3 # Copyright (C) The Arvados Authors. All rights reserved.
5 # SPDX-License-Identifier: CC-BY-SA-3.0
7 # If you want to test arvados in a single host, you can run this script, which
8 # will install it using salt masterless
9 # This script is run by the Vagrant file when you run it with
16 # capture the directory that the script is running from
17 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
21 echo >&2 "Usage: ${0} [-h] [-h]"
23 echo >&2 "${0} options:"
24 echo >&2 " -d, --debug Run salt installation in debug mode"
25 echo >&2 " -c <local.params>, --config <local.params> Path to the local.params config file"
26 echo >&2 " -t, --test Test installation running a CWL workflow"
27 echo >&2 " -r, --roles List of Arvados roles to apply to the host, comma separated"
28 echo >&2 " Possible values are:"
30 echo >&2 " controller"
31 echo >&2 " dispatcher"
33 echo >&2 " keepbalance"
36 echo >&2 " monitoring"
41 echo >&2 " workbench2"
42 echo >&2 " Defaults to applying them all"
43 echo >&2 " -h, --help Display this help and exit"
44 echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
45 echo >&2 " This parameter does not perform any installation at all. It's"
46 echo >&2 " intended to give you a parsed set of configuration files so"
47 echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
49 echo >&2 " - parses the pillar and states templates,"
50 echo >&2 " - downloads the helper formulas with their desired versions,"
51 echo >&2 " - prepares the 'top.sls' files both for pillars and states"
52 echo >&2 " for the selected role(s)"
53 echo >&2 " - writes the resulting files into <dest_dir>"
54 echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
55 echo >&2 " --development Run in dev mode, using snakeoil certs"
60 # NOTE: This requires GNU getopt (part of the util-linux package on Debian-based distros).
61 if ! which getopt > /dev/null; then
62 echo >&2 "GNU getopt is required to run this script. Please install it and re-reun it"
66 TEMP=$(getopt -o c:dhp:r:tv \
67 --long config:,debug,development,dump-config:,help,roles:,test,vagrant \
71 then echo "Please check the parameters you entered and re-run again"
74 # Note the quotes around `$TEMP': they are essential!
77 while [ ${#} -ge 1 ]; do
89 if [[ ${2} = /* ]]; then
90 DUMP_SALT_CONFIG_DIR=${2}
92 DUMP_SALT_CONFIG_DIR=${PWD}/${2}
95 S_DIR="${DUMP_SALT_CONFIG_DIR}/salt"
97 F_DIR="${DUMP_SALT_CONFIG_DIR}/formulas"
99 P_DIR="${DUMP_SALT_CONFIG_DIR}/pillars"
101 T_DIR="${DUMP_SALT_CONFIG_DIR}/tests"
112 # Verify the role exists
113 if [[ ! "database,balancer,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher,monitoring" == *"$i"* ]]; then
114 echo "The role '${i}' is not a valid role"
118 ROLES="${ROLES:-} ${i}"
146 mkdir -p --mode=0700 /srv/salt/certs
148 if [ -f ${cert_dir}/${cert_name}.crt ]; then
149 install --mode=0600 ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
151 echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
154 if [ -f ${cert_dir}/${cert_name}.key ]; then
155 install --mode=0600 ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
157 echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
162 apply_var_substitutions() {
165 sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
166 s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
167 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
168 s#__CLUSTER__#${CLUSTER}#g;
169 s#__DOMAIN__#${DOMAIN}#g;
170 s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
171 s#__IP_INT__#${IP_INT}#g;
172 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
173 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
174 s#__INITIAL_USER__#${INITIAL_USER}#g;
175 s#__LE_AWS_REGION__#${LE_AWS_REGION:-}#g;
176 s#__LE_AWS_SECRET_ACCESS_KEY__#${LE_AWS_SECRET_ACCESS_KEY:-}#g;
177 s#__LE_AWS_ACCESS_KEY_ID__#${LE_AWS_ACCESS_KEY_ID:-}#g;
178 s#__DATABASE_NAME__#${DATABASE_NAME}#g;
179 s#__DATABASE_USER__#${DATABASE_USER}#g;
180 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
181 s#__DATABASE_INT_IP__#${DATABASE_INT_IP:-}#g;
182 s#__DATABASE_EXTERNAL_SERVICE_HOST_OR_IP__#${DATABASE_EXTERNAL_SERVICE_HOST_OR_IP:-}#g;
183 s#__DATABASE_POSTGRESQL_VERSION__#${DATABASE_POSTGRESQL_VERSION}#g;
184 s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
185 s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
186 s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
187 s#__RELEASE__#${RELEASE}#g;
