X-Git-Url: https://git.arvados.org/arvados.git/blobdiff_plain/0eb72b526bf8bbb011551ecf019f604e17a534f1..d22da8c4ae59fa50bfecaf3c5857fe8c0cc5fae7:/doc/install/install-api-server.html.textile.liquid?ds=sidebyside
diff --git a/doc/install/install-api-server.html.textile.liquid b/doc/install/install-api-server.html.textile.liquid
index 7201460dde..c234bca927 100644
--- a/doc/install/install-api-server.html.textile.liquid
+++ b/doc/install/install-api-server.html.textile.liquid
@@ -35,102 +35,124 @@ On a Red Hat-based system, install the following packages:
{% include 'install_git' %}
-h2(#configure). Set up the database
-
-Configure the API server to connect to your database by updating @/etc/arvados/api/database.yml@. Replace the @xxxxxxxx@ database password placeholder with the "password you generated during database setup":install-postgresql.html#api. Be sure to update the @production@ section.
-
-
-~$ editor /etc/arvados/api/database.yml
-
-
h2(#configure_application). Configure the API server
-Edit @/etc/arvados/api/application.yml@ to configure the settings described in the following sections. The API server reads both @application.yml@ and its own @config/application.default.yml@ file. The settings in @application.yml@ take precedence over the defaults that are defined in @config/application.default.yml@. The @config/application.yml.example@ file is not read by the API server and is provided as a starting template only.
+Edit @/etc/arvados/config.yml@ to set the keys below. Only the most important configuration options are listed here. The example configuration fragments given below should be merged into a single configuration structure. Correct indentation is important. The full set of configuration options are listed in "config.yml":{{site.baseurl}}/admin/config.html
-@config/application.default.yml@ documents additional configuration settings not listed here. You can "view the current source version":https://dev.arvados.org/projects/arvados/repository/revisions/master/entry/services/api/config/application.default.yml for reference.
+h3(#uuid_prefix). ClusterID
-Only put local configuration in @application.yml@. Do not edit @application.default.yml@.
+The @ClusterID@ is used for all database identifiers to identify the record as originating from this site. It is the first key under @Clusters@ in @config.yml@. It must be exactly 5 lowercase ASCII letters and digits. All configuration items go under the cluster id key (replace @zzzzz@ with your cluster id in the examples below).
-h3(#uuid_prefix). uuid_prefix
+
+Clusters:
+ zzzzz:
+ ...
+
-Define your @uuid_prefix@ in @application.yml@ by setting the @uuid_prefix@ field in the section for your environment. This prefix is used for all database identifiers to identify the record as originating from this site. It must be exactly 5 lowercase ASCII letters and digits.
+h3(#configure). PostgreSQL.Connection
-Example @application.yml@:
+Replace the @xxxxxxxx@ database password placeholder with the "password you generated during database setup":install-postgresql.html#api.
- uuid_prefix: zzzzz
+Clusters:
+ zzzzz:
+ PostgreSQL:
+ Connection:
+ host: localhost
+ user: arvados
+ password: xxxxxxxx
+ dbname: arvados_production
+
-h3. secret_token
+h3. API.RailsSessionSecretToken
-The @secret_token@ is used for for signing cookies. IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @application.yml@:
+The @API.RailsSessionSecretToken@ is used for for signing cookies. IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @config.yml@:
~$ ruby -e 'puts rand(2**400).to_s(36)'
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
-Example @application.yml@:
+Example @config.yml@:
- secret_token: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
+Clusters:
+ zzzzz:
+ API:
+ RailsSessionSecretToken: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
-h3(#blob_signing_key). blob_signing_key
+h3(#blob_signing_key). Collections.BlobSigningKey
-The @blob_signing_key@ is used to enforce access control to Keep blocks. This same key must be provided to the Keepstore daemons when "installing Keepstore servers.":install-keepstore.html IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @application.yml@:
+The @Collections.BlobSigningKey@ is used to enforce access control to Keep blocks. This same key must be provided to the Keepstore daemons when "installing Keepstore servers.":install-keepstore.html IMPORTANT: This is a site secret. It should be at least 50 characters. Generate a random value and set it in @config.yml@:
~$ ruby -e 'puts rand(2**400).to_s(36)'
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-Example @application.yml@:
+Example @config.yml@:
- blob_signing_key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+Clusters:
+ zzzzz:
+ Collections:
+ BlobSigningKey: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-h3(#omniauth). sso_app_secret, sso_app_id, sso_provider_url
+h3(#omniauth). Login.ProviderAppID, Login.ProviderAppSecret, Services.SSO.ExternalURL
The following settings enable the API server to communicate with the "Single Sign On (SSO) server":install-sso.html to authenticate user log in.
