3 # Copyright (C) The Arvados Authors. All rights reserved.
5 # SPDX-License-Identifier: CC-BY-SA-3.0
7 # If you want to test arvados in a single host, you can run this script, which
8 # will install it using salt masterless
9 # This script is run by the Vagrant file when you run it with
15 # capture the directory that the script is running from
16 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
20 echo >&2 "Usage: ${0} [-h] [-h]"
22 echo >&2 "${0} options:"
23 echo >&2 " -d, --debug Run salt installation in debug mode"
24 echo >&2 " -c <local.params>, --config <local.params> Path to the local.params config file"
25 echo >&2 " -t, --test Test installation running a CWL workflow"
26 echo >&2 " -r, --roles List of Arvados roles to apply to the host, comma separated"
27 echo >&2 " Possible values are:"
29 echo >&2 " controller"
30 echo >&2 " dispatcher"
38 echo >&2 " workbench2"
39 echo >&2 " Defaults to applying them all"
40 echo >&2 " -h, --help Display this help and exit"
41 echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
42 echo >&2 " This parameter does not perform any installation at all. It's"
43 echo >&2 " intended to give you a parsed sot of configuration files so"
44 echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
46 echo >&2 " - parses the pillar and states templates,"
47 echo >&2 " - downloads the helper formulas with their desired versions,"
48 echo >&2 " - prepares the 'top.sls' files both for pillars and states"
49 echo >&2 " for the selected role/s"
50 echo >&2 " - writes the resulting files into <dest_dir>"
51 echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
52 echo >&2 " --development Run in dev mode, using snakeoil certs"
57 # NOTE: This requires GNU getopt (part of the util-linux package on Debian-based distros).
58 if ! which getopt > /dev/null; then
59 echo >&2 "GNU getopt is required to run this script. Please install it and re-reun it"
63 TEMP=$(getopt -o c:dhp:r:tv \
64 --long config:,debug,development,dump-config:,help,roles:,test,vagrant \
68 then echo "Please check the parameters you entered and re-run again"
71 # Note the quotes around `$TEMP': they are essential!
74 while [ ${#} -ge 1 ]; do
86 if [[ ${2} = /* ]]; then
87 DUMP_SALT_CONFIG_DIR=${2}
89 DUMP_SALT_CONFIG_DIR=${PWD}/${2}
92 S_DIR="${DUMP_SALT_CONFIG_DIR}/salt"
94 F_DIR="${DUMP_SALT_CONFIG_DIR}/formulas"
96 P_DIR="${DUMP_SALT_CONFIG_DIR}/pillars"
98 T_DIR="${DUMP_SALT_CONFIG_DIR}/tests"
109 # Verify the role exists
110 if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepproxy,shell,workbench,dispatcher" == *"$i"* ]]; then
111 echo "The role '${i}' is not a valid role"
115 ROLES="${ROLES} ${i}"
143 mkdir -p /srv/salt/certs
145 if [ -f ${cert_dir}/${cert_name}.crt ]; then
146 cp -v ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
148 echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
151 if [ -f ${cert_dir}/${cert_name}.key ]; then
152 cp -v ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
154 echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
160 CONFIG_FILE="${SCRIPT_DIR}/local.params"
161 CONFIG_DIR="local_config_dir"
164 CONTROLLER_EXT_SSL_PORT=443
170 # Hostnames/IPs used for single-host deploys
172 HOSTNAME_INT="127.0.1.1"
176 INITIAL_USER_EMAIL=""
177 INITIAL_USER_PASSWORD=""
179 CONTROLLER_EXT_SSL_PORT=8000
180 KEEP_EXT_SSL_PORT=25101
181 # Both for collections and downloads
182 KEEPWEB_EXT_SSL_PORT=9002
183 WEBSHELL_EXT_SSL_PORT=4202
184 WEBSOCKET_EXT_SSL_PORT=8002
185 WORKBENCH1_EXT_SSL_PORT=443
186 WORKBENCH2_EXT_SSL_PORT=3001
189 CUSTOM_CERTS_DIR="${SCRIPT_DIR}/certs"
191 ## These are ARVADOS-related parameters
192 # For a stable release, change RELEASE "production" and VERSION to the
193 # package version (including the iteration, e.g. X.Y.Z-1) of the
195 # The "local.params.example.*" files already set "RELEASE=production"
196 # to deploy production-ready packages
197 RELEASE="development"
200 # These are arvados-formula-related parameters
201 # An arvados-formula tag. For a stable release, this should be a
202 # branch name (e.g. X.Y-dev) or tag for the release.
