X-Git-Url: https://git.arvados.org/arvados.git/blobdiff_plain/45ab2f46c34ab5336768d095c0232f24efb6e04d..f7878b7f8780cb2e17078486b2239661be6aeedc:/jenkins/run-tests.sh

diff --git a/jenkins/run-tests.sh b/jenkins/run-tests.sh
index bee8002864..4724cfa8c9 100755
--- a/jenkins/run-tests.sh
+++ b/jenkins/run-tests.sh
@@ -1,193 +1,370 @@
 #!/bin/bash
 
-EXITCODE=0
+# Install and test Arvados components.
+#
+# Exit non-zero if any tests fail.
+#
+# Arguments:
+# --skip FOO     Do not test the FOO component.
+# --only FOO     Do not test anything except the FOO component.
+# envvar=value   Set $envvar to value
+#
+# Regardless of which components are tested, install all components in
+# the usual sequence. (Many test suites depend on other components
+# being installed.)
+#
+# To run a specific Ruby test, set $workbench_test, $apiserver_test or
+# $cli_test on the command line:
+#
+# $ run-tests.sh --only workbench workbench_test=TEST=test/integration/pipeline_instances_test.rb
+#
+#
+# To run a specific Python test set $python_sdk_test or $fuse_test.
+#
+# $ run-tests.sh --only python_sdk python_sdk_test="--test-suite tests.test_keep_locator"
+#
+#
+# You can also pass "export ARVADOS_DEBUG=1" to enable additional debugging output:
+#
+# $ run-tests.sh "export ARVADOS_DEBUG=1"
+#
+#
+# Finally, you can skip the installation steps on subsequent runs this way:
+#
+## First run
+# $ run-tests.sh --leave-temp
+#
+## Subsequent runs: record the values of VENVDIR and GOPATH from the first run, and
+# provide them on the command line in subsequent runs:
+#
+# $ run-tests.sh --skip-install VENVDIR="/tmp/tmp.y3tsTmigio" GOPATH="/tmp/tmp.3r4sSA9F3l"
+
+
+# First make sure to remove any ARVADOS_ variables from the calling environment
+# that could interfer with the tests.
+unset $(env | cut -d= -f1 | grep \^ARVADOS_)
 
 COLUMNS=80
 
-ARVADOS_API_HOST=qr1hi.arvadosapi.com
-
-title () {
-  printf "\n%*s\n\n" $(((${#title}+$COLUMNS)/2)) "********** $1 **********"
+export GOPATH=$(mktemp -d)
+VENVDIR=$(mktemp -d)
+cli_test=
+workbench_test=
+apiserver_test=
+python_sdk_test=
+ruby_sdk_test=
+fuse_test=
+leave_temp=
+skip_install=
+
+if [[ -f /etc/profile.d/rvm.sh ]]
+then
+    source /etc/profile.d/rvm.sh
+fi
+
+fatal() {
+    clear_temp
+    echo >&2 "Fatal: $* in ${FUNCNAME[1]} at ${BASH_SOURCE[1]} line ${BASH_LINENO[0]}"
+    exit 1
 }
 
-source /etc/profile.d/rvm.sh
-echo $WORKSPACE
+# Sanity check
+echo "WORKSPACE=$WORKSPACE"
+[[ -n "$WORKSPACE" ]] || fatal "WORKSPACE not set"
 
-export GOPATH=$(mktemp -d)
+# Set up temporary install dirs
 mkdir -p "$GOPATH/src/git.curoverse.com"
-ln -sfn "$WORKSPACE" "$GOPATH/src/git.curoverse.com/arvados.git"
+ln -sfn "$WORKSPACE" "$GOPATH/src/git.curoverse.com/arvados.git" \
+    || fatal "symlink failed"
 
-# DOCS
-title "Starting DOC build"
-cd "$WORKSPACE"
-cd doc
-bundle install --deployment
-rm -rf .site
-# Make sure python-epydoc is installed or the next line won't do much good!
-PYTHONPATH=$WORKSPACE/sdk/python/ bundle exec rake generate baseurl=file://$WORKSPACE/doc/.site/ arvados_workbench_host=workbench.$ARVADOS_API_HOST arvados_api_host=$ARVADOS_API_HOST
+virtualenv --setuptools "$VENVDIR" || fatal "virtualenv $VENVDIR failed"
+PATH="$VENVDIR/bin:$PATH"
 