188 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
189 s#__VERSION__#${VERSION}#g;
190 s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
191 s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
192 s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
193 s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
194 s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
195 s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
196 s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
197 s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
198 s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
199 s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
200 s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
201 s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
202 s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
203 s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
204 s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
205 s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION:-}#g;
206 s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g;
207 s#__CONTROLLER_MAX_WORKERS__#${CONTROLLER_MAX_WORKERS:-}#g;
208 s#__CONTROLLER_MAX_QUEUED_REQUESTS__#${CONTROLLER_MAX_QUEUED_REQUESTS:-128}#g;
209 s#__CONTROLLER_MAX_GATEWAY_TUNNELS__#${CONTROLLER_MAX_GATEWAY_TUNNELS:-1000}#g;
210 s#__MONITORING_USERNAME__#${MONITORING_USERNAME}#g;
211 s#__MONITORING_EMAIL__#${MONITORING_EMAIL}#g;
212 s#__MONITORING_PASSWORD__#${MONITORING_PASSWORD}#g;
213 s#__DISPATCHER_SSH_PRIVKEY__#${DISPATCHER_SSH_PRIVKEY//$'\n'/\\n}#g;
214 s#__ENABLE_BALANCER__#${ENABLE_BALANCER}#g;
215 s#__DISABLED_CONTROLLER__#${DISABLED_CONTROLLER}#g;
216 s#__BALANCER_NODENAME__#${ROLE2NODES['balancer']:-}#g;
217 s#__PROMETHEUS_NODENAME__#${ROLE2NODES['monitoring']:-}#g;
218 s#__PROMETHEUS_DATA_RETENTION_TIME__#${PROMETHEUS_DATA_RETENTION_TIME:-15d}#g;
219 s#__CONTROLLER_NODES__#${ROLE2NODES['controller']:-}#g;
220 s#__NODELIST__#${NODELIST}#g;
221 s#__DISPATCHER_INT_IP__#${DISPATCHER_INT_IP}#g;
222 s#__KEEPBALANCE_INT_IP__#${KEEPBALANCE_INT_IP}#g;
223 s#__COMPUTE_AMI__#${COMPUTE_AMI:-}#g;
224 s#__COMPUTE_SG__#${COMPUTE_SG:-}#g;
225 s#__COMPUTE_SUBNET__#${COMPUTE_SUBNET:-}#g;
226 s#__COMPUTE_AWS_REGION__#${COMPUTE_AWS_REGION:-}#g;
227 s#__COMPUTE_USER__#${COMPUTE_USER:-}#g;
228 s#__KEEP_AWS_S3_BUCKET__#${KEEP_AWS_S3_BUCKET:-}#g;
229 s#__KEEP_AWS_IAM_ROLE__#${KEEP_AWS_IAM_ROLE:-}#g;
230 s#__KEEP_AWS_REGION__#${KEEP_AWS_REGION:-}#g" \
231 "${SRCFILE}" > "${DSTFILE}"
235 CONFIG_FILE="${SCRIPT_DIR}/local.params"
236 CONFIG_DIR="local_config_dir"
239 CONTROLLER_EXT_SSL_PORT=443
242 NGINX_INSTALL_SOURCE="install_from_repo"
247 # Hostnames/IPs used for single-host deploys
252 INITIAL_USER_EMAIL=""
253 INITIAL_USER_PASSWORD=""
255 CONTROLLER_EXT_SSL_PORT=8000
256 KEEP_EXT_SSL_PORT=25101
257 # Both for collections and downloads
258 KEEPWEB_EXT_SSL_PORT=9002
259 WEBSHELL_EXT_SSL_PORT=4202
260 WEBSOCKET_EXT_SSL_PORT=8002
261 WORKBENCH1_EXT_SSL_PORT=443
262 WORKBENCH2_EXT_SSL_PORT=3001
264 SSL_MODE="self-signed"
265 USE_LETSENCRYPT_ROUTE53="no"
266 CUSTOM_CERTS_DIR="${SCRIPT_DIR}/local_config_dir/certs"
268 GRAFANA_DASHBOARDS_DIR="${SCRIPT_DIR}/local_config_dir/dashboards"
270 ## These are ARVADOS-related parameters
271 # For a stable release, change RELEASE "production" and VERSION to the
272 # package version (including the iteration, e.g. X.Y.Z-1) of the
274 # The "local.params.example.*" files already set "RELEASE=production"
275 # to deploy production-ready packages
276 RELEASE="development"
279 # These are arvados-formula-related parameters
280 # An arvados-formula tag. For a stable release, this should be a
281 # branch name (e.g. X.Y-dev) or tag for the release.
282 # ARVADOS_TAG="2.2.0"
285 # We pin the salt version to avoid potential incompatibilities when a new
286 # stable version is released.
289 # Other formula versions we depend on
290 POSTGRES_TAG="7529300c287b1c288af0f494ca668c2217bd1c5d"
291 POSTGRES_URL="https://github.com/saltstack-formulas/postgres-formula.git"
295 LETSENCRYPT_TAG="v3.2.0"
296 LOGROTATE_TAG="v0.14.0"
297 PROMETHEUS_TAG="v5.6.5"
301 DUMP_SALT_CONFIG_DIR=""
304 STATES_TOP=${S_DIR}/top.sls
306 F_DIR="/srv/formulas"
309 PILLARS_TOP=${P_DIR}/top.sls
311 T_DIR="/tmp/cluster_tests"
316 declare -A ROLE2NODES
321 if [ ! -d ${CONFIG_DIR} ]; then
322 echo >&2 "You don't seem to have a config directory with pillars and states."
