-#!/bin/bash
+#!/bin/bash
# Copyright (C) The Arvados Authors. All rights reserved.
#
#
# vagrant up
-##########################################################
-# This section are the basic parameters to configure the installation
-
-# The 5 letters name you want to give your cluster
-CLUSTER="arva2"
-DOMAIN="arv.local"
-
-INITIAL_USER="admin"
-
-# If not specified, the initial user email will be composed as
-# INITIAL_USER@CLUSTER.DOMAIN
-INITIAL_USER_EMAIL="${INITIAL_USER}@${CLUSTER}.${DOMAIN}"
-INITIAL_USER_PASSWORD="password"
-
-# The example config you want to use. Currently, only "single_host" is
-# available
-CONFIG_DIR="single_host"
-
-# Which release of Arvados repo you want to use
-RELEASE="production"
-# Which version of Arvados you want to install. Defaults to 'latest'
-# in the desired repo
-VERSION="latest"
-
-# Host SSL port where you want to point your browser to access Arvados
-# Defaults to 443 for regular runs, and to 8443 when called in Vagrant.
-# You can point it to another port if desired
-# In Vagrant, make sure it matches what you set in the Vagrantfile
-# HOST_SSL_PORT=443
-
-# This is a arvados-formula setting.
-# If branch is set, the script will switch to it before running salt
-# Usually not needed, only used for testing
-# BRANCH="master"
+set -o pipefail
-##########################################################
-# Usually there's no need to modify things below this line
+_exit_handler() {
+ local rc="$?"
+ trap - EXIT
+ if [ "$rc" -ne 0 ]; then
+ echo "Error occurred ($rc) while running $0 at line $1 : $BASH_COMMAND"
+ fi
+ exit "$rc"
+}
-set -o pipefail
+trap '_exit_handler $LINENO' EXIT ERR
# capture the directory that the script is running from
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
echo >&2 "Usage: ${0} [-h] [-h]"
echo >&2
echo >&2 "${0} options:"
- echo >&2 " -d, --debug Run salt installation in debug mode"
- echo >&2 " -p <N>, --ssl-port <N> SSL port to use for the web applications"
- echo >&2 " -t, --test Test installation running a CWL workflow"
- echo >&2 " -h, --help Display this help and exit"
- echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
+ echo >&2 " -d, --debug Run salt installation in debug mode"
+ echo >&2 " -c <local.params>, --config <local.params> Path to the local.params config file"
+ echo >&2 " -t, --test Test installation running a CWL workflow"
+ echo >&2 " -r, --roles List of Arvados roles to apply to the host, comma separated"
+ echo >&2 " Possible values are:"
+ echo >&2 " api"
+ echo >&2 " controller"
+ echo >&2 " dispatcher"
+ echo >&2 " keepproxy"
+ echo >&2 " keepbalance"
+ echo >&2 " keepstore"
+ echo >&2 " keepweb"
+ echo >&2 " shell"
+ echo >&2 " webshell"
+ echo >&2 " websocket"
+ echo >&2 " workbench"
+ echo >&2 " workbench2"
+ echo >&2 " Defaults to applying them all"
+ echo >&2 " -h, --help Display this help and exit"
+ echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
+ echo >&2 " This parameter does not perform any installation at all. It's"
+ echo >&2 " intended to give you a parsed sot of configuration files so"
+ echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
+ echo >&2 " It"
+ echo >&2 " - parses the pillar and states templates,"
+ echo >&2 " - downloads the helper formulas with their desired versions,"
+ echo >&2 " - prepares the 'top.sls' files both for pillars and states"
+ echo >&2 " for the selected role/s"
+ echo >&2 " - writes the resulting files into <dest_dir>"
+ echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
+ echo >&2 " --development Run in dev mode, using snakeoil certs"