-checkexit() {
-    ECODE=$?
+declare -a failures
+declare -A skip
 
-    if [[ "$ECODE" != "0" ]]; then
+# Always skip CLI tests. They don't know how to use run_test_server.py.
+skip[cli]=1
+
+while [[ -n "$1" ]]
+do
+    arg="$1"; shift
+    case "$arg" in
+        --skip)
+            skipwhat="$1"; shift
+            skip[$skipwhat]=1
+            ;;
+        --only)
+            only="$1"; shift
+            ;;
+        --skip-install)
+            skip_install=1
+            ;;
+        --leave-temp)
+            leave_temp=1
+            ;;
+        *=*)
+            eval $(echo $arg | cut -d= -f1)=\"$(echo $arg | cut -d= -f2-)\"
+            ;;
+        *)
+            echo >&2 "$0: Unrecognized option: '$arg'"
+            exit 1
+            ;;
+    esac
+done
+
+checkexit() {
+    if [[ "$?" != "0" ]]; then
         title "!!!!!! $1 FAILED !!!!!!"
-        EXITCODE=$(($EXITCODE + $ECODE))
+        failures+=("$1 (`timer`)")
+    else
+        successes+=("$1 (`timer`)")
     fi
 }
 
-checkexit "Doc build"
-title "DOC build complete"
-
-# DOC linkchecker
-title "Starting DOC linkchecker"
-cd "$WORKSPACE"
-cd doc
-bundle exec rake linkchecker baseurl=file://$WORKSPACE/doc/.site/
-
-checkexit "Doc linkchecker"
-title "DOC linkchecker complete"
-
-# API SERVER
-title "Starting API server tests"
-cd "$WORKSPACE"
-cd services/api
-bundle install --deployment
-
-rm -f config/database.yml
-rm -f config/environments/test.rb
-cp config/environments/test.rb.example config/environments/test.rb
-
-# Get test database config
-cp $HOME/arvados-api-server/database.yml config/
-# Get test application.yml file
-cp $HOME/arvados-api-server/application.yml config/
-
-# Fill in a random secret_token and blob_signing_key for testing
-SECRET_TOKEN=`echo 'puts rand(2**512).to_s(36)' |ruby`
-BLOB_SIGNING_KEY=`echo 'puts rand(2**512).to_s(36)' |ruby`
-
-sed -i'' -e "s:SECRET_TOKEN:$SECRET_TOKEN:" config/application.yml
-sed -i'' -e "s:BLOB_SIGNING_KEY:$BLOB_SIGNING_KEY:" config/application.yml
-
-export RAILS_ENV=test
-
-# Set up empty git repo (for git tests)
-GITDIR=$WORKSPACE/tmpgit
-rm -rf $GITDIR
-mkdir $GITDIR
-sed -i'' -e "s:/var/cache/git:$GITDIR:" config/application.default.yml
-
-rm -rf $GITDIR
-mkdir -p $GITDIR/test
-cd $GITDIR/test
-/usr/bin/git init
-/usr/bin/git config user.email "jenkins@ci.curoverse.com"
-/usr/bin/git config user.name "Jenkins, CI"
-touch tmp
-/usr/bin/git add tmp
-/usr/bin/git commit -m 'initial commit'
-
-cd "$WORKSPACE"
-cd services/api
-
-bundle exec rake db:drop
-bundle exec rake db:create
-bundle exec rake db:setup
-bundle exec rake test
-
-checkexit "API server tests"
-title "API server tests complete"
-
-# Install and test Go bits. keepstore must come before keepproxy and keepclient.
-for dir in services/keepstore services/keepproxy sdk/go/arvadosclient sdk/go/keepclient sdk/go/streamer
-do
-  title "Starting $dir tests"
-  cd "$WORKSPACE"
+timer_reset() {
+    t0=$SECONDS
+}
 
-  go get -t "git.curoverse.com/arvados.git/$dir" \
-  && go test "git.curoverse.com/arvados.git/$dir"
+timer() {
+    echo -n "$(($SECONDS - $t0))s"
+}
 
-  checkexit "$dir tests"
-  title "$dir tests complete"
-done
+do_test() {
+    if [[ -z "${skip[$1]}" ]] && ( [[ -z "$only" ]] || [[ "$only" == "$1" ]] )
+    then
+        title "Running $1 tests"
+        timer_reset
+        if [[ "$2" == "go" ]]
+        then
+            go test "git.curoverse.com/arvados.git/$1"
+        else
+            "test_$1"
+        fi
+        checkexit "$1 tests"
+        title "End of $1 tests (`timer`)"
+    else
+        title "Skipping $1 tests"
+    fi
+}
 
+do_install() {
+    if [[ -z "$skip_install" ]]
+    then
+        title "Running $1 install"
+        timer_reset
+        if [[ "$2" == "go" ]]
+        then
+            go get -t "git.curoverse.com/arvados.git/$1"
+        else
+            "install_$1"
+        fi
+        checkexit "$1 install"
+        title "End of $1 install (`timer`)"
+    else
+        title "Skipping $1 install"
+    fi
+}
 