323 echo >&2 "Please create a '${CONFIG_DIR}' directory (as configured in your '${CONFIG_FILE}'). Please see"
324 echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
325 echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
329 if grep -rni 'fixme' ${CONFIG_FILE}.secrets ${CONFIG_FILE} ${CONFIG_DIR} ; then
330 echo >&2 "The config files has some parameters that need to be modified."
331 echo >&2 "Please, fix them and re-run the provision script."
335 if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
336 echo >&2 "ERROR: <CLUSTER> must be exactly 5 lowercase alphanumeric characters long"
337 echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
341 # Only used in single_host/single_name deploys
342 if [ ! -z "${HOSTNAME_EXT:-}" ] ; then
343 # We need to add some extra control vars to manage a single certificate vs. multiple
344 USE_SINGLE_HOSTNAME="yes"
345 # Make sure that the value configured as IP_INT is a real IP on the system.
346 # If we don't error out early here when there is a mismatch, the formula will
347 # fail with hard to interpret nginx errors later on.
348 ip addr list |grep "${IP_INT}/" >/dev/null
349 if [[ $? -ne 0 ]]; then
350 echo "Unable to find the IP_INT address '${IP_INT}' on the system, please correct the value in local.params. Exiting..."
354 USE_SINGLE_HOSTNAME="no"
355 # We set this variable, anyway, so sed lines do not fail and we don't need to add more
357 HOSTNAME_EXT="${DOMAIN}"
360 if [ "${DUMP_CONFIG}" = "yes" ]; then
361 echo "The provision installer will just dump a config under ${DUMP_SALT_CONFIG_DIR} and exit"
363 # Install a few dependency packages
364 # First, let's figure out the OS we're working on
365 OS_IDS="$(. /etc/os-release && echo "${ID:-} ${ID_LIKE:-}")"
366 echo "Detected distro families: $OS_IDS"
368 for OS_ID in $OS_IDS; do
371 echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
372 sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
373 setenforce permissive
374 yum install -y curl git jq
378 DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
379 DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
385 if which salt-call; then
386 echo "Salt already installed"
388 curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
389 sh /tmp/bootstrap_salt.sh -XdfP -x python3 stable ${SALT_VERSION}
390 /bin/systemctl stop salt-minion.service
391 /bin/systemctl disable salt-minion.service
394 # Set salt to masterless mode
395 cat > /etc/salt/minion << EOFSM
410 mkdir -p ${S_DIR} ${F_DIR} ${P_DIR} ${T_DIR}
412 # Get the formula and dependencies
413 cd ${F_DIR} || exit 1
414 echo "Cloning formulas"
415 test -d docker && ( cd docker && git fetch ) \
416 || git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
417 ( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" )
420 test -d locale && ( cd locale && git fetch ) \
421 || git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
422 ( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" )
425 test -d nginx && ( cd nginx && git fetch ) \
426 || git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
427 ( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" )
430 test -d postgres && ( cd postgres && git fetch ) \
431 || git clone --quiet ${POSTGRES_URL} ${F_DIR}/postgres
432 ( cd postgres && git checkout --quiet "${POSTGRES_TAG}" )
435 test -d prometheus && ( cd prometheus && git fetch ) \
436 || git clone --quiet https://github.com/saltstack-formulas/prometheus-formula.git ${F_DIR}/prometheus
437 ( cd prometheus && git checkout --quiet tags/"${PROMETHEUS_TAG}" )
440 test -d grafana && ( cd grafana && git fetch ) \
441 || git clone --quiet https://github.com/saltstack-formulas/grafana-formula.git ${F_DIR}/grafana
442 ( cd grafana && git checkout --quiet "${GRAFANA_TAG}" )
444 echo "...letsencrypt"
445 test -d letsencrypt && ( cd letsencrypt && git fetch ) \
446 || git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
447 ( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" )
450 test -d logrotate && ( cd logrotate && git fetch ) \
451 || git clone --quiet https://github.com/saltstack-formulas/logrotate-formula.git ${F_DIR}/logrotate
452 ( cd logrotate && git checkout --quiet tags/"${LOGROTATE_TAG}" )
455 test -d arvados || git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
457 # If we want to try a specific branch of the formula
458 if [[ ! -z "${BRANCH:-}" && "x${BRANCH}" != "xmain" ]]; then
459 ( cd ${F_DIR}/arvados && git fetch && git checkout --quiet "${BRANCH}" || git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
460 elif [ "x${ARVADOS_TAG:-}" != "x" ]; then
461 ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
464 if [ "x${VAGRANT:-}" = "xyes" ]; then
465 EXTRA_STATES_DIR="/home/vagrant/${CONFIG_DIR}/states"
466 SOURCE_PILLARS_DIR="/home/vagrant/${CONFIG_DIR}/pillars"
467 SOURCE_TOFS_DIR="/home/vagrant/${CONFIG_DIR}/tofs"
468 SOURCE_TESTS_DIR="/home/vagrant/${TESTS_DIR}"
470 EXTRA_STATES_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/states"
471 SOURCE_PILLARS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/pillars"
472 SOURCE_TOFS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/tofs"
473 SOURCE_TESTS_DIR="${SCRIPT_DIR}/${TESTS_DIR}"
476 SOURCE_STATES_DIR="${EXTRA_STATES_DIR}"
478 echo "Writing pillars and states"
480 # Replace variables (cluster, domain, etc) in the pillars, states and tests
481 # to ease deployment for newcomers
482 if [ ! -d "${SOURCE_PILLARS_DIR}" ]; then
483 echo "${SOURCE_PILLARS_DIR} does not exist or is not a directory. Exiting."