echo >&2
}
arguments() {
# NOTE: This requires GNU getopt (part of the util-linux package on Debian-based distros).
- TEMP=$(getopt -o dhp:tv \
- --long debug,help,ssl-port:,test,vagrant \
+ if ! which getopt > /dev/null; then
+ echo >&2 "GNU getopt is required to run this script. Please install it and re-reun it"
+ exit 1
+ fi
+
+ TEMP=$(getopt -o c:dhp:r:tv \
+ --long config:,debug,development,dump-config:,help,roles:,test,vagrant \
-n "${0}" -- "${@}")
- if [ ${?} != 0 ] ; then echo "GNU getopt missing? Use -h for help"; exit 1 ; fi
+ if [ ${?} != 0 ];
+ then echo "Please check the parameters you entered and re-run again"
+ exit 1
+ fi
# Note the quotes around `$TEMP': they are essential!
eval set -- "$TEMP"
while [ ${#} -ge 1 ]; do
case ${1} in
+ -c | --config)
+ CONFIG_FILE=${2}
+ shift 2
+ ;;
-d | --debug)
LOG_LEVEL="debug"
shift
+ set -x
+ ;;
+ --dump-config)
+ if [[ ${2} = /* ]]; then
+ DUMP_SALT_CONFIG_DIR=${2}
+ else
+ DUMP_SALT_CONFIG_DIR=${PWD}/${2}
+ fi
+ ## states
+ S_DIR="${DUMP_SALT_CONFIG_DIR}/salt"
+ ## formulas
+ F_DIR="${DUMP_SALT_CONFIG_DIR}/formulas"
+ ## pillars
+ P_DIR="${DUMP_SALT_CONFIG_DIR}/pillars"
+ ## tests
+ T_DIR="${DUMP_SALT_CONFIG_DIR}/tests"
+ DUMP_CONFIG="yes"
+ shift 2
+ ;;
+ --development)
+ DEV_MODE="yes"
+ shift 1
+ ;;
+ -r | --roles)
+ for i in ${2//,/ }
+ do
+ # Verify the role exists
+ if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher" == *"$i"* ]]; then
+ echo "The role '${i}' is not a valid role"
+ usage
+ exit 1
+ fi
+ ROLES="${ROLES} ${i}"
+ done
+ shift 2
;;
-t | --test)
TEST="yes"
VAGRANT="yes"
shift
;;
- -p | --ssl-port)
- HOST_SSL_PORT=${2}
- shift 2
- ;;
--)
shift
break
done
}
+copy_custom_cert() {
+ cert_dir=${1}
+ cert_name=${2}
+
+ mkdir -p /srv/salt/certs
+
+ if [ -f ${cert_dir}/${cert_name}.crt ]; then
+ cp -v ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
+ else
+ echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
+ exit 1
+ fi
+ if [ -f ${cert_dir}/${cert_name}.key ]; then
+ cp -v ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
+ else
+ echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
+ exit 1
+ fi
+}
+
+DEV_MODE="no"
+CONFIG_FILE="${SCRIPT_DIR}/local.params"
+CONFIG_DIR="local_config_dir"
+DUMP_CONFIG="no"
LOG_LEVEL="info"
-HOST_SSL_PORT=443
+CONTROLLER_EXT_SSL_PORT=443
TESTS_DIR="tests"
-arguments ${@}
+NGINX_INSTALL_SOURCE="install_from_repo"
+
+CLUSTER=""
+DOMAIN=""
+
+# Hostnames/IPs used for single-host deploys
+IP_INT="127.0.1.1"
+
+# Initial user setup
+INITIAL_USER=""
+INITIAL_USER_EMAIL=""
+INITIAL_USER_PASSWORD=""
+
+CONTROLLER_EXT_SSL_PORT=8000
+KEEP_EXT_SSL_PORT=25101
+# Both for collections and downloads
+KEEPWEB_EXT_SSL_PORT=9002
+WEBSHELL_EXT_SSL_PORT=4202
+WEBSOCKET_EXT_SSL_PORT=8002
+WORKBENCH1_EXT_SSL_PORT=443
+WORKBENCH2_EXT_SSL_PORT=3001
+
+SSL_MODE="self-signed"
+USE_LETSENCRYPT_ROUTE53="no"
+CUSTOM_CERTS_DIR="${SCRIPT_DIR}/certs"
+
+## These are ARVADOS-related parameters
+# For a stable release, change RELEASE "production" and VERSION to the
+# package version (including the iteration, e.g. X.Y.Z-1) of the
+# release.