-# WORKBENCH
-title "Starting workbench tests"
-cd "$WORKSPACE"
-cd apps/workbench
-bundle install --deployment
+title () {
+    txt="********** $1 **********"
+    printf "\n%*s%s\n\n" $((($COLUMNS-${#txt})/2)) "" "$txt"
+}
 
-echo $PATH
+clear_temp() {
+    if [[ -z "$leave_temp" ]]
+    then
+        for t in "$VENVDIR" "$GOPATH"
+        do
+            if [[ -n "$t" ]]
+            then
+                rm -rf "$t"
+            fi
+        done
+    else
+        echo "Leaving VENVDIR=\"$VENVDIR\""
+        echo "Leaving GOPATH=\"$GOPATH\""
+    fi
+}
 
+test_docs() {
+    cd "$WORKSPACE/doc"
+    bundle install --no-deployment
+    rm -rf .site
+    # Make sure python-epydoc is installed or the next line won't do much good!
+    ARVADOS_API_HOST=qr1hi.arvadosapi.com
+    PYTHONPATH=$WORKSPACE/sdk/python/ bundle exec rake generate baseurl=file://$WORKSPACE/doc/.site/ arvados_workbench_host=workbench.$ARVADOS_API_HOST arvados_api_host=$ARVADOS_API_HOST
+    unset ARVADOS_API_HOST
+}
+do_test docs
 
-bundle exec rake test
+test_doclinkchecker() {
+    cd "$WORKSPACE/doc"
+    bundle exec rake linkchecker baseurl=file://$WORKSPACE/doc/.site/
+}
+do_test doclinkchecker
 
-checkexit "Workbench tests"
-title "Workbench tests complete"
+test_ruby_sdk() {
+    cd "$WORKSPACE/sdk/ruby" \
+        && bundle install --no-deployment \
+        && bundle exec rake test
+}
+do_test ruby_sdk
 
-# Python SDK
-title "Starting Python SDK tests"
-cd "$WORKSPACE"
-cd sdk/cli
-bundle install --deployment
+install_ruby_sdk() {
+    cd "$WORKSPACE/sdk/ruby" \
+        && gem build arvados.gemspec \
+        && gem install --no-ri --no-rdoc arvados-*.gem
+}
+do_install ruby_sdk
 
-# Set up Python SDK and dependencies
+install_cli() {
+    cd "$WORKSPACE/sdk/cli" \
+        && gem build arvados-cli.gemspec \
+        && gem install --no-ri --no-rdoc arvados-cli-*.gem
+}
+do_install cli
+
+test_cli() {
+    title "Starting SDK CLI tests"
+    cd "$WORKSPACE/sdk/cli" \
+        && bundle install --no-deployment \
+        && mkdir -p /tmp/keep \
+        && KEEP_LOCAL_STORE=/tmp/keep bundle exec rake test $cli_test
+}
+do_test cli
 
-cd "$WORKSPACE"
-cd sdk/python
+install_apiserver() {
+    cd "$WORKSPACE/services/api"
+    bundle install --no-deployment
 
-VENVDIR=$(mktemp -d)
-virtualenv --setuptools "$VENVDIR"
-"$VENVDIR/bin/python" setup.py test
+    rm -f config/environments/test.rb
+    cp config/environments/test.rb.example config/environments/test.rb
 
-checkexit "Python SDK tests"
+    cp $HOME/arvados-api-server/database.yml config/ || fatal "database.yml"
+    cp $HOME/arvados-api-server/application.yml config/ || fatal "application.yml"
 
-"$VENVDIR/bin/python" setup.py egg_info -b ".$(git log --format=format:%ct.%h -n1 .)" sdist rotate --keep=1 --match .tar.gz
-"$VENVDIR/bin/pip" install dist/arvados-python-client-0.1.*.tar.gz
+    # Fill in a random secret_token and blob_signing_key for testing
+    SECRET_TOKEN=`echo 'puts rand(2**512).to_s(36)' |ruby`
+    BLOB_SIGNING_KEY=`echo 'puts rand(2**512).to_s(36)' |ruby`
 
-checkexit "Python SDK install"
+    sed -i'' -e "s:SECRET_TOKEN:$SECRET_TOKEN:" config/application.yml
+    sed -i'' -e "s:BLOB_SIGNING_KEY:$BLOB_SIGNING_KEY:" config/application.yml
 
-cd "$WORKSPACE"
-cd services/fuse
+    export RAILS_ENV=test
 
-# We reuse $VENVDIR from the Python SDK tests above
-"$VENVDIR/bin/python" setup.py test
+    # Set up empty git repo (for git tests)
+    GITDIR="$WORKSPACE/tmpgit"
+    sed -i'' -e "s:/var/cache/git:$GITDIR:" config/application.default.yml
 
