rpm_architecture="x86_64"
deb_architecture="amd64"
- if [[ "$pkgtype" =~ ^(python|python3)$ ]]; then
- rpm_architecture="noarch"
- deb_architecture="all"
- fi
-
if [[ "$pkgtype" =~ ^(src)$ ]]; then
rpm_architecture="noarch"
deb_architecture="all"
echo "Package $complete_pkgname exists, not rebuilding!"
curl -o ./${complete_pkgname} ${centos_repo}${complete_pkgname}
return 1
+ elif test -f "$WORKSPACE/packages/$TARGET/processed/${complete_pkgname}" ; then
+ echo "Package $complete_pkgname exists, not rebuilding!"
+ return 1
else
echo "Package $complete_pkgname not found, building"
return 0
return 0
fi
- echo "Building $FORMAT package for $PKG from $PKG_DIR"
cd $WORKSPACE/$PKG_DIR
- # Create an sdist
- echo "Creating sdist..."
-
rm -rf dist/*
- $python setup.py $DASHQ_UNLESS_DEBUG sdist
- if [[ "$?" != "0" ]]; then
+ if ! $python setup.py $DASHQ_UNLESS_DEBUG sdist; then
echo "Error, unable to run python setup.py sdist for $PKG"
exit 1
fi
- # Determine the package version from the generated sdist archive
PACKAGE_PATH=`(cd dist; ls *tar.gz)`
- PYTHON_VERSION=${PACKAGE_PATH#$PKG-}
-
- # For historical reasons, arvados-fuse is called arvados_fuse in python land
- # Same with crunchstat-summary.
- # We should fix this, but for now let's just make this script dtrt.
- PKG_ALTERNATE=${PKG//-/_}
- PYTHON_VERSION=${PYTHON_VERSION#$PKG_ALTERNATE-}
-
- # An even more complicated exception
- if [[ "$PKG" == "libpam-arvados" ]]; then
- PYTHON_VERSION=${PYTHON_VERSION#arvados-pam-}
- fi
- if [[ "$PACKAGE_PATH" == "$PYTHON_VERSION" ]]; then
- echo "Error, unable to determine python package version for $PKG from $PACKAGE_PATH"
- exit 1
- fi
- PYTHON_VERSION=${PYTHON_VERSION%.tar.gz}
+ # Determine the package version from the generated sdist archive
+ PYTHON_VERSION=${ARVADOS_BUILDING_VERSION:-$(awk '($1 == "Version:"){print $2}' *.egg-info/PKG-INFO)}
# See if we actually need to build this package; does it exist already?
# We can't do this earlier than here, because we need PYTHON_VERSION...
# This isn't so bad; the sdist call above is pretty quick compared to
# the invocation of virtualenv and fpm, below.
- test_package_presence "$PYTHON_PKG" $PYTHON_VERSION $PACKAGE_TYPE $ARVADOS_BUILDING_ITERATION amd64
- if [[ "$?" != "0" ]]; then
- echo "exists"
+ if ! test_package_presence "$PYTHON_PKG" $PYTHON_VERSION $PACKAGE_TYPE $ARVADOS_BUILDING_ITERATION; then
return 0
fi
+ echo "Building $FORMAT package for $PKG from $PKG_DIR"
+
# Package the sdist in a virtualenv
echo "Creating virtualenv..."
virtualenv_command="virtualenv --python `which $python` $DASHQ_UNLESS_DEBUG build/usr/share/$python/dist/$PYTHON_PKG"
- $virtualenv_command
-
- if [[ "$?" != "0" ]]; then
+ if ! $virtualenv_command; then
echo "Error, unable to run"
echo " $virtualenv_command"
exit 1
fi
- build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG -U pip
- build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG -U wheel
+ if ! build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG -U pip; then
+ echo "Error, unable to upgrade pip with"
+ echo " build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG -U pip"
+ exit 1
+ fi
+ if ! build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG -U wheel; then
+ echo "Error, unable to upgrade wheel with"
+ echo " build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG -U wheel"
+ exit 1
+ fi
if [[ "$TARGET" != "centos7" ]] || [[ "$PYTHON_PKG" != "python-arvados-fuse" ]]; then
build/usr/share/$python/dist/$PYTHON_PKG/bin/pip install $DASHQ_UNLESS_DEBUG $CACHE_FLAG $PACKAGE_PATH