203 # ARVADOS_TAG="2.2.0"
206 # Other formula versions we depend on
207 POSTGRES_TAG="v0.43.0"
208 NGINX_TAG="temp-fix-missing-statements-in-pillar"
211 LETSENCRYPT_TAG="v2.1.0"
214 DUMP_SALT_CONFIG_DIR=""
218 F_DIR="/srv/formulas"
222 T_DIR="/tmp/cluster_tests"
226 if [ -s ${CONFIG_FILE} ]; then
227 source ${CONFIG_FILE}
229 echo >&2 "You don't seem to have a config file with initial values."
230 echo >&2 "Please create a '${CONFIG_FILE}' file as described in"
231 echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
232 echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
236 if [ ! -d ${CONFIG_DIR} ]; then
237 echo >&2 "You don't seem to have a config directory with pillars and states."
238 echo >&2 "Please create a '${CONFIG_DIR}' directory (as configured in your '${CONFIG_FILE}'). Please see"
239 echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
240 echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
244 if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
245 echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
246 echo >&2 "Please, fix them and re-run the provision script."
250 if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
251 echo >&2 "ERROR: <CLUSTER> must be exactly 5 alphanumeric characters long"
252 echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
256 # Only used in single_host/single_name deploys
257 if [ "x${HOSTNAME_EXT}" = "x" ] ; then
258 HOSTNAME_EXT="${CLUSTER}.${DOMAIN}"
261 if [ "${DUMP_CONFIG}" = "yes" ]; then
262 echo "The provision installer will just dump a config under ${DUMP_SALT_CONFIG_DIR} and exit"
264 # Install a few dependency packages
265 # First, let's figure out the OS we're working on
266 OS_ID=$(grep ^ID= /etc/os-release |cut -f 2 -d= |cut -f 2 -d \")
267 echo "Detected distro: ${OS_ID}"
271 echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
272 sed -i 's/SELINUX=enforcing/SELINUX=permissive' /etc/sysconfig/selinux
273 setenforce permissive
274 yum install -y curl git jq
277 DEBIAN_FRONTEND=noninteractive apt update
278 DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
282 if which salt-call; then
283 echo "Salt already installed"
285 curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
286 sh /tmp/bootstrap_salt.sh -XdfP -x python3
287 /bin/systemctl stop salt-minion.service
288 /bin/systemctl disable salt-minion.service
291 # Set salt to masterless mode
292 cat > /etc/salt/minion << EOFSM
307 mkdir -p ${S_DIR} ${F_DIR} ${P_DIR} ${T_DIR}
309 # Get the formula and dependencies
310 cd ${F_DIR} || exit 1
311 echo "Cloning formulas"
312 rm -rf ${F_DIR}/* || exit 1
313 git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
314 ( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" -b "${DOCKER_TAG}" )
316 git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
317 ( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" -b "${LOCALE_TAG}" )
319 git clone --quiet https://github.com/netmanagers/nginx-formula.git ${F_DIR}/nginx
320 ( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" -b "${NGINX_TAG}" )
322 git clone --quiet https://github.com/saltstack-formulas/postgres-formula.git ${F_DIR}/postgres
323 ( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" -b "${POSTGRES_TAG}" )
325 git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
326 ( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" -b "${LETSENCRYPT_TAG}" )
328 git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
330 # If we want to try a specific branch of the formula
331 if [ "x${BRANCH}" != "x" ]; then
332 ( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
333 elif [ "x${ARVADOS_TAG}" != "x" ]; then
334 ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
337 if [ "x${VAGRANT}" = "xyes" ]; then
338 EXTRA_STATES_DIR="/home/vagrant/${CONFIG_DIR}/states"
339 SOURCE_PILLARS_DIR="/home/vagrant/${CONFIG_DIR}/pillars"
340 SOURCE_TESTS_DIR="/home/vagrant/${TESTS_DIR}"
342 EXTRA_STATES_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/states"
343 SOURCE_PILLARS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/pillars"
344 SOURCE_TESTS_DIR="${SCRIPT_DIR}/${TESTS_DIR}"
347 SOURCE_STATES_DIR="${EXTRA_STATES_DIR}"
349 echo "Writing pillars and states"
351 # Replace variables (cluster, domain, etc) in the pillars, states and tests
352 # to ease deployment for newcomers
353 if [ ! -d "${SOURCE_PILLARS_DIR}" ]; then
354 echo "${SOURCE_PILLARS_DIR} does not exist or is not a directory. Exiting."