+# The "local.params.example.*" files already set "RELEASE=production"
+# to deploy production-ready packages
+RELEASE="development"
+VERSION="latest"
+
+# These are arvados-formula-related parameters
+# An arvados-formula tag. For a stable release, this should be a
+# branch name (e.g. X.Y-dev) or tag for the release.
+# ARVADOS_TAG="2.2.0"
+# BRANCH="main"
+
+# Other formula versions we depend on
+POSTGRES_TAG="v0.44.0"
+NGINX_TAG="v2.8.1"
+DOCKER_TAG="v2.4.2"
+LOCALE_TAG="v0.3.4"
+LETSENCRYPT_TAG="v2.1.0"
# Salt's dir
+DUMP_SALT_CONFIG_DIR=""
## states
S_DIR="/srv/salt"
## formulas
F_DIR="/srv/formulas"
-##pillars
+## pillars
P_DIR="/srv/pillars"
+## tests
+T_DIR="/tmp/cluster_tests"
+
+arguments ${@}
+
+if [ -s ${CONFIG_FILE} ]; then
+ source ${CONFIG_FILE}
+else
+ echo >&2 "You don't seem to have a config file with initial values."
+ echo >&2 "Please create a '${CONFIG_FILE}' file as described in"
+ echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
+ echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
+ exit 1
+fi
+
+if [ ! -d ${CONFIG_DIR} ]; then
+ echo >&2 "You don't seem to have a config directory with pillars and states."
+ echo >&2 "Please create a '${CONFIG_DIR}' directory (as configured in your '${CONFIG_FILE}'). Please see"
+ echo >&2 " * https://doc.arvados.org/install/salt-single-host.html#single_host, or"
+ echo >&2 " * https://doc.arvados.org/install/salt-multi-host.html#multi_host_multi_hostnames"
+ exit 1
+fi
+
+if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
+ echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
+ echo >&2 "Please, fix them and re-run the provision script."
+ exit 1
+fi
-apt-get update
-apt-get install -y curl git jq
+if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
+ echo >&2 "ERROR: <CLUSTER> must be exactly 5 alphanumeric characters long"
+ echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
+ exit 1
+fi
-dpkg -l |grep salt-minion
-if [ ${?} -eq 0 ]; then
- echo "Salt already installed"
+# Only used in single_host/single_name deploys
+if [ ! -z "${HOSTNAME_EXT}" ] ; then
+ # We need to add some extra control vars to manage a single certificate vs. multiple
+ USE_SINGLE_HOSTNAME="yes"
+ # Make sure that the value configured as IP_INT is a real IP on the system.
+ # If we don't error out early here when there is a mismatch, the formula will
+ # fail with hard to interpret nginx errors later on.
+ ip addr list |grep -q "${IP_INT}/"
+ if [[ $? -ne 0 ]]; then
+ echo "Unable to find the IP_INT address '${IP_INT}' on the system, please correct the value in local.params. Exiting..."
