SPDX-License-Identifier: CC-BY-SA-3.0
{% endcomment %}
+# "Introduction":#introduction
+# "Update config.yml":#update-config
+# "Install keepstore package":#install-packages
+# "Restart the API server and controller":#restart-api
+# "Confirm working installation":#confirm-working
+# "Note on storage management":#note
+
+h2. Introduction
+
Keepstore provides access to underlying storage for reading and writing content-addressed blocks, with enforcement of Arvados permissions. Keepstore supports a variety of cloud object storage and POSIX filesystems for its backing store.
h3. Plan your storage layout
<div class="offset1">
table(table table-bordered table-condensed).
-|_Hostname_|
-|keep0.@uuid_prefix@.your.domain|
-|keep1.@uuid_prefix@.your.domain|
+|_. Hostname|
+|@keep0.ClusterID.example.com@|
+|@keep1.ClusterID.example.com@|
</div>
Keepstore servers should not be directly accessible from the Internet (they are accessed via "keepproxy":install-keepproxy.html), so the hostnames only need to resolve on the private network.
-h2. Install Keepstore
-
-On Debian-based systems:
-
-<notextile>
-<pre><code>~$ <span class="userinput">sudo apt-get install keepstore</span>
-</code></pre>
-</notextile>
-
-On Red Hat-based systems:
-
-<notextile>
-<pre><code>~$ <span class="userinput">sudo yum install keepstore</span>
-</code></pre>
-</notextile>
-
-Verify that Keepstore is functional:
-
-<notextile>
-<pre><code>~$ <span class="userinput">keepstore --version</span>
-</code></pre>
-</notextile>
+h2(#update-config). Update cluster config
-h3. Create a superuser token
+h3. Configure storage volumes
-If you haven't already done so, create a superuser token.
+Fill in the @Volumes@ section of @config.yml@ for each storage volume. Available storage volume types include POSIX filesystems and cloud object storage. It is possible to have different volume types in the same cluster.
-{% include 'create_superuser_token' %}
+* To use a POSIX filesystem, including both local filesystems (ext4, xfs) and network file system such as GPFS or Lustre, follow the setup instructions on "Filesystem storage":configure-fs-storage.html
+* If you are using S3-compatible object storage (including Amazon S3, Google Cloud Storage, and Ceph RADOS), follow the setup instructions on "S3 Object Storage":configure-s3-object-storage.html
+* If you are using Azure Blob Storage, follow the setup instructions on "Azure Blob Storage":configure-azure-blob-storage.html
-h3. Update cluster config file
+h3. List services
-Add or update the following sections of @/etc/arvados/config.yml@ as needed. Refer to the examples and comments in the "default config.yml file":{{site.baseurl}}/admin/config.html for more information.
+Add each keepstore server to the @Services.Keepstore@ section of @/etc/arvados/config.yml@ .
<notextile>
-<pre><code>Clusters:
- <span class="userinput">uuid_prefix</span>:
- SystemRootToken: zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
- Services:
+<pre><code> Services:
Keepstore:
+ # No ExternalURL because they are only accessed by the internal subnet.
InternalURLs:
- "http://<span class="userinput">keep0.uuid_prefix.example.com</span>:25107/": {}
- API:
- MaxKeepBlobBuffers: 128
+ "http://<span class="userinput">keep0.ClusterID.example.com</span>:25107": {}
+ "http://<span class="userinput">keep1.ClusterID.example.com</span>:25107": {}
+ # and so forth
</code></pre>
</notextile>
-h3. Note on storage management
-
-On its own, a keepstore server never deletes data. Instead, the keep-balance service determines which blocks are candidates for deletion and instructs the keepstore to move those blocks to the trash. Please see the "Balancing Keep servers":{{site.baseurl}}/admin/keep-balance.html for more details.
-
-h3. Configure storage volumes
+{% assign arvados_component = 'keepstore' %}
-Available storage volume types include POSIX filesystems and cloud object storage.
+{% include 'install_packages' %}
-* To use a POSIX filesystem, including both local filesystems (ext4, xfs) and network file system such as GPFS or Lustre, follow the setup instructions on "Filesystem storage":configure-fs-storage.html
-* If you are using S3-compatible object storage (including Amazon S3, Google Cloud Storage, and Ceph RADOS), follow the setup instructions on "S3 Object Storage":configure-s3-object-storage.html
-* If you are using Azure Blob Storage, follow the setup instructions on "Azure Blob Storage":configure-azure-blob-storage.html
+{% include 'start_service' %}
-h2. Run keepstore as a supervised service
+{% include 'restart_api' %}
-h3. Start the service (option 1: systemd)
+h2(#confirm-working). Confirm working installation
-If your system does not use systemd, skip this section and follow the "runit instructions":#runit instead.