357 for f in $(ls "${SOURCE_PILLARS_DIR}"/*); do
358 sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
359 s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
360 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
361 s#__CLUSTER__#${CLUSTER}#g;
362 s#__DOMAIN__#${DOMAIN}#g;
363 s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
364 s#__HOSTNAME_INT__#${HOSTNAME_INT}#g;
365 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
366 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
367 s#__INITIAL_USER__#${INITIAL_USER}#g;
368 s#__LE_AWS_REGION__#${LE_AWS_REGION}#g;
369 s#__LE_AWS_SECRET_ACCESS_KEY__#${LE_AWS_SECRET_ACCESS_KEY}#g;
370 s#__LE_AWS_ACCESS_KEY_ID__#${LE_AWS_ACCESS_KEY_ID}#g;
371 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
372 s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
373 s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
374 s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
375 s#__RELEASE__#${RELEASE}#g;
376 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
377 s#__VERSION__#${VERSION}#g;
378 s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
379 s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
380 s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
381 s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
382 s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
383 s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
384 s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
385 s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
386 s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
387 s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
388 s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
389 s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
390 s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
391 s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
392 s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
393 s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
394 s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
395 "${f}" > "${P_DIR}"/$(basename "${f}")
398 if [ "x${TEST}" = "xyes" ] && [ ! -d "${SOURCE_TESTS_DIR}" ]; then
399 echo "You requested to run tests, but ${SOURCE_TESTS_DIR} does not exist or is not a directory. Exiting."
403 # Replace cluster and domain name in the test files
404 for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
405 sed "s#__CLUSTER__#${CLUSTER}#g;
406 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
407 s#__DOMAIN__#${DOMAIN}#g;
408 s#__HOSTNAME_INT__#${HOSTNAME_INT}#g;
409 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
410 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
411 s#__INITIAL_USER__#${INITIAL_USER}#g;
412 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
413 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g" \
414 "${f}" > ${T_DIR}/$(basename "${f}")
416 chmod 755 ${T_DIR}/run-test.sh
418 # Replace helper state files that differ from the formula's examples
419 if [ -d "${SOURCE_STATES_DIR}" ]; then
420 mkdir -p "${F_DIR}"/extra/extra
422 for f in $(ls "${SOURCE_STATES_DIR}"/*); do
423 sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
424 s#__CLUSTER__#${CLUSTER}#g;
425 s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
426 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
427 s#__DOMAIN__#${DOMAIN}#g;
428 s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
429 s#__HOSTNAME_INT__#${HOSTNAME_INT}#g;
430 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
431 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
432 s#__INITIAL_USER__#${INITIAL_USER}#g;
433 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
434 s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
435 s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
436 s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
437 s#__RELEASE__#${RELEASE}#g;
438 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
439 s#__VERSION__#${VERSION}#g;
440 s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
441 s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
442 s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
443 s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
444 s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
445 s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
446 s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
447 s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
448 s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
449 s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
450 s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
451 s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
452 s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
453 s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
454 s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
455 s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
456 "${f}" > "${F_DIR}/extra/extra"/$(basename "${f}")
460 # Now, we build the SALT states/pillars trees
461 # As we need to separate both states and pillars in case we want specific
462 # roles, we iterate on both at the same time
465 cat > ${S_DIR}/top.sls << EOFTSLS
472 cat > ${P_DIR}/top.sls << EOFPSLS
479 # States, extra states
480 if [ -d "${F_DIR}"/extra/extra ]; then
481 if [ "$DEV_MODE" = "yes" ]; then
