectAltName=DNS:localhost,DNS:::1,DNS:0.0.0.0,DNS:127.0.0.1,IP:::1,IP:0.0.0.0,IP:127.0.0.1')
950 cd "$WORKSPACE/services/api" \
952 && mkdir -p tmp/git \
954 && tar xf ../../test/test.git.tar \
955 && mkdir -p internal.git \
956 && git --git-dir internal.git init \
959 cd "$WORKSPACE/services/api" \
960 && RAILS_ENV=test bundle exec rails db:environment:set \
961 && RAILS_ENV=test bundle exec rake db:drop \
962 && RAILS_ENV=test bundle exec rake db:setup \
963 && RAILS_ENV=test bundle exec rake db:fixtures:load
966 declare -a pythonstuff
973 services/dockercleaner:py3
977 tools/crunchstat-summary
978 tools/crunchstat-summary:py3
982 gostuff=($(cd "$WORKSPACE" && git grep -lw func | grep \\.go | sed -e 's/\/[^\/]*$//' | sort -u))
984 install_apps/workbench() {
985 cd "$WORKSPACE/apps/workbench" \
986 && mkdir -p tmp/cache \
987 && RAILS_ENV=test bundle_install_trylocal \
988 && RAILS_ENV=test RAILS_GROUPS=assets bundle exec rake npm:install
995 ARVADOS_API_HOST=qr1hi.arvadosapi.com
996 # Make sure python-epydoc is installed or the next line won't
998 PYTHONPATH=$WORKSPACE/sdk/python/ bundle exec rake linkchecker baseurl=file://$WORKSPACE/doc/.site/ arvados_workbench_host=https://workbench.$ARVADOS_API_HOST arvados_api_host=$ARVADOS_API_HOST
1003 cd "$WORKSPACE" || return 1
1004 dirs=$(ls -d */ | egrep -v 'vendor|tmp')
1005 [[ -z "$(gofmt -e -d $dirs | tee -a /dev/stderr)" ]]
1011 cd "$GOPATH/src/git.curoverse.com/arvados.git"
1012 # Remove cached source dirs in workdir. Otherwise, they will
1013 # not qualify as +missing or +external below, and we won't be
1014 # able to detect that they're missing from vendor/vendor.json.
1017 "$GOPATH/bin/govendor" sync
1018 if [[ -n $("$GOPATH/bin/govendor" list +unused +missing +external | tee /dev/stderr) ]]; then
1019 echo >&2 "vendor/vendor.json has unused or missing dependencies -- try:
1021 (export GOPATH=\"${GOPATH}\"; cd \$GOPATH/src/git.curoverse.com/arvados.git && \$GOPATH/bin/govendor add +missing +external && \$GOPATH/bin/govendor remove +unused)
1029 test_services/api() {
1030 rm -f "$WORKSPACE/services/api/git-commit.version"
1031 cd "$WORKSPACE/services/api" \
1032 && env RAILS_ENV=test ${short:+RAILS_TEST_SHORT=1} bundle exec rake test TESTOPTS='-v -d' ${testargs[services/api]}
1036 cd "$WORKSPACE/sdk/ruby" \
1037 && bundle exec rake test TESTOPTS=-v ${testargs[sdk/ruby]}
1041 if [[ "$NEED_SDK_R" = true ]]; then
1042 cd "$WORKSPACE/sdk/R" \
1043 && Rscript --vanilla run_test.R
1048 cd "$WORKSPACE/sdk/cli" \
1049 && mkdir -p /tmp/keep \
1050 && KEEP_LOCAL_STORE=/tmp/keep bundle exec rake test TESTOPTS=-v ${testargs[sdk/cli]}
1053 test_sdk/java-v2() {
1054 cd "$WORKSPACE/sdk/java-v2" && gradle test
1057 test_services/login-sync() {
1058 cd "$WORKSPACE/services/login-sync" \
1059 && bundle exec rake test TESTOPTS=-v ${testargs[services/login-sync]}
1062 test_services/nodemanager_integration() {
1063 cd "$WORKSPACE/services/nodemanager" \
1064 && tests/integration_test.py ${testargs[services/nodemanager_integration]}
1067 test_apps/workbench_units() {
1068 local TASK="test:units"
1069 if [[ -n "${testargs[apps/workbench]}" ]] || [[ -n "${testargs[apps/workbench_units]}" ]]; then
1072 cd "$WORKSPACE/apps/workbench" \
1073 && env RAILS_ENV=test ${short:+RAILS_TEST_SHORT=1} bundle exec rake ${TASK} TESTOPTS='-v -d' ${testargs[apps/workbench]} ${testargs[apps/workbench_units]}
1076 test_apps/workbench_functionals() {
1077 local TASK="test:functionals"
1078 if [[ -n "${testargs[apps/workbench]}" ]] || [[ -n "${testargs[apps/workbench_functionals]}" ]]; then
1081 cd "$WORKSPACE/apps/workbench" \
1082 && env RAILS_ENV=test ${short:+RAILS_TEST_SHORT=1} bundle exec rake ${TASK} TESTOPTS='-v -d' ${testargs[apps/workbench]} ${testargs[apps/workbench_functionals]}
1085 test_apps/workbench_integration() {
1086 local TASK="test:integration"
1087 if [[ -n "${testargs[apps/workbench]}" ]] || [[ -n "${testargs[apps/workbench_integration]}" ]]; then
1090 cd "$WORKSPACE/apps/workbench" \
1091 && env RAILS_ENV=test ${short:+RAILS_TEST_SHORT=1} bundle exec rake ${TASK} TESTOPTS='-v -d' ${testargs[apps/workbench]} ${testargs[apps/workbench_integration]}
