X-Git-Url: https://git.arvados.org/arvados.git/blobdiff_plain/40103b455d0df2bc47eaba422a72bf6ec4fd6808..faeaccc982ec3fc89263342e26e9bed4b0ee50ed:/doc/install/install-api-server.html.textile.liquid
diff --git a/doc/install/install-api-server.html.textile.liquid b/doc/install/install-api-server.html.textile.liquid
index 91e2c69892..c234bca927 100644
--- a/doc/install/install-api-server.html.textile.liquid
+++ b/doc/install/install-api-server.html.textile.liquid
@@ -3,6 +3,11 @@ layout: default
navsection: installguide
title: Install the API server
...
+{% comment %}
+Copyright (C) The Arvados Authors. All rights reserved.
+
+SPDX-License-Identifier: CC-BY-SA-3.0
+{% endcomment %}
h2. Install prerequisites
@@ -12,10 +17,6 @@ h3(#install_ruby_and_bundler). Install Ruby and Bundler
{% include 'install_ruby_and_bundler' %}
-h3(#install_postgres). Install PostgreSQL
-
-{% include 'install_postgres' %}
-
h2(#install_apiserver). Install API server and dependencies
On a Debian-based system, install the following packages:
@@ -34,127 +35,124 @@ On a Red Hat-based system, install the following packages:
{% include 'install_git' %}
-h2(#configure). Set up the database
-
-Generate a new database password. Nobody ever needs to memorize it or type it, so we'll make a strong one:
-
-
-~$ ruby -e 'puts rand(2**128).to_s(36)'
-6gqa1vu492idd7yca9tfandj3
-
-
-Create a new database user.
+h2(#configure_application). Configure the API server
-
-~$ sudo -u postgres createuser --encrypted -R -S --pwprompt arvados
-[sudo] password for you: yourpassword
-Enter password for new role: paste-password-you-generated
-Enter it again: paste-password-again
-
+Edit @/etc/arvados/config.yml@ to set the keys below. Only the most important configuration options are listed here. The example configuration fragments given below should be merged into a single configuration structure. Correct indentation is important. The full set of configuration options are listed in "config.yml":{{site.baseurl}}/admin/config.html
-{% assign pg_hba_path = "/opt/rh/postgresql92/root/var/lib/pgsql/data/pg_hba.conf" %}
-{% assign pg_service = "postgresql92-postgresql" %}
-{% include 'install_redhat_postgres_auth' %}
+h3(#uuid_prefix). ClusterID
-Create the database:
+The @ClusterID@ is used for all database identifiers to identify the record as originating from this site. It is the first key under @Clusters@ in @config.yml@. It must be exactly 5 lowercase ASCII letters and digits. All configuration items go under the cluster id key (replace @zzzzz@ with your cluster id in the examples below).
-~$ sudo -u postgres createdb arvados_production -T template0 -E UTF8 -O arvados
-
+Clusters:
+ zzzzz:
+ ...
-h2. Configure the database connection
-
-Edit @/etc/arvados/api/database.yml@ and replace the @xxxxxxxx@ database password placeholders with the PostgreSQL password you generated above.
-
-h2(#configure_application). Configure the API server
-
-Edit @/etc/arvados/api/application.yml@ to configure the settings described in the following sections. The API server reads both @application.yml@ and its own @config/application.default.yml@ file. The settings in @application.yml@ take precedence over the defaults that are defined in @config/application.default.yml@. The @config/application.yml.example@ file is not read by the API server and is provided as a starting template only.
-
-@config/application.default.yml@ documents additional configuration settings not listed here. You can "view the current source version":https://dev.arvados.org/projects/arvados/repository/revisions/master/entry/services/api/config/application.default.yml for reference.
-
-Only put local configuration in @application.yml@. Do not edit @application.default.yml@.
-
-h3(#uuid_prefix). uuid_prefix
+h3(#configure). PostgreSQL.Connection
-Define your @uuid_prefix@ in @application.yml@ by setting the @uuid_prefix@ field in the section for your environment. This prefix is used for all database identifiers to identify the record as originating from this site. It must be exactly 5 lowercase ASCII letters and digits.
-
-Example @application.yml@:
+Replace the @xxxxxxxx@ database password placeholder with the "password you generated during database setup":install-postgresql.html#api.