482 # In dev mode, we create some snake oil certs that we'll
483 # use as CUSTOM_CERTS, so we don't skip the states file
484 SKIP_SNAKE_OIL="dont_snakeoil_certs"
486 SKIP_SNAKE_OIL="snakeoil_certs"
488 for f in $(ls "${F_DIR}"/extra/extra/*.sls | grep -v ${SKIP_SNAKE_OIL}); do
489 echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
492 if [ "x${USE_LETSENCRYPT}" != "xyes" ]; then
493 mkdir -p "${F_DIR}"/extra/extra/files
497 # If we want specific roles for a node, just add the desired states
498 # and its dependencies
499 if [ -z "${ROLES}" ]; then
501 echo " - nginx.passenger" >> ${S_DIR}/top.sls
502 # Currently, only available on config_examples/multi_host/aws
503 if [ "x${USE_LETSENCRYPT}" = "xyes" ]; then
504 if [ "x${USE_LETSENCRYPT_IAM_USER}" != "xyes" ]; then
505 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - extra.aws_credentials" >> ${S_DIR}/top.sls
507 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
510 # Copy certs to formula extra/files
511 # In dev mode, the files will be created and put in the destination directory by the
512 # snakeoil_certs.sls state file
513 mkdir -p /srv/salt/certs
514 cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
515 # We add the custom_certs state
516 grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
519 echo " - postgres" >> ${S_DIR}/top.sls
520 echo " - docker.software" >> ${S_DIR}/top.sls
521 echo " - arvados" >> ${S_DIR}/top.sls
524 echo " - docker" >> ${P_DIR}/top.sls
525 echo " - nginx_api_configuration" >> ${P_DIR}/top.sls
526 echo " - nginx_controller_configuration" >> ${P_DIR}/top.sls
527 echo " - nginx_keepproxy_configuration" >> ${P_DIR}/top.sls
528 echo " - nginx_keepweb_configuration" >> ${P_DIR}/top.sls
529 echo " - nginx_passenger" >> ${P_DIR}/top.sls
530 echo " - nginx_websocket_configuration" >> ${P_DIR}/top.sls
531 echo " - nginx_webshell_configuration" >> ${P_DIR}/top.sls
532 echo " - nginx_workbench2_configuration" >> ${P_DIR}/top.sls
533 echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
534 echo " - postgresql" >> ${P_DIR}/top.sls
536 # Currently, only available on config_examples/multi_host/aws
537 if [ "x${USE_LETSENCRYPT}" = "xyes" ]; then
538 if [ "x${USE_LETSENCRYPT_IAM_USER}" != "xyes" ]; then
539 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
541 grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
543 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
544 for c in controller websocket workbench workbench2 webshell download collections keepproxy; do
545 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${c}.${CLUSTER}.${DOMAIN}*/g;
546 s#__CERT_PEM__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
547 s#__CERT_KEY__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
548 ${P_DIR}/nginx_${c}_configuration.sls
551 # Use custom certs (either dev mode or prod)
552 grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
553 # And add the certs in the custom_certs pillar
554 echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
555 echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
557 for c in controller websocket workbench workbench2 webshell download collections keepproxy; do
558 grep -q ${c} ${P_DIR}/extra_custom_certs.sls || echo " - ${c}" >> ${P_DIR}/extra_custom_certs.sls
560 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
561 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${c}.pem/g;
562 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${c}.pem#g;
563 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${c}.key#g" \
564 ${P_DIR}/nginx_${c}_configuration.sls
568 # If we add individual roles, make sure we add the repo first
569 echo " - arvados.repo" >> ${S_DIR}/top.sls
570 # We add the custom_certs state
571 grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
573 # And we add the basic part for the certs pillar
574 if [ "x${USE_LETSENCRYPT}" != "xyes" ]; then
575 # And add the certs in the custom_certs pillar
576 echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
577 echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
578 grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
581 for R in ${ROLES}; do
585 echo " - postgres" >> ${S_DIR}/top.sls
587 echo ' - postgresql' >> ${P_DIR}/top.sls
591 # FIXME: https://dev.arvados.org/issues/17352
592 grep -q "postgres.client" ${S_DIR}/top.sls || echo " - postgres.client" >> ${S_DIR}/top.sls
593 grep -q "nginx.passenger" ${S_DIR}/top.sls || echo " - nginx.passenger" >> ${S_DIR}/top.sls
594 ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
595 ### after it. So we add this here as we are, after all, sharing the host for api and controller
596 # Currently, only available on config_examples/multi_host/aws
597 if [ "x${USE_LETSENCRYPT}" = "xyes" ]; then
598 if [ "x${USE_LETSENCRYPT_IAM_USER}" != "xyes" ]; then
599 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
601 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
604 copy_custom_cert ${CUSTOM_CERTS_DIR} controller
605 grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
607 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
609 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
610 grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
611 grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
612 grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
