+// Copyright (C) The Arvados Authors. All rights reserved.
+//
+// SPDX-License-Identifier: AGPL-3.0
+
// Load tab panes on demand. See app/views/application/_content.html.erb
-// Fire when a tab is selected/clicked. Check whether the content in
-// the corresponding pane is loaded (or is being loaded). If not,
-// start an AJAX request to load the content.
-$(document).on('shown.bs.tab', '[data-toggle="tab"]', function(e) {
- var content_url = $(e.target).attr('data-pane-content-url');
- var $pane = $($(e.target).attr('href'));
- if ($pane.hasClass('loaded'))
+// Fire when a tab is selected/clicked.
+$(document).on('shown.bs.tab', '[data-toggle="tab"]', function(event) {
+ // reload the pane (unless it's already loaded)
+ $($(event.target).attr('href')).
+ not('.pane-loaded').
+ trigger('arv:pane:reload');
+});
+
+// Ask a refreshable pane to reload via ajax.
+//
+// Target of this event is the DOM element to be updated. A reload
+// consists of an AJAX call to load the "data-pane-content-url" and
+// replace the content of the target element with the retrieved HTML.
+//
+// There are four CSS classes set on the element to indicate its state:
+// pane-loading, pane-stale, pane-loaded, pane-reload-pending
+//
+// There are five states based on the presence or absence of css classes:
+//
+// 1. Absence of any pane-* states means the pane is empty, and should
+// be loaded as soon as it becomes visible.
+//
+// 2. "pane-loading" means an AJAX call has been made to reload the
+// pane and we are waiting on a result.
+//
+// 3. "pane-loading pane-stale" means the pane is loading, but has
+// already been invalidated and should schedule a reload as soon as
+// possible after the current load completes. (This happens when there
+// is a cluster of events, where the reload is triggered by the first
+// event, but we want ensure that we eventually load the final
+// quiescent state).
+//
+// 4. "pane-loaded" means the pane is up to date.
+//
+// 5. "pane-loaded pane-reload-pending" means a reload is needed, and
+// has been scheduled, but has not started because the pane's
+// minimum-time-between-reloads throttle has not yet been reached.
+//
+$(document).on('arv:pane:reload', '[data-pane-content-url]', function(e) {
+ if (this != e.target) {
+ // An arv:pane:reload event was sent to an element (e.target)
+ // which happens to have an ancestor (this) matching the above
+ // '[data-pane-content-url]' selector. This happens because
+ // events bubble up the DOM on their way to document. However,
+ // here we only care about events delivered directly to _this_
+ // selected element (i.e., this==e.target), not ones delivered
+ // to its children. The event "e" is uninteresting here.
+ return;
+ }
+
+ // $pane, the event target, is an element whose content is to be
+ // replaced. Pseudoclasses on $pane (pane-loading, etc) encode the
+ // current loading state.
+ var $pane = $(this);
+
+ if ($pane.hasClass('pane-loading')) {
+ // Already loading, mark stale to schedule a reload after this one.
+ $pane.addClass('pane-stale');
+ return;
+ }
+
+ // The default throttle (mininum milliseconds between refreshes)
+ // can be overridden by an .arv-log-refresh-control element inside
+ // the pane -- or, failing that, the pane element itself -- with a
+ // data-load-throttle attribute. This allows the server to adjust
+ // the throttle depending on the pane content.
+ var throttle =
+ $pane.find('.arv-log-refresh-control').attr('data-load-throttle') ||
+ $pane.attr('data-load-throttle') ||
+ 15000;
+ var now = (new Date()).getTime();
+ var loaded_at = $pane.attr('data-loaded-at');
+ var since_last_load = now - loaded_at;
+ if (loaded_at && (since_last_load < throttle)) {
+ if (!$pane.hasClass('pane-reload-pending')) {
+ $pane.addClass('pane-reload-pending');
+ setTimeout((function() {
+ $pane.trigger('arv:pane:reload');
+ }), throttle - since_last_load);
+ }
+ return;
+ }
+
+ // We know this doesn't have 'pane-loading' because we tested for it above
+ $pane.removeClass('pane-reload-pending');
+ $pane.removeClass('pane-loaded');
+ $pane.removeClass('pane-stale');
+
+ if (!$pane.hasClass('active') &&
+ $pane.parent().hasClass('tab-content')) {
+ // $pane is one of the content areas in a bootstrap tabs
+ // widget, and it isn't the currently selected tab. If and
+ // when the user does select the corresponding tab, it will
+ // get a shown.bs.tab event, which will invoke this reload
+ // function again (see handler above). For now, we just insert
+ // a spinner, which will be displayed while the new content is
+ // loading.