1094 test_apps/workbench_benchmark() {
1095 local TASK="test:benchmark"
1096 if [[ -n "${testargs[apps/workbench]}" ]] || [[ -n "${testargs[apps/workbench_benchmark]}" ]]; then
1099 cd "$WORKSPACE/apps/workbench" \
1100 && env RAILS_ENV=test ${short:+RAILS_TEST_SHORT=1} bundle exec rake ${TASK} ${testargs[apps/workbench_benchmark]}
1103 test_apps/workbench_profile() {
1104 local TASK="test:profile"
1105 if [[ -n "${testargs[apps/workbench]}" ]] || [[ -n "${testargs[apps/workbench_profile]}" ]]; then
1108 cd "$WORKSPACE/apps/workbench" \
1109 && env RAILS_ENV=test ${short:+RAILS_TEST_SHORT=1} bundle exec rake ${TASK} ${testargs[apps/workbench_profile]}
1113 # Install parts needed by test suites
1115 do_install cmd/arvados-server go
1118 do_install sdk/python pip
1120 do_install services/api
1121 do_install services/arv-git-httpd go
1122 do_install services/keepproxy go
1123 do_install services/keepstore go
1124 do_install services/keep-web go
1125 do_install services/ws go
1135 do_install services/login-sync
1136 for p in "${pythonstuff[@]}"
1139 if [[ ${dir} = ${p} ]]; then
1140 if [[ -z ${skip[python2]} ]]; then
1141 do_install ${dir} pip
1143 elif [[ -n ${PYTHON3} ]]; then
1144 if [[ -z ${skip[python3]} ]]; then
1145 do_install ${dir} pip "$VENV3DIR/bin/"
1149 for g in "${gostuff[@]}"
1153 do_install services/api
1154 do_install apps/workbench
1159 do_test services/api
1161 # Shortcut for when we're only running apiserver tests. This saves a bit of time,
1162 # because we don't need to start up the api server for subsequent tests.
1163 if [ ! -z "$only" ] && [ "$only" == "services/api" ]; then
1164 rotate_logfile "$WORKSPACE/services/api/log/" "test.log"
1174 do_test services/login-sync
1176 do_test services/nodemanager_integration
1177 for p in "${pythonstuff[@]}"
1180 if [[ ${dir} = ${p} ]]; then
1181 if [[ -z ${skip[python2]} ]]; then
1184 elif [[ -n ${PYTHON3} ]]; then
1185 if [[ -z ${skip[python3]} ]]; then
1186 do_test ${dir} pip "$VENV3DIR/bin/"
1191 for g in "${gostuff[@]}"
1195 do_test apps/workbench_units
1196 do_test apps/workbench_functionals
1197 do_test apps/workbench_integration
1198 do_test apps/workbench_benchmark
1199 do_test apps/workbench_profile
1202 help_interactive() {
1203 echo "== Interactive commands:"
1204 echo "TARGET (short for 'test DIR')"
1206 echo "test TARGET:py3 (test with python3)"
1207 echo "test TARGET -check.vv (pass arguments to test)"
1208 echo "install TARGET"
1209 echo "install env (go/python libs)"
1210 echo "install deps (go/python libs + arvados components needed for integration tests)"
1211 echo "reset (...services used by integration tests)"
1213 echo "== Test targets:"
1214 echo "${!testfuncargs[@]}" | tr ' ' '\n' | sort | column
1219 declare -A testfuncargs=()
1220 for g in "${gostuff[@]}"; do
1221 testfuncargs[$g]="$g go"
1223 for p in "${pythonstuff[@]}"; do
1225 testfuncargs[$dir]="$dir pip $VENVDIR/bin/"
1226 testfuncargs[$dir:py3]="$dir pip $VENV3DIR/bin/"
1229 testfuncargs["sdk/cli"]="sdk/cli"
1230 testfuncargs["sdk/R"]="sdk/R"
1231 testfuncargs["sdk/java-v2"]="sdk/java-v2"
1232 testfuncargs["apps/workbench_units"]="apps/workbench_units"
1233 testfuncargs["apps/workbench_functionals"]="apps/workbench_functionals"
1234 testfuncargs["apps/workbench_integration"]="apps/workbench_integration"
1235 testfuncargs["apps/workbench_benchmark"]="apps/workbench_benchmark"
1236 testfuncargs["apps/workbench_profile"]="apps/workbench_profile"
1238 if [[ -z ${interactive} ]]; then
1245 if [[ -e "$VENVDIR/bin/activate" ]]; then stop_services; fi
1247 if [[ "$TERM" = dumb ]]; then
1248 # assume emacs, or something, is offering a history buffer
1249 # and pre-populating the command will only cause trouble
1251 elif [[ ! -e "$VENVDIR/bin/activate" ]]; then
1252 nextcmd="install deps"
1259 nextcmd="install deps"
1261 HISTFILE="$WORKSPACE/tmp/.history"
1263 while read -p 'What next? ' -e -i "$nextcmd" nextcmd; do
1264 history -s "$nextcmd"
1266 read verb target opts <<<"${nextcmd}"
1267 target="${target%/}"
1268 target="${target/\/:/:}"
1285 testargs["$target"]="${opts}"
1286 tt="${testfuncargs[${target}]}"
1296 if [[ ${#successes[@]} -gt 0 || ${#failures[@]} -gt 0 ]]; then