614 "controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
616 grep -q "nginx.passenger" ${S_DIR}/top.sls || echo " - nginx.passenger" >> ${S_DIR}/top.sls
617 # Currently, only available on config_examples/multi_host/aws
618 if [ "x${USE_LETSENCRYPT}" = "xyes" ]; then
619 if [ "x${USE_LETSENCRYPT_IAM_USER}" != "xyes" ]; then
620 grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
622 grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
624 # Use custom certs, special case for keepweb
625 if [ ${R} = "keepweb" ]; then
626 copy_custom_cert ${CUSTOM_CERTS_DIR} download
627 copy_custom_cert ${CUSTOM_CERTS_DIR} collections
629 copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
632 # webshell role is just a nginx vhost, so it has no state
633 if [ "${R}" != "webshell" ]; then
634 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
637 grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
638 grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
639 # Special case for keepweb
640 if [ ${R} = "keepweb" ]; then
641 grep -q "nginx_download_configuration" ${P_DIR}/top.sls || echo " - nginx_download_configuration" >> ${P_DIR}/top.sls
642 grep -q "nginx_collections_configuration" ${P_DIR}/top.sls || echo " - nginx_collections_configuration" >> ${P_DIR}/top.sls
645 # Currently, only available on config_examples/multi_host/aws
646 if [ "x${USE_LETSENCRYPT}" = "xyes" ]; then
647 if [ "x${USE_LETSENCRYPT_IAM_USER}" != "xyes" ]; then
648 grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
650 grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
651 grep -q "letsencrypt_${R}_configuration" ${P_DIR}/top.sls || echo " - letsencrypt_${R}_configuration" >> ${P_DIR}/top.sls
653 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
654 # Special case for keepweb
655 if [ ${R} = "keepweb" ]; then
656 for kwsub in download collections; do
657 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${kwsub}.${CLUSTER}.${DOMAIN}*/g;
658 s#__CERT_PEM__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
659 s#__CERT_KEY__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
660 ${P_DIR}/nginx_${kwsub}_configuration.sls
663 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${CLUSTER}.${DOMAIN}*/g;
664 s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
665 s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
666 ${P_DIR}/nginx_${R}_configuration.sls
669 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
670 # Special case for keepweb
671 if [ ${R} = "keepweb" ]; then
672 for kwsub in download collections; do
673 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${kwsub}.pem/g;
674 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${kwsub}.pem#g;
675 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${kwsub}.key#g" \
676 ${P_DIR}/nginx_${kwsub}_configuration.sls
677 grep -q ${kwsub} ${P_DIR}/extra_custom_certs.sls || echo " - ${kwsub}" >> ${P_DIR}/extra_custom_certs.sls
680 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${R}.pem/g;
681 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
682 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
683 ${P_DIR}/nginx_${R}_configuration.sls
684 grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
690 grep -q "docker" ${S_DIR}/top.sls || echo " - docker.software" >> ${S_DIR}/top.sls
691 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
693 grep -q "docker" ${P_DIR}/top.sls || echo " - docker" >> ${P_DIR}/top.sls
697 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
699 # ATM, no specific pillar needed
703 grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
705 # ATM, no specific pillar needed
708 echo "Unknown role ${R}"
715 if [ "${DUMP_CONFIG}" = "yes" ]; then
716 # We won't run the rest of the script because we're just dumping the config
720 # FIXME! #16992 Temporary fix for psql call in arvados-api-server
721 if [ -e /root/.psqlrc ]; then
722 if ! ( grep 'pset pager off' /root/.psqlrc ); then
724 cp /root/.psqlrc /root/.psqlrc.provision.backup
730 echo '\pset pager off' >> /root/.psqlrc
731 # END FIXME! #16992 Temporary fix for psql call in arvados-api-server
733 # Now run the install
734 salt-call --local state.apply -l ${LOG_LEVEL}
736 # FIXME! #16992 Temporary fix for psql call in arvados-api-server
737 if [ "x${DELETE_PSQL}" = "xyes" ]; then
738 echo "Removing .psql file"
742 if [ "x${RESTORE_PSQL}" = "xyes" ]; then
743 echo "Restoring .psql file"
744 mv -v /root/.psqlrc.provision.backup /root/.psqlrc
746 # END FIXME! #16992 Temporary fix for psql call in arvados-api-server
748 # Leave a copy of the Arvados CA so the user can copy it where it's required
749 if [ "$DEV_MODE" = "yes" ]; then
750 echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
751 # If running in a vagrant VM, also add default user to docker group
752 if [ "x${VAGRANT}" = "xyes" ]; then
753 cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
755 echo "Adding the vagrant user to the docker group"
756 usermod -a -G docker vagrant
758 cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
762 # Test that the installation finished correctly
763 if [ "x${TEST}" = "xyes" ]; then
765 # If we use RVM, we need to run this with it, or most ruby commands will fail
767 if [ -x /usr/local/rvm/bin/rvm-exec ]; then
768 RVM_EXEC="/usr/local/rvm/bin/rvm-exec"
770 ${RVM_EXEC} ./run-test.sh