-checkexit "FUSE tests"
+    rm -rf $GITDIR
+    mkdir -p $GITDIR/test
+    cd $GITDIR/test \
+        && git init \
+        && git config user.email "jenkins@ci.curoverse.com" \
+        && git config user.name "Jenkins, CI" \
+        && touch tmp \
+        && git add tmp \
+        && git commit -m 'initial commit'
 
-"$VENVDIR/bin/python" setup.py egg_info -b ".$(git log --format=format:%ct.%h -n1 .)" sdist rotate --keep=1 --match .tar.gz
-"$VENVDIR/bin/pip" install dist/arvados_fuse-0.1.*.tar.gz
+    cd "$WORKSPACE/services/api" \
+        && bundle exec rake db:drop \
+        && bundle exec rake db:create \
+        && bundle exec rake db:setup
+}
+do_install apiserver
 
-checkexit "FUSE install"
+test_apiserver() {
+    cd "$WORKSPACE/services/api"
+    bundle exec rake test $apiserver_test
+}
+do_test apiserver
+
+declare -a gostuff
+gostuff=(
+    services/keepstore
+    services/keepproxy
+    sdk/go/arvadosclient
+    sdk/go/keepclient
+    sdk/go/streamer
+    )
+for g in "${gostuff[@]}"
+do
+    do_install "$g" go
+done
 
-title "Python SDK tests complete"
+install_python_sdk() {
+    # Install the Python SDK early. Various other test suites (like
+    # keepproxy) bring up run_test_server.py, which imports the arvados
+    # module. We can't actually *test* the Python SDK yet though, because
+    # its own test suite brings up some of those other programs (like
+    # keepproxy).
 
-# Clean up $VENVDIR
-rm -rf "$VENVDIR"
+    cd "$WORKSPACE/sdk/python" \
+        && python setup.py egg_info -b ".$(git log --format=format:%ct.%h -n1 .)" sdist rotate --keep=1 --match .tar.gz \
+        && pip install dist/arvados-python-client-0.1.*.tar.gz
+}
+do_install python_sdk
 
-# The CLI SDK tests require a working API server, so let's skip those for now.
-exit $EXITCODE
+install_fuse() {
+    cd "$WORKSPACE/services/fuse" \
+        && python setup.py egg_info -b ".$(git log --format=format:%ct.%h -n1 .)" sdist rotate --keep=1 --match .tar.gz \
+        && pip install dist/arvados_fuse-0.1.*.tar.gz
+}
+do_install fuse
+
+test_python_sdk() {
+    # Python SDK. We test this before testing keepproxy: keepproxy runs
+    # run_test_server.py, which depends on the yaml package, which is in
+    # tests_require but not install_requires, and therefore does not get
+    # installed by setuptools until we run "setup.py test" *and* install
+    # the .egg files that setup.py downloads.
+
+    cd "$WORKSPACE/sdk/python" \
+        && python setup.py test $python_sdk_test
+    r=$?
+    easy_install *.egg
+    return $r
+}
+do_test python_sdk
+
+test_fuse() {
+    # Install test dependencies here too, in case run_test_server needs them.
+    cd "$WORKSPACE/services/fuse" \
+        && python setup.py test $fuse_test
+    r=$?
+    easy_install *.egg
+    return $r
+}
+do_test fuse
 
-# CLI SDK
-title "Starting SDK CLI tests"
-cd "$WORKSPACE"
-cd sdk/cli
-bundle install --deployment
+for g in "${gostuff[@]}"
+do
+    do_test "$g" go
+done
 
-# Set up Python SDK and dependencies
-cd ../python
-rm -rf $HOME/lib/python
-mkdir $HOME/lib/python
-PYTHONPATH="$HOME/lib/python" easy_install --install-dir=$HOME/lib/python --upgrade google-api-python-client
-PYTHONPATH="$HOME/lib/python" python setup.py install --home=$HOME
+test_workbench() {
+    cd "$WORKSPACE/apps/workbench" \
+        && bundle install --no-deployment \
+        && bundle exec rake test $workbench_test
+}
+do_test workbench
 
-cd ../cli
-mkdir -p /tmp/keep
-export KEEP_LOCAL_STORE=/tmp/keep
-PYTHONPATH="$HOME/lib/python" bundle exec rake test
+clear_temp
 
-checkexit "SDK CLI tests"
-title "SDK CLI tests complete"
+for x in "${successes[@]}"
+do
+    echo "Pass: $x"
+done
 
-exit $EXITCODE
+if [[ ${#failures[@]} == 0 ]]
+then
+    echo "All test suites passed."
+else
+    echo "Failures (${#failures[@]}):"
+    for x in "${failures[@]}"
+    do
+        echo "Fail: $x"
+    done
+fi
+exit ${#failures}