-Set @sso_provider_url@ to the base URL where your SSO server is installed. This should be a URL consisting of the scheme and host (and optionally, port), without a trailing slash.
+Set @Services.SSO.ExternalURL@ to the base URL where your SSO server is installed. This should be a URL consisting of the scheme and host (and optionally, port), without a trailing slash.
-Set @sso_app_secret@ and @sso_app_id@ to the corresponding values for @app_secret@ and @app_id@ used in the "Create arvados-server client for Single Sign On (SSO)":install-sso.html#client step.
+Set @Login.ProviderAppID@ and @Login.ProviderAppSecret@ to the corresponding values for @app_id@ and @app_secret@ used in the "Create arvados-server client for Single Sign On (SSO)":install-sso.html#client step.
-Example @application.yml@:
+Example @config.yml@:
- sso_app_id: arvados-server
- sso_app_secret: wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
- sso_provider_url: https://sso.example.com
-
+Clusters:
+ zzzzz:
+ Services:
+ SSO:
+ ExternalURL: https://sso.example.com
+ Login:
+ ProviderAppID: arvados-server
+ ProviderAppSecret: wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
-h3. workbench_address
+h3. Services.Workbench1.ExternalURL
-Set @workbench_address@ to the URL of your workbench application after following "Install Workbench.":install-workbench-app.html
+Set @Services.Workbench1.ExternalURL@ to the URL of your workbench application after following "Install Workbench.":install-workbench-app.html
-Example @application.yml@:
+Example @config.yml@:
- workbench_address: https://workbench.zzzzz.example.com
+Clusters:
+ zzzzz:
+ Services:
+ Workbench1:
+ ExternalURL: https://workbench.zzzzz.example.com
-h3. websocket_address
+h3. Services.Websocket.ExternalURL
-Set @websocket_address@ to the @wss://@ URL of the API server websocket endpoint after following "Set up Web servers":#set_up. The path of the default endpoint is @/websocket@.
+Set @Services.Websocket.ExternalURL@ to the @wss://@ URL of the API server websocket endpoint after following "Install the websocket server":install-ws.html .
-Example @application.yml@:
+Example @config.yml@:
- websocket_address: wss://ws.zzzzz.example.com/websocket
+Clusters:
+ zzzzz:
+ Services:
+ Websocket:
+ ExternalURL: wss://ws.zzzzz.example.com
-h3(#git_repositories_dir). git_repositories_dir
+h3(#git_repositories_dir). Git.Repositories
-The @git_repositories_dir@ setting specifies the directory where user git repositories will be stored.
+The @Git.Repositories@ setting specifies the directory where user git repositories will be stored.
The git server setup process is covered on "its own page":install-arv-git-httpd.html. For now, create an empty directory in the default location:
@@ -138,24 +160,47 @@ The git server setup process is covered on "its own page":install-arv-git-httpd.
~$ sudo mkdir -p /var/lib/arvados/git/repositories
-If you intend to store your git repositories in a different location, specify that location in @application.yml@.
+If you intend to store your git repositories in a different location, specify that location in @config.yml@. Example:
-Default setting in @application.default.yml@:
+
+Clusters:
+ zzzzz:
+ Git:
+ Repositories: /var/lib/arvados/git/repositories
+
+
+h3(#enable_legacy_jobs_api). Containers.JobsAPI.Enable
+
+Enable the legacy "Jobs API":install-crunch-dispatch.html . Note: new installations should use the "Containers API":crunch2-slurm/install-prerequisites.html
+
+Disabling the jobs API means methods involving @jobs@, @job_tasks@, @pipeline_templates@ and @pipeline_instances@ are disabled. This functionality is superceded by the containers API which consists of @container_requests@, @containers@ and @workflows@. Arvados clients (such as @arvados-cwl-runner@) detect which APIs are available and adjust behavior accordingly. Note the configuration value must be a quoted string.