- uuid_prefix: zzzzz
+Clusters:
+ zzzzz:
+ PostgreSQL:
+ Connection:
+ host: localhost
+ user: arvados
+ password: xxxxxxxx
+ dbname: arvados_production
+
-h3. secret_token
+h3. API.RailsSessionSecretToken
-The @secret_token@ is used for for signing cookies. IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @application.yml@:
+The @API.RailsSessionSecretToken@ is used for for signing cookies. IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @config.yml@:
~$ ruby -e 'puts rand(2**400).to_s(36)'
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
-Example @application.yml@:
+Example @config.yml@:
- secret_token: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
+Clusters:
+ zzzzz:
+ API:
+ RailsSessionSecretToken: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
-h3(#blob_signing_key). blob_signing_key
+h3(#blob_signing_key). Collections.BlobSigningKey
-The @blob_signing_key@ is used to enforce access control to Keep blocks. This same key must be provided to the Keepstore daemons when "installing Keepstore servers.":install-keepstore.html IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @application.yml@:
+The @Collections.BlobSigningKey@ is used to enforce access control to Keep blocks. This same key must be provided to the Keepstore daemons when "installing Keepstore servers.":install-keepstore.html IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @config.yml@:
~$ ruby -e 'puts rand(2**400).to_s(36)'
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-Example @application.yml@:
+Example @config.yml@:
- blob_signing_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+Clusters:
+ zzzzz:
+ Collections:
+ BlobSigningKey: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-h3(#omniauth). sso_app_secret, sso_app_id, sso_provider_url
+h3(#omniauth). Login.ProviderAppID, Login.ProviderAppSecret, Services.SSO.ExternalURL
The following settings enable the API server to communicate with the "Single Sign On (SSO) server":install-sso.html to authenticate user log in.
-Set @sso_provider_url@ to the base URL where your SSO server is installed. This should be a URL consisting of the scheme and host (and optionally, port), without a trailing slash.
+Set @Services.SSO.ExternalURL@ to the base URL where your SSO server is installed. This should be a URL consisting of the scheme and host (and optionally, port), without a trailing slash.
-Set @sso_app_secret@ and @sso_app_id@ to the corresponding values for @app_secret@ and @app_id@ used in the "Create arvados-server client for Single Sign On (SSO)":install-sso.html#client step.
+Set @Login.ProviderAppID@ and @Login.ProviderAppSecret@ to the corresponding values for @app_id@ and @app_secret@ used in the "Create arvados-server client for Single Sign On (SSO)":install-sso.html#client step.
-Example @application.yml@:
+Example @config.yml@:
- sso_app_id: arvados-server
- sso_app_secret: wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
- sso_provider_url: https://sso.example.com
-
+Clusters:
+ zzzzz:
+ Services:
+ SSO:
+ ExternalURL: https://sso.example.com
+ Login:
+ ProviderAppID: arvados-server
+ ProviderAppSecret: wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
-h3. workbench_address
+h3. Services.Workbench1.ExternalURL
-Set @workbench_address@ to the URL of your workbench application after following "Install Workbench.":install-workbench-app.html
+Set @Services.Workbench1.ExternalURL@ to the URL of your workbench application after following "Install Workbench.":install-workbench-app.html
-Example @application.yml@:
+Example @config.yml@:
- workbench_address: https://workbench.zzzzz.example.com
+Clusters:
+ zzzzz:
+ Services:
+ Workbench1:
+ ExternalURL: https://workbench.zzzzz.example.com
-h3. websocket_address
+h3. Services.Websocket.ExternalURL
-Set @websocket_address@ to the @wss://@ URL of the API server websocket endpoint after following "Set up Web servers":#set_up. The path of the default endpoint is @/websocket@.
+Set @Services.Websocket.ExternalURL@ to the @wss://@ URL of the API server websocket endpoint after following "Install the websocket server":install-ws.html .
-Example @application.yml@:
+Example @config.yml@:
- websocket_address: wss://ws.zzzzz.example.com/websocket
+Clusters:
+ zzzzz:
+ Services:
+ Websocket:
+ ExternalURL: wss://ws.zzzzz.example.com
-h3(#git_repositories_dir). git_repositories_dir
+h3(#git_repositories_dir). Git.Repositories
-The @git_repositories_dir@ setting specifies the directory where user git repositories will be stored.