+ exit 1
+ fi
else
- curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
- sh /tmp/bootstrap_salt.sh -XUdfP -x python3
- /bin/systemctl disable salt-minion.service
+ USE_SINGLE_HOSTNAME="no"
+ # We set this variable, anyway, so sed lines do not fail and we don't need to add more
+ # conditionals
+ HOSTNAME_EXT="${CLUSTER}.${DOMAIN}"
fi
-# Set salt to masterless mode
-cat > /etc/salt/minion << EOFSM
+if [ "${DUMP_CONFIG}" = "yes" ]; then
+ echo "The provision installer will just dump a config under ${DUMP_SALT_CONFIG_DIR} and exit"
+else
+ # Install a few dependency packages
+ # First, let's figure out the OS we're working on
+ OS_ID=$(grep ^ID= /etc/os-release |cut -f 2 -d= |cut -f 2 -d \")
+ echo "Detected distro: ${OS_ID}"
+
+ case ${OS_ID} in
+ "centos")
+ echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
+ sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
+ setenforce permissive
+ yum install -y curl git jq
+ ;;
+ "debian"|"ubuntu")
+ DEBIAN_FRONTEND=noninteractive apt update
+ DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
+ ;;
+ esac
+
+ if which salt-call; then
+ echo "Salt already installed"
+ else
+ curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
+ sh /tmp/bootstrap_salt.sh -XdfP -x python3
+ /bin/systemctl stop salt-minion.service
+ /bin/systemctl disable salt-minion.service
+ fi
+
+ # Set salt to masterless mode
+ cat > /etc/salt/minion << EOFSM
+failhard: "True"
+
file_client: local
file_roots:
base:
- ${S_DIR}
- ${F_DIR}/*
- - ${F_DIR}/*/test/salt/states
pillar_roots:
base:
- ${P_DIR}
EOFSM
+fi
-mkdir -p ${S_DIR}
-mkdir -p ${F_DIR}
-mkdir -p ${P_DIR}
+mkdir -p ${S_DIR} ${F_DIR} ${P_DIR} ${T_DIR}
+
+# Get the formula and dependencies
+cd ${F_DIR} || exit 1
+echo "Cloning formulas"
+rm -rf ${F_DIR}/* || exit 1
+git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
+( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" -b "${DOCKER_TAG}" )
+
+echo "...locale"
+git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
+( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" -b "${LOCALE_TAG}" )
+
+echo "...nginx"
+git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
+( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" -b "${NGINX_TAG}" )
+
+echo "...postgres"
+git clone --quiet https://github.com/saltstack-formulas/postgres-formula.git ${F_DIR}/postgres
+( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" -b "${POSTGRES_TAG}" )
+
+echo "...letsencrypt"
+git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
+( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" -b "${LETSENCRYPT_TAG}" )
+
+echo "...arvados"
+git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
+
+# If we want to try a specific branch of the formula
+if [ "x${BRANCH}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${BRANCH}" ]; then
+ ( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
+elif [ "x${ARVADOS_TAG}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${ARVADOS_TAG}" ]; then
+( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
+fi
+
+if [ "x${VAGRANT}" = "xyes" ]; then
+ EXTRA_STATES_DIR="/home/vagrant/${CONFIG_DIR}/states"
+ SOURCE_PILLARS_DIR="/home/vagrant/${CONFIG_DIR}/pillars"
+ SOURCE_TESTS_DIR="/home/vagrant/${TESTS_DIR}"
+else
+ EXTRA_STATES_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/states"
+ SOURCE_PILLARS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}/pillars"
+ SOURCE_TESTS_DIR="${SCRIPT_DIR}/${TESTS_DIR}"
+fi
+
+SOURCE_STATES_DIR="${EXTRA_STATES_DIR}"
+
+echo "Writing pillars and states"
+
+# Replace variables (cluster, domain, etc) in the pillars, states and tests
+# to ease deployment for newcomers
+if [ ! -d "${SOURCE_PILLARS_DIR}" ]; then
+ echo "${SOURCE_PILLARS_DIR} does not exist or is not a directory. Exiting."
+ exit 1
+fi
+for f in $(ls "${SOURCE_PILLARS_DIR}"/*); do
+ sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
+ s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
+ s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+ s#__CLUSTER__#${CLUSTER}#g;
+ s#__DOMAIN__#${DOMAIN}#g;
+ s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
+ s#__IP_INT__#${IP_INT}#g;
+ s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+ s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
+ s#__INITIAL_USER__#${INITIAL_USER}#g;
+ s#__LE_AWS_REGION__#${LE_AWS_REGION}#g;
+ s#__LE_AWS_SECRET_ACCESS_KEY__#${LE_AWS_SECRET_ACCESS_KEY}#g;
+ s#__LE_AWS_ACCESS_KEY_ID__#${LE_AWS_ACCESS_KEY_ID}#g;
+ s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+ s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
+ s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
+ s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
+ s#__RELEASE__#${RELEASE}#g;
+ s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
+ s#__VERSION__#${VERSION}#g;
+ s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
+ s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
+ s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
+ s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
+ s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
+ s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
+ s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
+ s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
+ s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
+ s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
+ s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
+ s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
+ s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
+ s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
+ s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
+ s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
+ s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
+ "${f}" > "${P_DIR}"/$(basename "${f}")
+done
+
+if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
+ echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
+ if [ "x${TEST}" = "xyes" ]; then
+ echo "WARNING: Disabling tests for this installation."