+ $pane.html('<div class="spinner spinner-32px spinner-h-center"></div>');
return;
+ }
+
+ $pane.addClass('pane-loading');
+
+ var content_url = $pane.attr('data-pane-content-url');
$.ajax(content_url, {dataType: 'html', type: 'GET', context: $pane}).
done(function(data, status, jqxhr) {
- $('> div > div', this).html(data);
- $(this).addClass('loaded');
- $(this).trigger('arv:pane:loaded');
+ var $pane = this;
+ // Preserve collapsed state
+ var collapsable = {};
+ $(".collapse", this).each(function(i, c) {
+ collapsable[c.id] = $(c).hasClass('in');
+ });
+ var tmp = $(data);
+ $(".collapse", tmp).each(function(i, c) {
+ if (collapsable[c.id]) {
+ $(c).addClass('in');
+ } else {
+ $(c).removeClass('in');
+ }
+ });
+ $pane.html(tmp);
+ $pane.removeClass('pane-loading');
+ $pane.addClass('pane-loaded');
+ $pane.attr('data-loaded-at', (new Date()).getTime());
+ $pane.trigger('arv:pane:loaded', [$pane]);
+
+ if ($pane.hasClass('pane-stale')) {
+ $pane.trigger('arv:pane:reload');
+ }
}).fail(function(jqxhr, status, error) {
+ var $pane = this;
var errhtml;
- if (jqxhr.getResponseHeader('Content-Type').match(/\btext\/html\b/)) {
+ var contentType = jqxhr.getResponseHeader('Content-Type');
+ if (jqxhr.readyState == 0 || jqxhr.status == 0) {
+ if ($pane.attr('data-loaded-at') > 0) {
+ // Stale content is already present. Leave it
+ // there while loading the next page.
+ $pane.removeClass('pane-loading');
+ $pane.addClass('pane-loaded');
+ // ...but schedule another refresh (after a
+ // throttle delay) in case the act of navigating
+ // away gets cancelled itself, leaving this page
+ // with content that we know is stale.
+ $pane.addClass('pane-stale');
+ $pane.attr('data-loaded-at', (new Date()).getTime());
+ $pane.trigger('arv:pane:reload');
+ return;
+ }
+ errhtml = "Cancelled.";
+ } else if (contentType && contentType.match(/\btext\/html\b/)) {
var $response = $(jqxhr.responseText);
var $wrapper = $('div#page-wrapper', $response);
if ($wrapper.length) {
replace(/</g, '<').
replace(/>/g, '>');
}
- $('> div > div', this).html(
- '<div><p>' +
- '<a href="#" class="btn btn-primary tab_reload">' +
- '<i class="fa fa-fw fa-refresh"></i> ' +
- 'Reload tab</a></p><iframe></iframe></div>');
- $('.tab_reload', this).click(function() {
- $('> div > div', $pane).html(
- '<div class="spinner spinner-32px spinner-h-center"></div>');
- $pane.trigger('arv:pane:reload');
+ $pane.html('<div class="pane-error-display"><p>' +
+ '<a href="#" class="btn btn-primary tab_reload">' +
+ '<i class="fa fa-fw fa-refresh"></i> ' +
+ 'Reload tab</a></p><iframe style="width: 100%"></iframe></div>');
+ $('.tab_reload', $pane).click(function() {
+ $(this).
+ html('<div class="spinner spinner-32px spinner-h-center"></div>').
+ closest('.pane-loaded').
+ attr('data-loaded-at', 0).
+ trigger('arv:pane:reload');
});
// We want to render the error in an iframe, in order to
// avoid conflicts with the main page's element ids, etc.
// In order to do that dynamically, we have to set a
// timeout on the iframe window to load our HTML *after*
// the default source (e.g., about:blank) has loaded.
- var iframe = $('iframe', this)[0];
+ var iframe = $('iframe', $pane)[0];
iframe.contentWindow.setTimeout(function() {
$('body', iframe.contentDocument).html(errhtml);
iframe.height = iframe.contentDocument.body.scrollHeight + "px";
}, 1);
- $(this).addClass('loaded');
+ $pane.removeClass('pane-loading');
+ $pane.addClass('pane-loaded');
});
});
-// Fire when the content in a tab pane becomes stale/dirty. If the
-// pane is visible now, reload it right away. Otherwise, just replace
-// the current content with a spinner for now: there's no need to load
-// the new content unless/until the user clicks the corresponding tab.
-$(document).on('arv:pane:reload', '.tab-pane', function() {
- // Unload a single pane. Reload it if it's active.
- $(this).removeClass('loaded');
- if ($(this).hasClass('active')) {
- $('[href=#' + $(this).attr('id') + ']').trigger('shown.bs.tab');
- } else {
- // When the user selects this tab, show a spinner instead of
- // old content while loading.
- $('> div > div', this).
- html('<div class="spinner spinner-32px spinner-h-center"></div>');
+// Mark all panes as stale/dirty. Refresh any 'active' panes.
+$(document).on('arv:pane:reload:all', function() {
+ $('[data-pane-content-url]').trigger('arv:pane:reload');
+});
+
+$(document).on('arv-log-event', '.arv-refresh-on-log-event', function(event) {
+ if (this != event.target) {
+ // Not interested in events sent to child nodes.
+ return;
}
+ // Panes marked arv-refresh-on-log-event should be refreshed
+ $(event.target).trigger('arv:pane:reload');
});
-// Mark all panes as stale/dirty. Refresh the active pane.
-$(document).on('arv-log-event arv:pane:reload:all', function() {
- $('.tab-pane.loaded').trigger('arv:pane:reload');
+// If there is a 'tab counts url' in the nav-tabs element then use it to get some javascript that will update them
+$(document).on('ready count-change', function() {
+ var tabCountsUrl = $('ul.nav-tabs').data('tab-counts-url');
+ if( tabCountsUrl && tabCountsUrl.length ) {
+ $.get( tabCountsUrl );
+ }
});