486 for f in $(ls "${SOURCE_PILLARS_DIR}"/*); do
487 apply_var_substitutions "${f}" "${P_DIR}"/$(basename "${f}")
490 if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
491 echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
492 if [ "x${TEST:-}" = "xyes" ]; then
493 echo "WARNING: Disabling tests for this installation."
498 # Replace cluster and domain name in the test files
499 for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
500 FILTERS="s#__CLUSTER__#${CLUSTER}#g;
501 s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
502 s#__DOMAIN__#${DOMAIN}#g;
503 s#__IP_INT__#${IP_INT}#g;
504 s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
505 s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
506 s#__INITIAL_USER__#${INITIAL_USER}#g;
507 s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
508 s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
509 if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
510 FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
514 "${f}" > ${T_DIR}/$(basename "${f}")
516 chmod 755 ${T_DIR}/run-test.sh
519 # Replace helper state files that differ from the formula's examples
520 if [ -d "${SOURCE_STATES_DIR}" ]; then
521 mkdir -p "${F_DIR}"/extra/extra
522 rm -rf "${F_DIR}"/extra/extra/*
524 for f in $(ls "${SOURCE_STATES_DIR}"/*); do
525 apply_var_substitutions "${f}" "${F_DIR}/extra/extra"/$(basename "${f}")
529 # Now, we build the SALT states/pillars trees
530 # As we need to separate both states and pillars in case we want specific
531 # roles, we iterate on both at the same time
533 # Formula template overrides (TOFS)
534 # See: https://template-formula.readthedocs.io/en/latest/TOFS_pattern.html#template-override
535 if [ -d ${SOURCE_TOFS_DIR} ]; then
536 find ${SOURCE_TOFS_DIR} -mindepth 1 -maxdepth 1 -type d -exec cp -r "{}" ${S_DIR} \;
540 cat > ${STATES_TOP} << EOFTSLS
547 cat > ${PILLARS_TOP} << EOFPSLS
554 # States, extra states
555 if [ -d "${F_DIR}"/extra/extra ]; then
556 SKIP_SNAKE_OIL="snakeoil_certs"
558 if [[ "$DEV_MODE" = "yes" || "${SSL_MODE}" == "self-signed" ]] ; then
559 # In dev mode, we create some snake oil certs that we'll
560 # use as CUSTOM_CERTS, so we don't skip the states file.
561 # Same when using self-signed certificates.
562 SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
564 for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
565 echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${STATES_TOP}
567 # Use byo or self-signed certificates
568 if [ "${SSL_MODE}" != "lets-encrypt" ]; then
569 mkdir -p "${F_DIR}"/extra/extra/files
573 # If we want specific roles for a node, just add the desired states
574 # and its dependencies
575 if [ -z "${ROLES:-}" ]; then
577 echo " - nginx.passenger" >> ${STATES_TOP}
578 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
579 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
580 grep -q "aws_credentials" ${STATES_TOP} || echo " - extra.aws_credentials" >> ${STATES_TOP}
582 grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
584 mkdir -p --mode=0700 /srv/salt/certs
585 if [ "${SSL_MODE}" = "bring-your-own" ]; then
586 # Copy certs to formula extra/files
587 install --mode=0600 ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
588 # We add the custom_certs state
589 grep -q "custom_certs" ${STATES_TOP} || echo " - extra.custom_certs" >> ${STATES_TOP}
590 if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
591 grep -q "ssl_key_encrypted" ${STATES_TOP} || echo " - extra.ssl_key_encrypted" >> ${STATES_TOP}
594 # In self-signed mode, the certificate files will be created and put in the
595 # destination directory by the snakeoil_certs.sls state file
598 echo " - postgres" >> ${STATES_TOP}
599 echo " - logrotate" >> ${STATES_TOP}
600 echo " - docker.software" >> ${STATES_TOP}
601 echo " - arvados.repo" >> ${STATES_TOP}
602 echo " - arvados.config" >> ${STATES_TOP}
603 echo " - arvados.ruby" >> ${STATES_TOP}
604 echo " - arvados.api" >> ${STATES_TOP}
605 echo " - arvados.controller" >> ${STATES_TOP}
606 echo " - arvados.keepstore" >> ${STATES_TOP}
607 echo " - arvados.websocket" >> ${STATES_TOP}
608 echo " - arvados.keepweb" >> ${STATES_TOP}
609 echo " - arvados.workbench2" >> ${STATES_TOP}
610 echo " - arvados.keepproxy" >> ${STATES_TOP}
611 echo " - arvados.shell" >> ${STATES_TOP}
612 echo " - arvados.dispatcher" >> ${STATES_TOP}
613 echo " - extra.shell_sudo_passwordless" >> ${STATES_TOP}
614 echo " - extra.shell_cron_add_login_sync" >> ${STATES_TOP}
615 echo " - extra.passenger_rvm" >> ${STATES_TOP}
616 echo " - extra.workbench1_uninstall" >> ${STATES_TOP}