+ fi
+ TEST="no"
+else
+ mkdir -p ${T_DIR}
+ # Replace cluster and domain name in the test files
+ for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
+ FILTERS="s#__CLUSTER__#${CLUSTER}#g;
+ s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+ s#__DOMAIN__#${DOMAIN}#g;
+ s#__IP_INT__#${IP_INT}#g;
+ s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+ s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
+ s#__INITIAL_USER__#${INITIAL_USER}#g;
+ s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+ s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
+ if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
+ FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
+ $FILTERS"
+ fi
+ sed "$FILTERS" \
+ "${f}" > ${T_DIR}/$(basename "${f}")
+ done
+ chmod 755 ${T_DIR}/run-test.sh
+fi
+
+# Replace helper state files that differ from the formula's examples
+if [ -d "${SOURCE_STATES_DIR}" ]; then
+ mkdir -p "${F_DIR}"/extra/extra
+
+ for f in $(ls "${SOURCE_STATES_DIR}"/*); do
+ sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
+ s#__CLUSTER__#${CLUSTER}#g;
+ s#__BLOB_SIGNING_KEY__#${BLOB_SIGNING_KEY}#g;
+ s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+ s#__DOMAIN__#${DOMAIN}#g;
+ s#__HOSTNAME_EXT__#${HOSTNAME_EXT}#g;
+ s#__IP_INT__#${IP_INT}#g;
+ s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+ s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g;
+ s#__INITIAL_USER__#${INITIAL_USER}#g;
+ s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+ s#__KEEPWEB_EXT_SSL_PORT__#${KEEPWEB_EXT_SSL_PORT}#g;
+ s#__KEEP_EXT_SSL_PORT__#${KEEP_EXT_SSL_PORT}#g;
+ s#__MANAGEMENT_TOKEN__#${MANAGEMENT_TOKEN}#g;
+ s#__RELEASE__#${RELEASE}#g;
+ s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g;
+ s#__VERSION__#${VERSION}#g;
+ s#__CLUSTER_INT_CIDR__#${CLUSTER_INT_CIDR}#g;
+ s#__CONTROLLER_INT_IP__#${CONTROLLER_INT_IP}#g;
+ s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
+ s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
+ s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
+ s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
+ s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
+ s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
+ s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
+ s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
+ s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
+ s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
+ s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
+ s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
+ s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
+ s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
+ s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
+ "${f}" > "${F_DIR}/extra/extra"/$(basename "${f}")
+ done
+fi
+
+# Now, we build the SALT states/pillars trees
+# As we need to separate both states and pillars in case we want specific
+# roles, we iterate on both at the same time
# States
cat > ${S_DIR}/top.sls << EOFTSLS
base:
'*':
- - example_single_host_host_entries
- - example_add_snakeoil_certs
- locale
- - nginx.passenger
- - postgres
- - docker
- - arvados
EOFTSLS
# Pillars
cat > ${P_DIR}/top.sls << EOFPSLS
base:
'*':
- - arvados
- locale
- - nginx_api_configuration
- - nginx_controller_configuration
- - nginx_keepproxy_configuration
- - nginx_keepweb_configuration
- - nginx_passenger
- - nginx_websocket_configuration
- - nginx_webshell_configuration
- - nginx_workbench2_configuration
- - nginx_workbench_configuration
- - postgresql
+ - arvados
EOFPSLS
+# States, extra states
+if [ -d "${F_DIR}"/extra/extra ]; then
+ SKIP_SNAKE_OIL="snakeoil_certs"
-# Get the formula and dependencies
-cd ${F_DIR} || exit 1
-for f in postgres arvados nginx docker locale; do
- git clone https://github.com/saltstack-formulas/${f}-formula.git
-done
-
-if [ "x${BRANCH}" != "x" ]; then
- cd ${F_DIR}/arvados-formula || exit 1
- git checkout -t origin/"${BRANCH}"
- cd -
-fi
-
-if [ "x${VAGRANT}" = "xyes" ]; then
- SOURCE_PILLARS_DIR="/vagrant/${CONFIG_DIR}"
- TESTS_DIR="/vagrant/${TESTS_DIR}"
-else
- SOURCE_PILLARS_DIR="${SCRIPT_DIR}/${CONFIG_DIR}"
- TESTS_DIR="${SCRIPT_DIR}/${TESTS_DIR}"
+ if [[ "$DEV_MODE" = "yes" || "${SSL_MODE}" == "self-signed" ]] ; then
+ # In dev mode, we create some snake oil certs that we'll
+ # use as CUSTOM_CERTS, so we don't skip the states file.
