# Maximum number of concurrent requests to process concurrently
# in a single service process, or 0 for no limit.
- MaxConcurrentRequests: 8
+ #
+ # Note this applies to all Arvados services (controller, webdav,
+ # websockets, etc.). Concurrency in the controller service is
+ # also effectively limited by MaxConcurrentRailsRequests (see
+ # below) because most controller requests proxy through to the
+ # RailsAPI service.
+ #
+ # HTTP proxies and load balancers downstream of arvados services
+ # should be configured to allow at least {MaxConcurrentRequest +
+ # MaxQueuedRequests + MaxGatewayTunnels} concurrent requests.
+ MaxConcurrentRequests: 64
+
+ # Maximum number of concurrent requests to process concurrently
+ # in a single RailsAPI service process, or 0 for no limit.
+ MaxConcurrentRailsRequests: 8
# Maximum number of incoming requests to hold in a priority
# queue waiting for one of the MaxConcurrentRequests slots to be
# the incoming request queue before returning 503.
MaxQueueTimeForLockRequests: 2s
+ # Maximum number of active gateway tunnel connections. One slot
+ # is consumed by each "container shell" connection. If using an
+ # HPC dispatcher (LSF or Slurm), one slot is consumed by each
+ # running container. These do not count toward
+ # MaxConcurrentRequests.
+ MaxGatewayTunnels: 1000
+
# Fraction of MaxConcurrentRequests that can be "log create"
# messages at any given time. This is to prevent logging
# updates from crowding out more important requests.
# false.
ActivatedUsersAreVisibleToOthers: true
- # The e-mail address of the user you would like to become marked as an admin
- # user on their first login.
+ # If a user creates an account with this email address, they
+ # will be automatically set to admin.
AutoAdminUserWithEmail: ""
# If AutoAdminFirstUser is set to true, the first user to log in when no
# other admin users exist will automatically become an admin user.
AutoAdminFirstUser: false
- # Email address to notify whenever a user creates a profile for the
- # first time
+ # Recipient for notification email sent out when a user sets a
+ # profile on their account.
UserProfileNotificationAddress: ""
+
+ # When sending a NewUser, NewInactiveUser, or UserProfile
+ # notification, this is the 'From' address to use
AdminNotifierEmailFrom: arvados@example.com
+
+ # Prefix for email subjects for NewUser and NewInactiveUser emails
EmailSubjectPrefix: "[ARVADOS] "
+
+ # When sending a welcome email to the user, the 'From' address to use
UserNotifierEmailFrom: arvados@example.com
- UserNotifierEmailBcc: {}
- NewUserNotificationRecipients: {}
- NewInactiveUserNotificationRecipients: {}
+
+ # The welcome email sent to new users will be blind copied to
+ # these addresses.
+ UserNotifierEmailBcc:
+ SAMPLE: {}
+
+ # Recipients for notification email sent out when a user account
+ # is created and already set up to be able to log in
+ NewUserNotificationRecipients:
+ SAMPLE: {}
+
+ # Recipients for notification email sent out when a user account
+ # has been created but the user cannot log in until they are
+ # set up by an admin.
+ NewInactiveUserNotificationRecipients:
+ SAMPLE: {}
# Set AnonymousUserToken to enable anonymous user access. Populate this
# field with a random string at least 50 characters long.
AnonymousUserToken: ""
- # If a new user has an alternate email address (local@domain)
- # with the domain given here, its local part becomes the new
- # user's default username. Otherwise, the user's primary email
- # address is used.
+ # The login provider for a user may supply a primary email
+ # address and one or more alternate email addresses. If a new
+ # user has an alternate email address with the domain given
+ # here, use the username from the alternate email to generate
+ # the user's Arvados username. Otherwise, the username from
+ # user's primary email address is used for the Arvados username.
+ # Currently implemented for OpenID Connect only.
PreferDomainForUsername: ""
+ # Ruby ERB template used for the email sent out to users when
+ # they have been set up.
UserSetupMailText: |
<% if not @user.full_name.empty? -%>
<%= @user.full_name %>,
# once.
BalanceUpdateLimit: 100000
+ # Maximum number of "pull block from other server" and "trash
+ # block" requests to send to each keepstore server at a
+ # time. Smaller values use less memory in keepstore and
+ # keep-balance. Larger values allow more progress per
+ # keep-balance iteration. A zero value computes all of the
+ # needed changes but does not apply any.
+ BalancePullLimit: 100000
+ BalanceTrashLimit: 100000
+
# Default lifetime for ephemeral collections: 2 weeks. This must not
# be less than BlobSigningTTL.
DefaultTrashLifetime: 336h
# Time to cache manifests, permission checks, and sessions.
TTL: 300s
- # Block cache entries. Each block consumes up to 64 MiB RAM.
- MaxBlockEntries: 20
+ # Maximum amount of data cached in /var/cache/arvados/keep.
+ # Can be given as a percentage ("10%") or a number of bytes
+ # ("10 GiB")
+ DiskCacheSize: 10%
# Approximate memory limit (in bytes) for session cache.
#
# Note this applies to the in-memory representation of
# projects and collections -- metadata, block locators,
- # filenames, etc. -- excluding cached file content, which is
- # limited by MaxBlockEntries.
- MaxCollectionBytes: 100000000
+ # filenames, etc. -- not the file data itself (see
+ # DiskCacheSize).