+The @Git.Repositories@ setting specifies the directory where user git repositories will be stored.
The git server setup process is covered on "its own page":install-arv-git-httpd.html. For now, create an empty directory in the default location:
@@ -162,66 +160,60 @@ The git server setup process is covered on "its own page":install-arv-git-httpd.
~$ sudo mkdir -p /var/lib/arvados/git/repositories
-If you intend to store your git repositories in a different location, specify that location in @application.yml@.
-
-Default setting in @application.default.yml@:
+If you intend to store your git repositories in a different location, specify that location in @config.yml@. Example:
- git_repositories_dir: /var/lib/arvados/git/repositories
-
+Clusters:
+ zzzzz:
+ Git:
+ Repositories: /var/lib/arvados/git/repositories
-h3(#git_internal_dir). git_internal_dir
+h3(#enable_legacy_jobs_api). Containers.JobsAPI.Enable
-The @git_internal_dir@ setting specifies the location of Arvados' internal git repository. By default this is @/var/lib/arvados/internal.git@. This repository stores git commits that have been used to run Crunch jobs. It should _not_ be a subdirectory of @git_repositories_dir@.
+Enable the legacy "Jobs API":install-crunch-dispatch.html . Note: new installations should use the "Containers API":crunch2-slurm/install-prerequisites.html
-Example @application.yml@:
+Disabling the jobs API means methods involving @jobs@, @job_tasks@, @pipeline_templates@ and @pipeline_instances@ are disabled. This functionality is superceded by the containers API which consists of @container_requests@, @containers@ and @workflows@. Arvados clients (such as @arvados-cwl-runner@) detect which APIs are available and adjust behavior accordingly. Note the configuration value must be a quoted string.
-
- git_internal_dir: /var/lib/arvados/internal.git
-
-
-
-h2(#set_up). Set up Web servers
-
-For best performance, we recommend you use Nginx as your Web server front-end, with a Passenger backend for the main API server and a Puma backend for API server Websockets. To do that:
+* 'auto' -- (default) enable the Jobs API only if it has been used before (i.e., there are job records in the database), otherwise disable jobs API .
+* 'true' -- enable the Jobs API even if there are no existing job records.
+* 'false' -- disable the Jobs API even in the presence of existing job records.
-
-- Install Nginx and Phusion Passenger.
+Clusters:
+ zzzzz:
+ Containers:
+ JobsAPI:
+ Enable: 'auto'
+
-Install runit to supervise the Puma daemon. {% include 'install_runit' %}
+h4(#git_internal_dir). Containers.JobsAPI.GitInternalDir
-Install the script below as the run script for the Puma service, modifying it as directed by the comments.
+Only required if the legacy "Jobs API" is enabled, otherwise you should skip this.
-#!/bin/bash
+The @Containers.JobsAPI.GitInternalDir@ setting specifies the location of Arvados' internal git repository. By default this is @/var/lib/arvados/internal.git@. This repository stores git commits that have been used to run Crunch jobs. It should _not_ be a subdirectory of the directory in @Git.Repositories@.
-set -e
-exec 2>&1
+Example @config.yml@:
-# Uncomment the line below if you're using RVM.
-#source /etc/profile.d/rvm.sh
+
+Clusters:
+ zzzzz:
+ Containers:
+ JobsAPI:
+ GitInternalDir: /var/lib/arvados/internal.git
+
-envdir="`pwd`/env"
-mkdir -p "$envdir"
-echo ws-only > "$envdir/ARVADOS_WEBSOCKETS"
+h2(#set_up). Set up Nginx and Passenger
-cd /var/www/arvados-api/current
-echo "Starting puma in `pwd`"
+The Nginx server will serve API requests using Passenger. It will also be used to proxy SSL requests to other services which are covered later in this guide.
-# Change arguments below to match your deployment, "webserver-user" and
-# "webserver-group" should be changed to the user and group of the web server
-# process. This is typically "www-data:www-data" on Debian systems by default,
-# other systems may use different defaults such the name of the web server
-# software (for example, "nginx:nginx").