# virtualenv_tools.py script that doesn't work in python3 without serious
# patching, minus the parts we don't need (modifying pyc files, etc).
for binfile in `ls bin/`; do
- file --mime bin/$binfile |grep -q binary
- if [[ "$?" != "0" ]]; then
+ if ! file --mime bin/$binfile |grep -q binary; then
# Not a binary file
if [[ "$binfile" =~ ^activate(.csh|.fish|)$ ]]; then
# these 'activate' scripts need special treatment
sed -i "s/VIRTUAL_ENV=\".*\"/VIRTUAL_ENV=\"\/usr\/share\/$python\/dist\/$PYTHON_PKG\"/" bin/$binfile
sed -i "s/VIRTUAL_ENV \".*\"/VIRTUAL_ENV \"\/usr\/share\/$python\/dist\/$PYTHON_PKG\"/" bin/$binfile
else
- grep -q -E '^#!.*/bin/python\d?' bin/$binfile
- if [[ "$?" == "0" ]]; then
+ if grep -q -E '^#!.*/bin/python\d?' bin/$binfile; then
# Replace shebang line
sed -i "1 s/^.*$/#!\/usr\/share\/$python\/dist\/$PYTHON_PKG\/bin\/python/" bin/$binfile
fi
cd - >$STDOUT_IF_DEBUG
- find build -iname *.pyc -exec rm {} \;
- find build -iname *.pyo -exec rm {} \;
+ find build -iname '*.pyc' -exec rm {} \;
+ find build -iname '*.pyo' -exec rm {} \;
# Finally, generate the package
echo "Creating package..."
fi
fi
- if [[ "${DEBUG:-0}" != "0" ]]; then
+ if [[ "$DEBUG" != "0" ]]; then
COMMAND_ARR+=('--verbose' '--log' 'info')
fi
COMMAND_ARR+=('-v' "$PYTHON_VERSION")
COMMAND_ARR+=('--iteration' "$ARVADOS_BUILDING_ITERATION")
COMMAND_ARR+=('-n' "$PYTHON_PKG")
- COMMAND_ARR+=('--before-remove' "$WORKSPACE/build/python-package-scripts/before-remove-$PKG.tmp.sh")
- COMMAND_ARR+=('--after-install' "$WORKSPACE/build/python-package-scripts/after-install-$PKG.tmp.sh")
COMMAND_ARR+=('-C' "build")
+ if [[ -e "$WORKSPACE/$PKG_DIR/$PKG.service" ]]; then
+ COMMAND_ARR+=('--after-install' "${WORKSPACE}/build/go-python-package-scripts/postinst")
+ COMMAND_ARR+=('--before-remove' "${WORKSPACE}/build/go-python-package-scripts/prerm")
+ fi
+
if [[ "$python" == "python2.7" ]]; then
COMMAND_ARR+=('--depends' "$PYTHON2_PACKAGE")
else
fpminfo="$WORKSPACE/$PKG_DIR/fpm-info.sh"
if [[ -e "$fpminfo" ]]; then
echo "Loading fpm overrides from $fpminfo"
- source "$fpminfo"
- if [[ "$?" != "0" ]]; then
+ if ! source "$fpminfo"; then
echo "Error, unable to source $WORKSPACE/$PKG_DIR/fpm-info.sh for $PKG"
exit 1
fi
fi
- if [[ -e "$WORKSPACE/$PKG_DIR/bin" ]]; then
- FPM_BINARIES=""
- for binary in `ls $WORKSPACE/$PKG_DIR/bin`; do
- FPM_BINARIES+="'$binary' "
- done
- fi
-
- # create a custom version of the package scripts, with fpm_binaries populated
- cp -f $WORKSPACE/build/python-package-scripts/before-remove.sh $WORKSPACE/build/python-package-scripts/before-remove-$PKG.tmp.sh
- cp -f $WORKSPACE/build/python-package-scripts/after-install.sh $WORKSPACE/build/python-package-scripts/after-install-$PKG.tmp.sh
