X-Git-Url: https://git.arvados.org/arvados.git/blobdiff_plain/52e3c2cd8b49cf441690778182e11a20002fde52..a86028d71e9560db5055e4fb8741b65675c9fe4b:/tools/salt-install/provision.sh

diff --git a/tools/salt-install/provision.sh b/tools/salt-install/provision.sh
index 07bc63c11d..3c5fb41e0f 100755
--- a/tools/salt-install/provision.sh
+++ b/tools/salt-install/provision.sh
@@ -12,6 +12,17 @@
 
 set -o pipefail
 
+_exit_handler() {
+  local rc="$?"
+  trap - EXIT
+  if [ "$rc" -ne 0 ]; then
+    echo "Error occurred ($rc) while running $0 at line $1 : $BASH_COMMAND"
+  fi
+  exit "$rc"
+}
+
+trap '_exit_handler $LINENO' EXIT ERR
+
 # capture the directory that the script is running from
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
 
@@ -41,13 +52,13 @@ usage() {
   echo >&2 "  -h, --help                                  Display this help and exit"
   echo >&2 "  --dump-config <dest_dir>                    Dumps the pillars and states to a directory"
   echo >&2 "                                              This parameter does not perform any installation at all. It's"
-  echo >&2 "                                              intended to give you a parsed sot of configuration files so"
+  echo >&2 "                                              intended to give you a parsed set of configuration files so"
   echo >&2 "                                              you can inspect them or use them in you Saltstack infrastructure."
   echo >&2 "                                              It"
   echo >&2 "                                                - parses the pillar and states templates,"
   echo >&2 "                                                - downloads the helper formulas with their desired versions,"
   echo >&2 "                                                - prepares the 'top.sls' files both for pillars and states"
-  echo >&2 "                                                  for the selected role/s"
+  echo >&2 "                                                  for the selected role(s)"
   echo >&2 "                                                - writes the resulting files into <dest_dir>"
   echo >&2 "  -v, --vagrant                               Run in vagrant and use the /vagrant shared dir"
   echo >&2 "  --development                               Run in dev mode, using snakeoil certs"
@@ -189,7 +200,7 @@ WORKBENCH2_EXT_SSL_PORT=3001
 
 SSL_MODE="self-signed"
 USE_LETSENCRYPT_ROUTE53="no"
-CUSTOM_CERTS_DIR="${SCRIPT_DIR}/certs"
+CUSTOM_CERTS_DIR="${SCRIPT_DIR}/local_config_dir/certs"
 
 ## These are ARVADOS-related parameters
 # For a stable release, change RELEASE "production" and VERSION to the
@@ -251,7 +262,7 @@ if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
 fi
 
 if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
-  echo >&2 "ERROR: <CLUSTER> must be exactly 5 alphanumeric characters long"
+  echo >&2 "ERROR: <CLUSTER> must be exactly 5 lowercase alphanumeric characters long"
   echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
   exit 1
 fi
@@ -263,7 +274,7 @@ if [ ! -z "${HOSTNAME_EXT}" ] ; then
   # Make sure that the value configured as IP_INT is a real IP on the system.
   # If we don't error out early here when there is a mismatch, the formula will
   # fail with hard to interpret nginx errors later on.
-  ip addr list |grep -q "${IP_INT}/"
+  ip addr list |grep "${IP_INT}/" >/dev/null
   if [[ $? -ne 0 ]]; then
     echo "Unable to find the IP_INT address '${IP_INT}' on the system, please correct the value in local.params. Exiting..."
     exit 1
@@ -291,7 +302,10 @@ else
       yum install -y  curl git jq
       ;;
     "debian"|"ubuntu")
-      DEBIAN_FRONTEND=noninteractive apt update
+      # Wait 2 minutes for any apt locks to clear
+      # This option is supported from apt 1.9.1 and ignored in older apt versions.
+      # Cf. https://blog.sinjakli.co.uk/2021/10/25/waiting-for-apt-locks-without-the-hacky-bash-scripts/
+      DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
       DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
       ;;
   esac
@@ -350,9 +364,9 @@ echo "...arvados"
 git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
 
 # If we want to try a specific branch of the formula
-if [ "x${BRANCH}" != "x" ]; then
+if [ "x${BRANCH}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${BRANCH}" ]; then
   ( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
-elif [ "x${ARVADOS_TAG}" != "x" ]; then
+elif [ "x${ARVADOS_TAG}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${ARVADOS_TAG}" ]; then
 ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
 fi
 