619 echo " - docker" >> ${PILLARS_TOP}
620 echo " - nginx_api_configuration" >> ${PILLARS_TOP}
621 echo " - logrotate" >> ${PILLARS_TOP}
622 echo " - logrotate_api" >> ${PILLARS_TOP}
623 echo " - nginx_controller_configuration" >> ${PILLARS_TOP}
624 echo " - nginx_keepproxy_configuration" >> ${PILLARS_TOP}
625 echo " - nginx_keepweb_configuration" >> ${PILLARS_TOP}
626 echo " - nginx_passenger" >> ${PILLARS_TOP}
627 echo " - nginx_websocket_configuration" >> ${PILLARS_TOP}
628 echo " - nginx_webshell_configuration" >> ${PILLARS_TOP}
629 echo " - nginx_workbench2_configuration" >> ${PILLARS_TOP}
630 echo " - nginx_workbench_configuration" >> ${PILLARS_TOP}
631 echo " - logrotate_wb1" >> ${PILLARS_TOP}
632 echo " - postgresql" >> ${PILLARS_TOP}
634 # We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
635 NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
636 sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
638 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
639 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
640 grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
642 grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
644 hosts=("controller" "websocket" "workbench" "workbench2" "webshell" "keepproxy")
645 if [ ${USE_SINGLE_HOSTNAME} = "no" ]; then
646 hosts+=("download" "collections")
651 for c in "${hosts[@]}"; do
652 # Are we in a single-host-single-hostname env?
653 if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
654 # Are we in a single-host-single-hostname env?
655 CERT_NAME=${HOSTNAME_EXT}
657 # We are in a multiple-hostnames env
658 CERT_NAME=${c}.${DOMAIN}
661 # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
662 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${CERT_NAME}*/g;
663 s#__CERT_PEM__#/etc/letsencrypt/live/${CERT_NAME}/fullchain.pem#g;
664 s#__CERT_KEY__#/etc/letsencrypt/live/${CERT_NAME}/privkey.pem#g" \
665 ${P_DIR}/nginx_${c}_configuration.sls
668 # Use custom certs (either dev mode or prod)
669 grep -q "extra_custom_certs" ${PILLARS_TOP} || echo " - extra_custom_certs" >> ${PILLARS_TOP}
670 # And add the certs in the custom_certs pillar
671 echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
672 echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
674 for c in controller websocket workbench workbench2 webshell keepweb keepproxy; do
675 # Are we in a single-host-single-hostname env?
676 if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
677 # Are we in a single-host-single-hostname env?
678 CERT_NAME=${HOSTNAME_EXT}
680 # We are in a multiple-hostnames env
684 if [[ "$SSL_MODE" == "bring-your-own" ]]; then
685 copy_custom_cert ${CUSTOM_CERTS_DIR} ${CERT_NAME}
688 grep -q ${CERT_NAME} ${P_DIR}/extra_custom_certs.sls || echo " - ${CERT_NAME}" >> ${P_DIR}/extra_custom_certs.sls
690 # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
691 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${CERT_NAME}_cert_file_copy/g;
692 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${CERT_NAME}.pem#g;
693 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${CERT_NAME}.key#g" \
694 ${P_DIR}/nginx_${c}_configuration.sls
698 # If we add individual roles, make sure we add the repo first
699 echo " - arvados.repo" >> ${STATES_TOP}
700 # We add the extra_custom_certs state
701 grep -q "extra.custom_certs" ${STATES_TOP} || echo " - extra.custom_certs" >> ${STATES_TOP}
702 if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
703 grep -q "ssl_key_encrypted" ${STATES_TOP} || echo " - extra.ssl_key_encrypted" >> ${STATES_TOP}
706 # And we add the basic part for the certs pillar
707 if [ "${SSL_MODE}" != "lets-encrypt" ]; then
708 # And add the certs in the custom_certs pillar
709 echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
710 echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
711 grep -q "extra_custom_certs" ${PILLARS_TOP} || echo " - extra_custom_certs" >> ${PILLARS_TOP}
714 # Prometheus state on all nodes due to the node exporter below
715 grep -q "\- prometheus$" ${STATES_TOP} || echo " - prometheus" >> ${STATES_TOP}
716 # Prometheus node exporter pillar
717 grep -q "prometheus_node_exporter" ${PILLARS_TOP} || echo " - prometheus_node_exporter" >> ${PILLARS_TOP}
719 for R in ${ROLES:-}; do
723 grep -q "\- postgres$" ${STATES_TOP} || echo " - postgres" >> ${STATES_TOP}
724 grep -q "extra.prometheus_pg_exporter" ${STATES_TOP} || echo " - extra.prometheus_pg_exporter" >> ${STATES_TOP}
726 grep -q "postgresql" ${PILLARS_TOP} || echo " - postgresql" >> ${PILLARS_TOP}
727 grep -q "prometheus_pg_exporter" ${PILLARS_TOP} || echo " - prometheus_pg_exporter" >> ${PILLARS_TOP}