+ MaxCollectionBytes: 100 MB
# Persistent sessions.
MaxSessions: 100
# A price factor of 1.0 is a reasonable starting point.
PreemptiblePriceFactor: 0
+ # When the lowest-priced instance type for a given container is
+ # not available, try other instance types, up to the indicated
+ # maximum price factor.
+ #
+ # For example, with AvailabilityPriceFactor 1.5, if the
+ # lowest-cost instance type A suitable for a given container
+ # costs $2/h, Arvados may run the container on any instance type
+ # B costing $3/h or less when instance type A is not available
+ # or an idle instance of type B is already running.
+ MaximumPriceFactor: 1.5
+
# PEM encoded SSH key (RSA, DSA, or ECDSA) used by the
# cloud dispatcher for executing containers on worker VMs.
# Begins with "-----BEGIN RSA PRIVATE KEY-----\n"
ReadOnly: false
"http://host1.example:25107": {}
ReadOnly: false
+ # AllowTrashWhenReadOnly enables unused and overreplicated
+ # blocks to be trashed/deleted even when ReadOnly is
+ # true. Normally, this is false and ReadOnly prevents all
+ # trash/delete operations as well as writes.
+ AllowTrashWhenReadOnly: false
Replication: 1
StorageClasses:
# If you have configured storage classes (see StorageClasses
Serialize: false
Mail:
- MailchimpAPIKey: ""
- MailchimpListID: ""
+ # In order to send mail, Arvados expects a default SMTP server
+ # on localhost:25. It cannot require authentication on
+ # connections from localhost. That server should be configured
+ # to relay mail to a "real" SMTP server that is able to send
+ # email on behalf of your domain.
+
+ # See also the "Users" configuration section for additional
+ # email-related options.
+
+ # When a user has been set up (meaning they are able to log in)
+ # they will receive an email using the template specified
+ # earlier in Users.UserSetupMailText
SendUserSetupNotificationEmail: true
# Bug/issue report notification to and from addresses
# Generic issue email from
EmailFrom: "arvados@example.com"
+
+ # No longer supported, to be removed.
+ MailchimpAPIKey: ""
+ MailchimpListID: ""
RemoteClusters:
"*":
Host: ""
ArvadosDocsite: https://doc.arvados.org
ArvadosPublicDataDocURL: https://playground.arvados.org/projects/public
ShowUserAgreementInline: false
- SecretKeyBase: ""
# Set this configuration to true to avoid providing an easy way for users
# to share data with unauthenticated users; this may be necessary on
# installations where strict data access controls are needed.
DisableSharingURLsUI: false
- # Scratch directory used by the remote repository browsing
- # feature. If it doesn't exist, it (and any missing parents) will be
- # created using mkdir_p.
- RepositoryCache: /var/www/arvados-workbench/current/tmp/git
-
# Below is a sample setting of user_profile_form_fields config parameter.
# This configuration parameter should be set to either false (to disable) or
# to a map as shown below.
# to display on the profile page.
UserProfileFormMessage: 'Welcome to Arvados. All <span style="color:red">required fields</span> must be completed before you can proceed.'
- # Mimetypes of applications for which the view icon
- # would be enabled in a collection's show page.
- # It is sufficient to list only applications here.
- # No need to list text and image types.
- ApplicationMimetypesWithViewIcon:
- cwl: {}
- fasta: {}
- go: {}
- javascript: {}
- json: {}
- pdf: {}
- python: {}
- x-python: {}
- r: {}
- rtf: {}
- sam: {}
- x-sh: {}
- vnd.realvnc.bed: {}
- xml: {}
- xsl: {}
- SAMPLE: {}
-
- # The maximum number of bytes to load in the log viewer
- LogViewerMaxBytes: 1M
-
- # When anonymous_user_token is configured, show public projects page
- EnablePublicProjectsPage: true
-
- # By default, disable the "Getting Started" popup which is specific to Arvados playground
- EnableGettingStartedPopup: false
-
- # Ask Arvados API server to compress its response payloads.
- APIResponseCompression: true
-
- # Timeouts for API requests.
- APIClientConnectTimeout: 2m
- APIClientReceiveTimeout: 5m
-
- # Maximum number of historic log records of a running job to fetch
- # and display in the Log tab, while subscribing to web sockets.
- RunningJobLogRecordsToFetch: 2000
-
- # In systems with many shared projects, loading of dashboard and topnav
- # can be slow due to collections indexing; use the following parameters
- # to suppress these properties
- ShowRecentCollectionsOnDashboard: true
- ShowUserNotifications: true
-
- # Enable/disable "multi-site search" in top nav ("true"/"false"), or
- # a link to the multi-site search page on a "home" Workbench site.
- #
- # Example:
- # https://workbench.zzzzz.arvadosapi.com/collections/multisite
- MultiSiteSearch: ""
-
- # Should workbench allow management of local git repositories? Set to false if
- # the jobs api is disabled and there are no local git repositories.
- Repositories: true
-
SiteName: Arvados Workbench
- ProfilingEnabled: false
-
- # This is related to obsolete Google OpenID 1.0 login
- # but some workbench stuff still expects it to be set.
- DefaultOpenIdPrefix: "https://www.google.com/accounts/o8/id"
# Workbench2 configs
FileViewersConfigURL: ""
projects / arvados.git / blobdiff