+
+* 'auto' -- (default) enable the Jobs API only if it has been used before (i.e., there are job records in the database), otherwise disable jobs API .
+* 'true' -- enable the Jobs API even if there are no existing job records.
+* 'false' -- disable the Jobs API even in the presence of existing job records.
- git_repositories_dir: /var/lib/arvados/git/repositories
-
+Clusters:
+ zzzzz:
+ Containers:
+ JobsAPI:
+ Enable: 'auto'
-h3(#git_internal_dir). git_internal_dir
+h4(#git_internal_dir). Containers.JobsAPI.GitInternalDir
-The @git_internal_dir@ setting specifies the location of Arvados' internal git repository. By default this is @/var/lib/arvados/internal.git@. This repository stores git commits that have been used to run Crunch jobs. It should _not_ be a subdirectory of @git_repositories_dir@.
+Only required if the legacy "Jobs API" is enabled, otherwise you should skip this.
-Example @application.yml@:
+The @Containers.JobsAPI.GitInternalDir@ setting specifies the location of Arvados' internal git repository. By default this is @/var/lib/arvados/internal.git@. This repository stores git commits that have been used to run Crunch jobs. It should _not_ be a subdirectory of the directory in @Git.Repositories@.
+
+Example @config.yml@:
- git_internal_dir: /var/lib/arvados/internal.git
-
+Clusters:
+ zzzzz:
+ Containers:
+ JobsAPI:
+ GitInternalDir: /var/lib/arvados/internal.git
h2(#set_up). Set up Nginx and Passenger
@@ -164,10 +209,11 @@ The Nginx server will serve API requests using Passenger. It will also be used t
First, "Install Nginx and Phusion Passenger":https://www.phusionpassenger.com/library/walkthroughs/deploy/ruby/ownserver/nginx/oss/install_passenger_main.html.
-Edit the http section of your Nginx configuration to run the Passenger server, and serve SSL requests. Add a block like the following, adding SSL and logging parameters to taste:
+Edit the http section of your Nginx configuration to run the Passenger server. Add a block like the following, adding SSL and logging parameters to taste:
-server {
+
+server {
listen 127.0.0.1:8000;
server_name localhost-api;
@@ -183,7 +229,7 @@ Edit the http section of your Nginx configuration to run the Passenger server, a
# also ensure the following settings match it:
# * `client_max_body_size` in the server section below
# * `client_max_body_size` in the Workbench Nginx configuration (twice)
- # * `max_request_size` in the API server's application.yml file
+ # * `API.MaxRequestSize` in config.yml
client_max_body_size 128m;
}
@@ -202,33 +248,6 @@ geo $external_client {
default 1;
10.20.30.0/24 0;
}
-
-server {
- listen [your public IP address]:443 ssl;
- server_name uuid_prefix.your.domain;
-
- ssl on;
- ssl_certificate /YOUR/PATH/TO/cert.pem;
- ssl_certificate_key /YOUR/PATH/TO/cert.key;
-
- index index.html index.htm index.php;
-
- # Refer to the comment about this setting in the server section above.
- client_max_body_size 128m;
-
- location / {
- proxy_pass http://api;
- proxy_redirect off;
- proxy_connect_timeout 90s;
- proxy_read_timeout 300s;
-
- proxy_set_header X-Forwarded-Proto https;
- proxy_set_header Host $http_host;
- proxy_set_header X-External-Client $external_client;
- proxy_set_header X-Real-IP $remote_addr;
- proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
- }
-}
@@ -252,3 +271,7 @@ break this application for all non-root users on this machine.
fatal: Not a git repository (or any of the parent directories): .git
{% include 'notebox_end' %}
+
+h2. Troubleshooting
+
+Once you have the API Server up and running you may need to check it back if dealing with client related issues. Please read our "admin troubleshooting notes":{{site.baseurl}}/admin/troubleshooting.html on how requests can be tracked down between services.
\ No newline at end of file