@@ -417,30 +431,34 @@ for f in $(ls "${SOURCE_PILLARS_DIR}"/*); do
   "${f}" > "${P_DIR}"/$(basename "${f}")
 done
 
-if [ "x${TEST}" = "xyes" ] && [ ! -d "${SOURCE_TESTS_DIR}" ]; then
-  echo "You requested to run tests, but ${SOURCE_TESTS_DIR} does not exist or is not a directory. Exiting."
-  exit 1
-fi
-mkdir -p ${T_DIR}
-# Replace cluster and domain name in the test files
-for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
-  FILTERS="s#__CLUSTER__#${CLUSTER}#g;
-       s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
-       s#__DOMAIN__#${DOMAIN}#g;
-       s#__IP_INT__#${IP_INT}#g;
-       s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
-       s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
-       s#__INITIAL_USER__#${INITIAL_USER}#g;
-       s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
-       s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
-  if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
-    FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
-       $FILTERS"
+if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
+  echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
+  if [ "x${TEST}" = "xyes" ]; then
+    echo "WARNING: Disabling tests for this installation."
   fi
-  sed "$FILTERS" \
-    "${f}" > ${T_DIR}/$(basename "${f}")
-done
-chmod 755 ${T_DIR}/run-test.sh
+  TEST="no"
+else
+  mkdir -p ${T_DIR}
+  # Replace cluster and domain name in the test files
+  for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
+    FILTERS="s#__CLUSTER__#${CLUSTER}#g;
+         s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+         s#__DOMAIN__#${DOMAIN}#g;
+         s#__IP_INT__#${IP_INT}#g;
+         s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+         s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
+         s#__INITIAL_USER__#${INITIAL_USER}#g;
+         s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+         s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
+    if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
+      FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
+         $FILTERS"
+    fi
+    sed "$FILTERS" \
+      "${f}" > ${T_DIR}/$(basename "${f}")
+  done
+  chmod 755 ${T_DIR}/run-test.sh
+fi
 
 # Replace helper state files that differ from the formula's examples
 if [ -d "${SOURCE_STATES_DIR}" ]; then
@@ -514,7 +532,7 @@ if [ -d "${F_DIR}"/extra/extra ]; then
     # Same when using self-signed certificates.
     SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
   fi
-  for f in $(ls "${F_DIR}"/extra/extra/*.sls | grep -v ${SKIP_SNAKE_OIL}); do
+  for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
   echo "    - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
   done
   # Use byo or self-signed certificates
@@ -534,19 +552,23 @@ if [ -z "${ROLES}" ]; then
     fi
     grep -q "letsencrypt"     ${S_DIR}/top.sls || echo "    - letsencrypt" >> ${S_DIR}/top.sls
   else
-    # Use custom certs, as both bring-your-own and self-signed are copied using this state
-    # Copy certs to formula extra/files
-    # In dev mode, the files will be created and put in the destination directory by the
-    # snakeoil_certs.sls state file
     mkdir -p /srv/salt/certs
-    cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
-    # We add the custom_certs state
-    grep -q "custom_certs"    ${S_DIR}/top.sls || echo "    - extra.custom_certs" >> ${S_DIR}/top.sls
+    if [ "${SSL_MODE}" = "bring-your-own" ]; then
+      # Copy certs to formula extra/files
+      cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
+      # We add the custom_certs state
+      grep -q "custom_certs"    ${S_DIR}/top.sls || echo "    - extra.custom_certs" >> ${S_DIR}/top.sls
+    fi
+    # In self-signed mode, the certificate files will be created and put in the
+    # destination directory by the snakeoil_certs.sls state file
   fi
 
   echo "    - postgres" >> ${S_DIR}/top.sls
   echo "    - docker.software" >> ${S_DIR}/top.sls
   echo "    - arvados" >> ${S_DIR}/top.sls
+  echo "    - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+  echo "    - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
+  echo "    - extra.passenger_rvm" >> ${S_DIR}/top.sls
 
   # Pillars
   echo "    - docker" >> ${P_DIR}/top.sls
@@ -571,11 +593,27 @@ if [ -z "${ROLES}" ]; then
     fi
     grep -q "letsencrypt" ${P_DIR}/top.sls || echo "    - letsencrypt" >> ${P_DIR}/top.sls
 