730 ### Support files ###
731 GRAFANA_DASHBOARDS_DEST_DIR=/srv/salt/dashboards
732 mkdir -p "${GRAFANA_DASHBOARDS_DEST_DIR}"
733 rm -f "${GRAFANA_DASHBOARDS_DEST_DIR}"/*
734 # "ArvadosPromDataSource" is the hardcoded UID for Prometheus' datasource
736 for f in $(ls "${GRAFANA_DASHBOARDS_DIR}"/*.json); do
737 sed "s#__TLS_EXPIRATION_YELLOW__#${TLS_EXPIRATION_YELLOW}#g;
738 s#__TLS_EXPIRATION_GREEN__#${TLS_EXPIRATION_GREEN}#g;
739 s#\${DS_PROMETHEUS}#ArvadosPromDataSource#g" \
740 "${f}" > "${GRAFANA_DASHBOARDS_DEST_DIR}"/$(basename "${f}")
744 grep -q "\- nginx$" ${STATES_TOP} || echo " - nginx" >> ${STATES_TOP}
745 grep -q "extra.nginx_prometheus_configuration" ${STATES_TOP} || echo " - extra.nginx_prometheus_configuration" >> ${STATES_TOP}
747 grep -q "\- grafana$" ${STATES_TOP} || echo " - grafana" >> ${STATES_TOP}
748 grep -q "extra.grafana_datasource" ${STATES_TOP} || echo " - extra.grafana_datasource" >> ${STATES_TOP}
749 grep -q "extra.grafana_dashboards" ${STATES_TOP} || echo " - extra.grafana_dashboards" >> ${STATES_TOP}
750 grep -q "extra.grafana_admin_user" ${STATES_TOP} || echo " - extra.grafana_admin_user" >> ${STATES_TOP}
752 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
753 grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
754 if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
755 grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
757 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
758 for SVC in grafana prometheus; do
759 copy_custom_cert ${CUSTOM_CERTS_DIR} ${SVC}
763 grep -q "prometheus_server" ${PILLARS_TOP} || echo " - prometheus_server" >> ${PILLARS_TOP}
764 grep -q "grafana" ${PILLARS_TOP} || echo " - grafana" >> ${PILLARS_TOP}
765 for SVC in grafana prometheus; do
766 grep -q "nginx_${SVC}_configuration" ${PILLARS_TOP} || echo " - nginx_${SVC}_configuration" >> ${PILLARS_TOP}
768 grep -q "nginx_snippets" ${PILLARS_TOP} || echo " - nginx_snippets" >> ${PILLARS_TOP}
769 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
770 grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
771 for SVC in grafana prometheus; do
772 grep -q "letsencrypt_${SVC}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${SVC}_configuration" >> ${PILLARS_TOP}
773 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${SVC}.${DOMAIN}*/g;
774 s#__CERT_PEM__#/etc/letsencrypt/live/${SVC}.${DOMAIN}/fullchain.pem#g;
775 s#__CERT_KEY__#/etc/letsencrypt/live/${SVC}.${DOMAIN}/privkey.pem#g" \
776 ${P_DIR}/nginx_${SVC}_configuration.sls
778 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
779 grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
781 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
782 grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
783 for SVC in grafana prometheus; do
784 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${SVC}_cert_file_copy/g;
785 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${SVC}.pem#g;
786 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${SVC}.key#g" \
787 ${P_DIR}/nginx_${SVC}_configuration.sls
788 grep -q ${SVC} ${P_DIR}/extra_custom_certs.sls || echo " - ${SVC}" >> ${P_DIR}/extra_custom_certs.sls
794 grep -q "\- nginx$" ${STATES_TOP} || echo " - nginx" >> ${STATES_TOP}
796 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
797 grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
798 if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
799 grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
801 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
802 copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
806 grep -q "nginx_${R}_configuration" ${PILLARS_TOP} || echo " - nginx_${R}_configuration" >> ${PILLARS_TOP}
808 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
809 grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
811 grep -q "letsencrypt_${R}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${R}_configuration" >> ${PILLARS_TOP}
812 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${ROLE2NODES['balancer']}*/g;
813 s#__CERT_PEM__#/etc/letsencrypt/live/${ROLE2NODES['balancer']}/fullchain.pem#g;
814 s#__CERT_KEY__#/etc/letsencrypt/live/${ROLE2NODES['balancer']}/privkey.pem#g" \
815 ${P_DIR}/nginx_${R}_configuration.sls
817 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
818 grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
820 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
821 grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
822 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${R}_cert_file_copy/g;
823 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