+ # Same when using self-signed certificates.
+ SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
+ fi
+ for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
+ echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
+ done
+ # Use byo or self-signed certificates
+ if [ "${SSL_MODE}" != "lets-encrypt" ]; then
+ mkdir -p "${F_DIR}"/extra/extra/files
+ fi
fi
-# Replace cluster and domain name in the example pillars and test files
-for f in "${SOURCE_PILLARS_DIR}"/*; do
- sed "s/__CLUSTER__/${CLUSTER}/g;
- s/__DOMAIN__/${DOMAIN}/g;
- s/__RELEASE__/${RELEASE}/g;
- s/__HOST_SSL_PORT__/${HOST_SSL_PORT}/g;
- s/__GUEST_SSL_PORT__/${GUEST_SSL_PORT}/g;
- s/__INITIAL_USER__/${INITIAL_USER}/g;
- s/__INITIAL_USER_EMAIL__/${INITIAL_USER_EMAIL}/g;
- s/__INITIAL_USER_PASSWORD__/${INITIAL_USER_PASSWORD}/g;
- s/__VERSION__/${VERSION}/g" \
- "${f}" > "${P_DIR}"/$(basename "${f}")
-done
-
-mkdir -p /tmp/cluster_tests
-# Replace cluster and domain name in the example pillars and test files
-for f in "${TESTS_DIR}"/*; do
- sed "s/__CLUSTER__/${CLUSTER}/g;
- s/__DOMAIN__/${DOMAIN}/g;
- s/__HOST_SSL_PORT__/${HOST_SSL_PORT}/g;
- s/__INITIAL_USER__/${INITIAL_USER}/g;
- s/__INITIAL_USER_EMAIL__/${INITIAL_USER_EMAIL}/g;
- s/__INITIAL_USER_PASSWORD__/${INITIAL_USER_PASSWORD}/g" \
- ${f} > /tmp/cluster_tests/$(basename ${f})
-done
-chmod 755 /tmp/cluster_tests/run-test.sh
+# If we want specific roles for a node, just add the desired states
+# and its dependencies
+if [ -z "${ROLES}" ]; then
+ # States
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - extra.aws_credentials" >> ${S_DIR}/top.sls
+ fi
+ grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ else
+ mkdir -p /srv/salt/certs
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ # Copy certs to formula extra/files
+ cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
+ # We add the custom_certs state
+ grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ fi
+ # In self-signed mode, the certificate files will be created and put in the
+ # destination directory by the snakeoil_certs.sls state file
+ fi
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ -e /root/.psqlrc ]; then
- if ! ( grep 'pset pager off' /root/.psqlrc ); then
- RESTORE_PSQL="yes"
- cp /root/.psqlrc /root/.psqlrc.provision.backup
+ echo " - postgres" >> ${S_DIR}/top.sls
+ echo " - docker.software" >> ${S_DIR}/top.sls
+ echo " - arvados" >> ${S_DIR}/top.sls
+ echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+ echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
+
+ # Pillars
+ echo " - docker" >> ${P_DIR}/top.sls
+ echo " - nginx_api_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_controller_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_keepproxy_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_keepweb_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_passenger" >> ${P_DIR}/top.sls
+ echo " - nginx_websocket_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_webshell_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_workbench2_configuration" >> ${P_DIR}/top.sls
+ echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
+ echo " - postgresql" >> ${P_DIR}/top.sls
+
+ # We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
+
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
+ fi
+ grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
+
+ # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
+ for c in controller websocket workbench workbench2 webshell download collections keepproxy; do
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${c}.${CLUSTER}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ ${P_DIR}/nginx_${c}_configuration.sls
+ done
+ else
+ # Use custom certs (either dev mode or prod)
+ grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
+ # And add the certs in the custom_certs pillar
+ echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
+ echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
+
+ for c in controller websocket workbench workbench2 webshell keepweb keepproxy; do
+ # Are we in a single-host-single-hostname env?