- sed -i s/%FPM_BINARIES/"$FPM_BINARIES"/g $WORKSPACE/build/python-package-scripts/before-remove-$PKG.tmp.sh
- sed -i s/%FPM_BINARIES/"$FPM_BINARIES"/g $WORKSPACE/build/python-package-scripts/after-install-$PKG.tmp.sh
-
- # Make sure the package scripts know the correct path where its files are installed
- sed -i s/%PYTHON/$python/g $WORKSPACE/build/python-package-scripts/before-remove-$PKG.tmp.sh
- sed -i s/%PYTHON/$python/g $WORKSPACE/build/python-package-scripts/after-install-$PKG.tmp.sh
-
for i in "${fpm_depends[@]}"; do
COMMAND_ARR+=('--depends' "$i")
done
COMMAND_ARR+=("${fpm_args[@]}")
+ # Make sure to install all our package binaries in /usr/local/bin.
+ # We have to walk $WORKSPACE/$PKG_DIR/bin rather than
+ # $WORKSPACE/build/usr/share/$python/dist/$PYTHON_PKG/bin/ to get the list
+ # because the latter also includes all the python binaries for the virtualenv.
+ # We have to take the copies of our binaries from the latter directory, though,
+ # because those are the ones we rewrote the shebang line of, above.
+ if [[ -e "$WORKSPACE/$PKG_DIR/bin" ]]; then
+ for binary in `ls $WORKSPACE/$PKG_DIR/bin`; do
+ COMMAND_ARR+=("usr/share/$python/dist/$PYTHON_PKG/bin/$binary=/usr/local/bin/")
+ done
+ fi
+
COMMAND_ARR+=(".")
FPM_RESULTS=$("${COMMAND_ARR[@]}")
FPM_EXIT_CODE=$?
- fpm_verify $FPM_EXIT_CODE $FPM_RESULTS
-
# if something went wrong and debug is off, print out the fpm command that errored
- if [[ 0 -ne $? ]] && [[ "$STDOUT_IF_DEBUG" == "/dev/null" ]]; then
- echo "fpm returned an error execurin the command:"
+ if ! fpm_verify $FPM_EXIT_CODE $FPM_RESULTS && [[ "$STDOUT_IF_DEBUG" == "/dev/null" ]]; then
+ echo "fpm returned an error executing the command:"
echo
echo -e "\n${COMMAND_ARR[@]}\n"
else
mv $WORKSPACE/$PKG_DIR/dist/*$FORMAT $WORKSPACE/packages/$TARGET/
fi
echo
-
- # clean up
- rm -f $WORKSPACE/build/python-package-scripts/before-remove-$PKG.tmp.sh
- rm -f $WORKSPACE/build/python-package-scripts/after-install-$PKG.tmp.sh
}
# Build packages for everything
# 12271 - As FPM-generated packages don't include scripts by default, the
# packages cleanup on upgrade depends on files being listed on the %files
# section in the generated SPEC files. To remove DIRECTORIES, they need to
- # be listed in that sectiontoo, so we need to add this parameter to properly
+ # be listed in that section too, so we need to add this parameter to properly
# remove lingering dirs. But this only works for python2: if used on
# python33, it includes dirs like /opt/rh/python33 that belong to
# other packages.
COMMAND_ARR+=('--rpm-auto-add-directories')
fi
- if [[ "${DEBUG:-0}" != "0" ]]; then
+ if [[ "$DEBUG" != "0" ]]; then
COMMAND_ARR+=('--verbose' '--log' 'info')
fi