824 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
825 ${P_DIR}/nginx_${R}_configuration.sls
826 grep -q "${R}" ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
831 grep -q " - logrotate" ${STATES_TOP} || echo " - logrotate" >> ${STATES_TOP}
832 if grep -q " - nginx.*$" ${STATES_TOP}; then
833 sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${STATES_TOP}
835 echo " - nginx.passenger" >> ${STATES_TOP}
837 echo " - extra.passenger_rvm" >> ${STATES_TOP}
838 grep -q "^ - postgres\\.client$" ${STATES_TOP} || echo " - postgres.client" >> ${STATES_TOP}
840 ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
841 ### after it. So we add this here as we are, after all, sharing the host for api and controller
842 if [ "${ENABLE_BALANCER}" == "no" ]; then
843 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
844 if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
845 grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
847 grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
848 elif [ "${SSL_MODE}" = "bring-your-own" ]; then
849 copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
850 grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
853 grep -q "arvados.api" ${STATES_TOP} || echo " - arvados.api" >> ${STATES_TOP}
854 grep -q "arvados.controller" ${STATES_TOP} || echo " - arvados.controller" >> ${STATES_TOP}
857 grep -q "logrotate" ${PILLARS_TOP} || echo " - logrotate" >> ${PILLARS_TOP}
858 grep -q "logrotate_api" ${PILLARS_TOP} || echo " - logrotate_api" >> ${PILLARS_TOP}
859 grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
860 grep -q "postgresql" ${PILLARS_TOP} || echo " - postgresql" >> ${PILLARS_TOP}
861 grep -q "nginx_passenger" ${PILLARS_TOP} || echo " - nginx_passenger" >> ${PILLARS_TOP}
862 grep -q "nginx_snippets" ${PILLARS_TOP} || echo " - nginx_snippets" >> ${PILLARS_TOP}
863 grep -q "nginx_api_configuration" ${PILLARS_TOP} || echo " - nginx_api_configuration" >> ${PILLARS_TOP}
864 grep -q "nginx_controller_configuration" ${PILLARS_TOP} || echo " - nginx_controller_configuration" >> ${PILLARS_TOP}
866 if [ "${ENABLE_BALANCER}" == "no" ]; then
867 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
868 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
869 grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
872 grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
873 grep -q "letsencrypt_${R}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${R}_configuration" >> ${PILLARS_TOP}
874 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${DOMAIN}*/g;
875 s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${DOMAIN}/fullchain.pem#g;
876 s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${DOMAIN}/privkey.pem#g" \
877 ${P_DIR}/nginx_${R}_configuration.sls
879 grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
880 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${R}_cert_file_copy/g;
881 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
882 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
883 ${P_DIR}/nginx_${R}_configuration.sls
884 grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
887 # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
888 NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
889 sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
891 "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
893 grep -q "\- nginx$" ${STATES_TOP} || echo " - nginx" >> ${STATES_TOP}
895 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
896 if [ "x${USE_LETSENCRYPT_ROUTE53:-}" = "xyes" ]; then
897 grep -q "aws_credentials" ${STATES_TOP} || echo " - aws_credentials" >> ${STATES_TOP}
899 grep -q "letsencrypt" ${STATES_TOP} || echo " - letsencrypt" >> ${STATES_TOP}
901 # Use custom certs, special case for keepweb
902 if [ ${R} = "keepweb" ]; then
903 if [ "${SSL_MODE}" = "bring-your-own" ]; then
904 copy_custom_cert ${CUSTOM_CERTS_DIR} download
905 copy_custom_cert ${CUSTOM_CERTS_DIR} collections
908 if [ "${SSL_MODE}" = "bring-your-own" ]; then
909 copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
914 # webshell role is just a nginx vhost, so it has no state
915 # workbench role is deprecated since 2.7.0
916 if [[ "${R}" != "webshell" && "${R}" != "workbench" ]]; then
917 grep -q "arvados.${R}" ${STATES_TOP} || echo " - arvados.${R}" >> ${STATES_TOP}
919 # Make sure wb1's package get uninstalled
920 if [[ "${R}" == "workbench" ]]; then
921 grep -q "workbench1_uninstall" ${STATES_TOP} || echo " - extra.workbench1_uninstall" >> ${STATES_TOP}
925 grep -q "nginx_${R}_configuration" ${PILLARS_TOP} || echo " - nginx_${R}_configuration" >> ${PILLARS_TOP}