+ if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
+ # Are we in a single-host-single-hostname env?
+ CERT_NAME=${HOSTNAME_EXT}
+ else
+ # We are in a multiple-hostnames env
+ CERT_NAME=${c}
+ fi
+
+ if [[ "$SSL_MODE" == "bring-your-own" ]]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${CERT_NAME}
+ fi
+
+ grep -q ${CERT_NAME} ${P_DIR}/extra_custom_certs.sls || echo " - ${CERT_NAME}" >> ${P_DIR}/extra_custom_certs.sls
+
+ # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${CERT_NAME}.pem/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${CERT_NAME}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${CERT_NAME}.key#g" \
+ ${P_DIR}/nginx_${c}_configuration.sls
+ done
fi
else
- DELETE_PSQL="yes"
+ # If we add individual roles, make sure we add the repo first
+ echo " - arvados.repo" >> ${S_DIR}/top.sls
+ # We add the extra_custom_certs state
+ grep -q "extra.custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+
+ # And we add the basic part for the certs pillar
+ if [ "${SSL_MODE}" != "lets-encrypt" ]; then
+ # And add the certs in the custom_certs pillar
+ echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
+ echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
+ grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
+ fi
+
+ for R in ${ROLES}; do
+ case "${R}" in
+ "database")
+ # States
+ echo " - postgres" >> ${S_DIR}/top.sls
+ # Pillars
+ echo ' - postgresql' >> ${P_DIR}/top.sls
+ ;;
+ "api")
+ # States
+ # FIXME: https://dev.arvados.org/issues/17352
+ grep -q "postgres.client" ${S_DIR}/top.sls || echo " - postgres.client" >> ${S_DIR}/top.sls
+ if grep -q " - nginx.*$" ${S_DIR}/top.sls; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
+ else
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ fi
+ ### If we don't install and run LE before arvados-api-server, it fails and breaks everything
+ ### after it. So we add this here as we are, after all, sharing the host for api and controller
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
+ fi
+ grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ else
+ # Use custom certs
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} controller
+ fi
+ grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
+ fi
+ grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ # Pillars
+ grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
+ grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
+ grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
+ grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
+
+ # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
+ ;;
+ "controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
+ NGINX_INSTALL_SOURCE="install_from_repo"
+ # States
+ if [ "${R}" = "workbench" ]; then
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ if grep -q " - nginx$" ${S_DIR}/top.sls; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
+ else
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ fi
+ else
+ grep -q "nginx" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
+ fi
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
+ grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
+ fi
+ grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ else
+ # Use custom certs, special case for keepweb
+ if [ ${R} = "keepweb" ]; then
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} download
+ copy_custom_cert ${CUSTOM_CERTS_DIR} collections
+ fi
+ else
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
+ fi
+ fi
+ fi
+ # webshell role is just a nginx vhost, so it has no state
+ if [ "${R}" != "webshell" ]; then
+ grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ fi
+ # Pillars
+ grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
+ grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
+ # Special case for keepweb
+ if [ ${R} = "keepweb" ]; then
+ grep -q "nginx_download_configuration" ${P_DIR}/top.sls || echo " - nginx_download_configuration" >> ${P_DIR}/top.sls
+ grep -q "nginx_collections_configuration" ${P_DIR}/top.sls || echo " - nginx_collections_configuration" >> ${P_DIR}/top.sls
+ fi
+
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
+ fi
+ grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