+Log into a host that is on your private Arvados network. The host should be able to contact your your keepstore servers (eg keep[0-9].ClusterID.example.com).
-If your system uses systemd, the keepstore service should already be set up. Restart it to read the updated configuration, and check its status:
+@ARVADOS_API_HOST@ and @ARVADOS_API_TOKEN@ must be set in the environment.
-<notextile>
-<pre><code>~$ <span class="userinput">sudo systemctl restart keepstore</span>
-~$ <span class="userinput">sudo systemctl status keepstore</span>
-● keepstore.service - Arvados Keep Storage Daemon
- Loaded: loaded (/etc/systemd/system/keepstore.service; enabled; vendor preset: enabled)
- Active: active (running) since Tue 2019-09-10 14:16:29 UTC; 1s ago
- Docs: https://doc.arvados.org/
- Main PID: 25465 (keepstore)
- Tasks: 9 (limit: 4915)
- CGroup: /system.slice/keepstore.service
- └─25465 /usr/bin/keepstore
-[...]
-</code></pre>
-</notextile>
+@ARVADOS_API_HOST@ should be the hostname of the API server.
-h3(#runit). Start the service (option 2: runit)
+@ARVADOS_API_TOKEN@ should be the system root token.
-Install runit to supervise the keepstore daemon. {% include 'install_runit' %}
+Install the "Command line SDK":{{site.baseurl}}/sdk/cli/install.html
-Install this script as the run script @/etc/sv/keepstore/run@ for the keepstore service:
+Check that the keepstore server is in the @keep_service@ "accessible" list:
<notextile>
-<pre><code>#!/bin/sh
-
-exec 2>&1
-GOGC=10 exec keepstore
+<pre><code>
+$ <span class="userinput">arv keep_service accessible</span>
+[...]
</code></pre>
</notextile>
-h2. Set up additional servers
-
-Repeat the above sections to prepare volumes and bring up supervised services on each Keepstore server you are setting up.
+If keepstore does not show up in the "accessible" list, and you are accessing it from within the private network, check that you have "properly configured the @geo@ block for the API server":install-api-server.html#update-nginx .
-h2. Restart the API server and controller
+Next, install the "Python SDK":{{site.baseurl}}/sdk/python/sdk-python.html
-After adding all of your keepstore servers to the Services section, make sure the cluster config file is up to date on the API server host, and restart the API server and controller processes to ensure the changes are applied.
+You should now be able to use @arv-put@ to upload collections and @arv-get@ to fetch collections. Be sure to execute this from _inside_ the cluster's private network. You will be able to access keep from _outside_ the private network after setting up "keepproxy":install-keepproxy.html .
-<pre>
-sudo systemctl restart nginx arvados-controller
-</pre>
+{% include 'arv_put_example' %}
-h2(#testing). Testing keep
-
-Install the "Python SDK":{{site.baseurl}}/sdk/python/sdk-python.html
-
-@ARVADOS_API_HOST@ and @ARVADOS_API_TOKEN@ must be set in the environment.
+h2(#note). Note on storage management
-You should now be able to use @arv-put@ to upload collections and @arv-get@ to fetch collections:
-
-<pre>
-$ echo "hello world!" > hello.txt
-
-$ arv-put --portable-data-hash hello.txt
-2018-07-12 13:35:25 arvados.arv_put[28702] INFO: Creating new cache file at /home/example/.cache/arvados/arv-put/1571ec0adb397c6a18d5c74cc95b3a2a
-0M / 0M 100.0% 2018-07-12 13:35:27 arvados.arv_put[28702] INFO:
-
-2018-07-12 13:35:27 arvados.arv_put[28702] INFO: Collection saved as 'Saved at 2018-07-12 17:35:25 UTC by example@example'
-59389a8f9ee9d399be35462a0f92541c+53
-
-$ arv-get 59389a8f9ee9d399be35462a0f92541c+53/hello.txt
-hello world!
-</pre>
+On its own, a keepstore server never deletes data. Instead, the keep-balance service determines which blocks are candidates for deletion and instructs the keepstore to move those blocks to the trash. Please see the "Balancing Keep servers":{{site.baseurl}}/admin/keep-balance.html for more details.
projects / arvados.git / blobdiff