-    # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
-    for c in controller websocket workbench workbench2 webshell download collections keepproxy; do
-      sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${c}.${CLUSTER}.${DOMAIN}*/g;
-              s#__CERT_PEM__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
-              s#__CERT_KEY__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+    hosts=("controller" "websocket" "workbench" "workbench2" "webshell" "keepproxy")
+    if [ ${USE_SINGLE_HOSTNAME} = "no" ]; then
+      hosts+=("download" "collections")
+    else
+      hosts+=("keepweb")
+    fi
+
+    for c in "${hosts[@]}"; do
+      # Are we in a single-host-single-hostname env?
+      if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
+        # Are we in a single-host-single-hostname env?
+        CERT_NAME=${HOSTNAME_EXT}
+      else
+        # We are in a multiple-hostnames env
+        CERT_NAME=${c}.${CLUSTER}.${DOMAIN}
+      fi
+
+      # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
+      sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${CERT_NAME}*/g;
+              s#__CERT_PEM__#/etc/letsencrypt/live/${CERT_NAME}/fullchain.pem#g;
+              s#__CERT_KEY__#/etc/letsencrypt/live/${CERT_NAME}/privkey.pem#g" \
       ${P_DIR}/nginx_${c}_configuration.sls
     done
   else
@@ -639,6 +677,7 @@ else
         else
           echo "    - nginx.passenger" >> ${S_DIR}/top.sls
         fi
+        echo "    - extra.passenger_rvm" >> ${S_DIR}/top.sls
         ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
         ### after it. So we add this here as we are, after all, sharing the host for api and controller
         if [ "${SSL_MODE}" = "lets-encrypt" ]; then
@@ -665,6 +704,7 @@ else
         sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
       ;;
       "controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
+        NGINX_INSTALL_SOURCE="install_from_repo"
         # States
         if [ "${R}" = "workbench" ]; then
           NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
@@ -745,7 +785,7 @@ else
                     s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
                     s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
             ${P_DIR}/nginx_${R}_configuration.sls
-            grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo "  - ${R}" >> ${P_DIR}/extra_custom_certs.sls
+            grep -q ${R}$ ${P_DIR}/extra_custom_certs.sls || echo "  - ${R}" >> ${P_DIR}/extra_custom_certs.sls
           fi
         fi
         # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
@@ -753,6 +793,8 @@ else
       ;;
       "shell")
         # States
+        echo "    - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+        echo "    - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
         grep -q "docker" ${S_DIR}/top.sls       || echo "    - docker.software" >> ${S_DIR}/top.sls
         grep -q "arvados.${R}" ${S_DIR}/top.sls || echo "    - arvados.${R}" >> ${S_DIR}/top.sls
         # Pillars
@@ -777,19 +819,6 @@ if [ "${DUMP_CONFIG}" = "yes" ]; then
   exit 0
 fi
 
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ -e /root/.psqlrc ]; then
-  if ! ( grep 'pset pager off' /root/.psqlrc ); then
-    RESTORE_PSQL="yes"
-    cp /root/.psqlrc /root/.psqlrc.provision.backup
-  fi
-else
-  DELETE_PSQL="yes"
-fi
-
-echo '\pset pager off' >> /root/.psqlrc
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
-
 # Now run the install
 salt-call --local state.apply -l ${LOG_LEVEL}
 
@@ -799,29 +828,19 @@ if [ -d /etc/cloud/cloud.cfg.d ]; then
   sed -i 's/^manage_etc_hosts: true/#manage_etc_hosts: true/g' /etc/cloud/cloud.cfg.d/*
 fi
 
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ "x${DELETE_PSQL}" = "xyes" ]; then
-  echo "Removing .psql file"
-  rm /root/.psqlrc
-fi
-
-if [ "x${RESTORE_PSQL}" = "xyes" ]; then
-  echo "Restoring .psql file"
-  mv -v /root/.psqlrc.provision.backup /root/.psqlrc
-fi
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
-
 # Leave a copy of the Arvados CA so the user can copy it where it's required
 if [ "$DEV_MODE" = "yes" ]; then
-  echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
+  ARVADOS_SNAKEOIL_CA_DEST_FILE="${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
+
   # If running in a vagrant VM, also add default user to docker group
   if [ "x${VAGRANT}" = "xyes" ]; then
-    cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
-
     echo "Adding the vagrant user to the docker group"
     usermod -a -G docker vagrant
-  else
-    cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
+    ARVADOS_SNAKEOIL_CA_DEST_FILE="/vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
+  fi
+  if [ -f /etc/ssl/certs/arvados-snakeoil-ca.pem ]; then
+    echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
+    cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${ARVADOS_SNAKEOIL_CA_DEST_FILE}
   fi
 fi