+ grep -q "letsencrypt_${R}_configuration" ${P_DIR}/top.sls || echo " - letsencrypt_${R}_configuration" >> ${P_DIR}/top.sls
+
+ # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
+ # Special case for keepweb
+ if [ ${R} = "keepweb" ]; then
+ for kwsub in download collections; do
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${kwsub}.${CLUSTER}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${kwsub}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ ${P_DIR}/nginx_${kwsub}_configuration.sls
+ done
+ else
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${R}.${CLUSTER}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${R}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ ${P_DIR}/nginx_${R}_configuration.sls
+ fi
+ else
+ # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
+ # Special case for keepweb
+ if [ ${R} = "keepweb" ]; then
+ for kwsub in download collections; do
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${kwsub}.pem/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${kwsub}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${kwsub}.key#g" \
+ ${P_DIR}/nginx_${kwsub}_configuration.sls
+ grep -q ${kwsub} ${P_DIR}/extra_custom_certs.sls || echo " - ${kwsub}" >> ${P_DIR}/extra_custom_certs.sls
+ done
+ else
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${R}.pem/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
+ ${P_DIR}/nginx_${R}_configuration.sls
+ grep -q ${R}$ ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
+ fi
+ fi
+ # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
+ ;;
+ "shell")
+ # States
+ echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+ echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
+ grep -q "docker" ${S_DIR}/top.sls || echo " - docker.software" >> ${S_DIR}/top.sls
+ grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ # Pillars
+ grep -q "docker" ${P_DIR}/top.sls || echo " - docker" >> ${P_DIR}/top.sls
+ ;;
+ "dispatcher" | "keepbalance" | "keepstore")
+ # States
+ grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
+ # Pillars
+ # ATM, no specific pillar needed
+ ;;
+ *)
+ echo "Unknown role ${R}"
+ exit 1
+ ;;
+ esac
+ done
fi
-echo '\pset pager off' >> /root/.psqlrc
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
+if [ "${DUMP_CONFIG}" = "yes" ]; then
+ # We won't run the rest of the script because we're just dumping the config
+ exit 0
+fi
# Now run the install
salt-call --local state.apply -l ${LOG_LEVEL}
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ "x${DELETE_PSQL}" = "xyes" ]; then
- echo "Removing .psql file"
- rm /root/.psqlrc
+# Finally, make sure that /etc/hosts is not overwritten on reboot
+if [ -d /etc/cloud/cloud.cfg.d ]; then
+ # TODO: will this work on CentOS?
+ sed -i 's/^manage_etc_hosts: true/#manage_etc_hosts: true/g' /etc/cloud/cloud.cfg.d/*
fi
-if [ "x${RESTORE_PSQL}" = "xyes" ]; then
- echo "Restoring .psql file"
- mv -v /root/.psqlrc.provision.backup /root/.psqlrc
-fi
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
+# Leave a copy of the Arvados CA so the user can copy it where it's required
+if [ "$DEV_MODE" = "yes" ]; then
+ ARVADOS_SNAKEOIL_CA_DEST_FILE="${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
-# If running in a vagrant VM, add default user to docker group
-if [ "x${VAGRANT}" = "xyes" ]; then
- usermod -a -G docker vagrant
+ # If running in a vagrant VM, also add default user to docker group
+ if [ "x${VAGRANT}" = "xyes" ]; then
+ echo "Adding the vagrant user to the docker group"
+ usermod -a -G docker vagrant
+ ARVADOS_SNAKEOIL_CA_DEST_FILE="/vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
+ fi
+ if [ -f /etc/ssl/certs/arvados-snakeoil-ca.pem ]; then
+ echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
+ cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${ARVADOS_SNAKEOIL_CA_DEST_FILE}
+ fi
fi
# Test that the installation finished correctly
if [ "x${TEST}" = "xyes" ]; then
- cd /tmp/cluster_tests
- ./run-test.sh
+ cd ${T_DIR}
+ # If we use RVM, we need to run this with it, or most ruby commands will fail
+ RVM_EXEC=""
+ if [ -x /usr/local/rvm/bin/rvm-exec ]; then
+ RVM_EXEC="/usr/local/rvm/bin/rvm-exec"
+ fi
+ ${RVM_EXEC} ./run-test.sh
fi