926 grep -q "nginx_snippets" ${PILLARS_TOP} || echo " - nginx_snippets" >> ${PILLARS_TOP}
927 # Special case for keepweb
928 if [ ${R} = "keepweb" ]; then
929 grep -q "nginx_download_configuration" ${PILLARS_TOP} || echo " - nginx_download_configuration" >> ${PILLARS_TOP}
930 grep -q "nginx_collections_configuration" ${PILLARS_TOP} || echo " - nginx_collections_configuration" >> ${PILLARS_TOP}
933 if [ "${SSL_MODE}" = "lets-encrypt" ]; then
934 if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
935 grep -q "aws_credentials" ${PILLARS_TOP} || echo " - aws_credentials" >> ${PILLARS_TOP}
937 grep -q "letsencrypt" ${PILLARS_TOP} || echo " - letsencrypt" >> ${PILLARS_TOP}
938 grep -q "letsencrypt_${R}_configuration" ${PILLARS_TOP} || echo " - letsencrypt_${R}_configuration" >> ${PILLARS_TOP}
940 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
941 # Special case for keepweb
942 if [ ${R} = "keepweb" ]; then
943 for kwsub in download collections; do
944 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${kwsub}.${DOMAIN}*/g;
945 s#__CERT_PEM__#/etc/letsencrypt/live/${kwsub}.${DOMAIN}/fullchain.pem#g;
946 s#__CERT_KEY__#/etc/letsencrypt/live/${kwsub}.${DOMAIN}/privkey.pem#g" \
947 ${P_DIR}/nginx_${kwsub}_configuration.sls
950 sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${DOMAIN}*/g;
951 s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${DOMAIN}/fullchain.pem#g;
952 s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${DOMAIN}/privkey.pem#g" \
953 ${P_DIR}/nginx_${R}_configuration.sls
956 grep -q "ssl_key_encrypted" ${PILLARS_TOP} || echo " - ssl_key_encrypted" >> ${PILLARS_TOP}
957 # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
958 # Special case for keepweb
959 if [ ${R} = "keepweb" ]; then
960 for kwsub in download collections; do
961 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${kwsub}_cert_file_copy/g;
962 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${kwsub}.pem#g;
963 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${kwsub}.key#g" \
964 ${P_DIR}/nginx_${kwsub}_configuration.sls
965 grep -q ${kwsub} ${P_DIR}/extra_custom_certs.sls || echo " - ${kwsub}" >> ${P_DIR}/extra_custom_certs.sls
968 sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_${R}_cert_file_copy/g;
969 s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
970 s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
971 ${P_DIR}/nginx_${R}_configuration.sls
972 grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
975 # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
976 sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
980 echo " - extra.shell_sudo_passwordless" >> ${STATES_TOP}
981 echo " - extra.shell_cron_add_login_sync" >> ${STATES_TOP}
982 grep -q "docker" ${STATES_TOP} || echo " - docker.software" >> ${STATES_TOP}
983 grep -q "arvados.${R}" ${STATES_TOP} || echo " - arvados.${R}" >> ${STATES_TOP}
985 grep -q "docker" ${PILLARS_TOP} || echo " - docker" >> ${PILLARS_TOP}
987 "dispatcher" | "keepbalance" | "keepstore")
989 grep -q "arvados.${R}" ${STATES_TOP} || echo " - arvados.${R}" >> ${STATES_TOP}
991 # ATM, no specific pillar needed
994 echo "Unknown role ${R}"
1001 if [ "${DUMP_CONFIG}" = "yes" ]; then
1002 # We won't run the rest of the script because we're just dumping the config
1006 # Now run the install
1007 salt-call --state-output=mixed --local state.apply -l ${LOG_LEVEL}
1009 # Finally, make sure that /etc/hosts is not overwritten on reboot
1010 if [ -d /etc/cloud/cloud.cfg.d ]; then
1011 # TODO: will this work on CentOS?
1012 sed -i 's/^manage_etc_hosts: true/#manage_etc_hosts: true/g' /etc/cloud/cloud.cfg.d/*
1015 # Leave a copy of the Arvados CA so the user can copy it where it's required
1016 if [ "${SSL_MODE}" = "self-signed" ]; then
1017 echo "Copying the Arvados CA certificate '${DOMAIN}-arvados-snakeoil-ca.crt' to the installer dir, so you can import it"
1018 if [ "x${VAGRANT:-}" = "xyes" ]; then
1019 cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${DOMAIN}-arvados-snakeoil-ca.pem
1021 cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${DOMAIN}-arvados-snakeoil-ca.crt
1025 if [ "x${VAGRANT:-}" = "xyes" ]; then
1026 # If running in a vagrant VM, also add default user to docker group
1027 echo "Adding the vagrant user to the docker group"
1028 usermod -a -G docker vagrant
1031 # Test that the installation finished correctly
1032 if [ "x${TEST:-}" = "xyes" ]; then
1034 # If we use RVM, we need to run this with it, or most ruby commands will fail
1036 if [ -x /usr/local/rvm/bin/rvm-exec ]; then
1037 RVM_EXEC="/usr/local/rvm/bin/rvm-exec"
1039 ${RVM_EXEC} ./run-test.sh