-exec chpst -m 1073741824 -u webserver-user:webserver-group -e "$envdir" \
- bundle exec puma -t 0:512 -e production -b tcp://127.0.0.1:8100
-
-
+First, "Install Nginx and Phusion Passenger":https://www.phusionpassenger.com/library/walkthroughs/deploy/ruby/ownserver/nginx/oss/install_passenger_main.html.
-Edit the http section of your Nginx configuration to run the Passenger server, and act as a front-end for both it and Puma. You might add a block like the following, adding SSL and logging parameters to taste:
+Edit the http section of your Nginx configuration to run the Passenger server. Add a block like the following, adding SSL and logging parameters to taste:
-server {
+
+
+server {
listen 127.0.0.1:8000;
server_name localhost-api;
@@ -237,7 +229,7 @@ exec chpst -m 1073741824 -u webserver-user:webserver-group -e "$envdir" \
# also ensure the following settings match it:
# * `client_max_body_size` in the server section below
# * `client_max_body_size` in the Workbench Nginx configuration (twice)
- # * `max_request_size` in the API server's application.yml file
+ # * `API.MaxRequestSize` in config.yml
client_max_body_size 128m;
}
@@ -245,11 +237,6 @@ upstream api {
server 127.0.0.1:8000 fail_timeout=10s;
}
-upstream websockets {
- # The address below must match the one specified in puma's -b option.
- server 127.0.0.1:8100 fail_timeout=10s;
-}
-
proxy_http_version 1.1;
# When Keep clients request a list of Keep services from the API server, the
@@ -261,68 +248,14 @@ geo $external_client {
default 1;
10.20.30.0/24 0;
}
-
-server {
- listen [your public IP address]:443 ssl;
- server_name uuid_prefix.your.domain;
-
- ssl on;
- ssl_certificate /YOUR/PATH/TO/cert.pem;
- ssl_certificate_key /YOUR/PATH/TO/cert.key;
-
- index index.html index.htm index.php;
-
- # Refer to the comment about this setting in the server section above.
- client_max_body_size 128m;
-
- location / {
- proxy_pass http://api;
- proxy_redirect off;
- proxy_connect_timeout 90s;
- proxy_read_timeout 300s;
-
- proxy_set_header X-Forwarded-Proto https;
- proxy_set_header Host $http_host;
- proxy_set_header X-External-Client $external_client;
- proxy_set_header X-Real-IP $remote_addr;
- proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
- }
-}
-
-server {
- listen [your public IP address]:443 ssl;
- server_name ws.uuid_prefix.your.domain;
-
- ssl on;
- ssl_certificate /YOUR/PATH/TO/cert.pem;
- ssl_certificate_key /YOUR/PATH/TO/cert.key;
-
- index index.html index.htm index.php;
-
- location / {
- proxy_pass http://websockets;
- proxy_redirect off;
- proxy_connect_timeout 90s;
- proxy_read_timeout 300s;
-
- proxy_set_header Upgrade $http_upgrade;
- proxy_set_header Connection "upgrade";
- proxy_set_header Host $host;
- proxy_set_header X-Real-IP $remote_addr;
- proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
- }
-}
-
+
-Restart Nginx:
+Restart Nginx to apply the new configuration.
+
~$ sudo nginx -s reload
-
-
-
-
h2. Prepare the API server deployment
@@ -332,7 +265,13 @@ h2. Prepare the API server deployment
{% include 'notebox_begin' %}
You can safely ignore the following messages if they appear while this command runs:
-Don't run Bundler as root. Bundler can ask for sudo if it is needed, and installing your bundle as root will
-break this application for all non-root users on this machine.
-fatal: Not a git repository (or any of the parent directories): .git
+
+Don't run Bundler as root. Bundler can ask for sudo if it is needed, and installing your bundle as root will
+break this application for all non-root users on this machine.
+
+fatal: Not a git repository (or any of the parent directories): .git
{% include 'notebox_end' %}
+
+h2. Troubleshooting
+
+Once you have the API Server up and running you may need to check it back if dealing with client related issues. Please read our "admin troubleshooting notes":{{site.baseurl}}/admin/troubleshooting.html on how requests can be tracked down between services.
\ No newline at end of file