echo >&2 " controller"
echo >&2 " dispatcher"
echo >&2 " keepproxy"
+ echo >&2 " keepbalance"
echo >&2 " keepstore"
echo >&2 " keepweb"
+ echo >&2 " monitoring"
echo >&2 " shell"
echo >&2 " webshell"
echo >&2 " websocket"
echo >&2 " -h, --help Display this help and exit"
echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
echo >&2 " This parameter does not perform any installation at all. It's"
- echo >&2 " intended to give you a parsed sot of configuration files so"
+ echo >&2 " intended to give you a parsed set of configuration files so"
echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
echo >&2 " It"
echo >&2 " - parses the pillar and states templates,"
echo >&2 " - downloads the helper formulas with their desired versions,"
echo >&2 " - prepares the 'top.sls' files both for pillars and states"
- echo >&2 " for the selected role/s"
+ echo >&2 " for the selected role(s)"
echo >&2 " - writes the resulting files into <dest_dir>"
echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
echo >&2 " --development Run in dev mode, using snakeoil certs"
for i in ${2//,/ }
do
# Verify the role exists
- if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepproxy,shell,workbench,dispatcher" == *"$i"* ]]; then
+ if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher,monitoring" == *"$i"* ]]; then
echo "The role '${i}' is not a valid role"
usage
exit 1
cert_dir=${1}
cert_name=${2}
- mkdir -p /srv/salt/certs
+ mkdir -p --mode=0700 /srv/salt/certs
if [ -f ${cert_dir}/${cert_name}.crt ]; then
- cp -v ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
+ install --mode=0600 ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
else
echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
exit 1
fi
if [ -f ${cert_dir}/${cert_name}.key ]; then
- cp -v ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
+ install --mode=0600 ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
else
echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
exit 1
CONTROLLER_EXT_SSL_PORT=443
TESTS_DIR="tests"
+NGINX_INSTALL_SOURCE="install_from_repo"
+
CLUSTER=""
DOMAIN=""
# Hostnames/IPs used for single-host deploys
-HOSTNAME_EXT=""
IP_INT="127.0.1.1"
# Initial user setup
WORKBENCH2_EXT_SSL_PORT=3001
SSL_MODE="self-signed"
-CUSTOM_CERTS_DIR="${SCRIPT_DIR}/certs"
+USE_LETSENCRYPT_ROUTE53="no"
+CUSTOM_CERTS_DIR="${SCRIPT_DIR}/local_config_dir/certs"
+
+GRAFANA_DASHBOARDS_DIR="${SCRIPT_DIR}/local_config_dir/dashboards"
## These are ARVADOS-related parameters
# For a stable release, change RELEASE "production" and VERSION to the
# ARVADOS_TAG="2.2.0"
# BRANCH="main"
+# We pin the salt version to avoid potential incompatibilities when a new
+# stable version is released.
+SALT_VERSION="3004"
+
# Other formula versions we depend on
-POSTGRES_TAG="v0.43.0"
-NGINX_TAG="temp-fix-missing-statements-in-pillar"
-DOCKER_TAG="v2.0.7"
+#POSTGRES_TAG="v0.44.0"
+#POSTGRES_URL="https://github.com/saltstack-formulas/postgres-formula.git"
+POSTGRES_TAG="0.45.0-bugfix327"
+POSTGRES_URL="https://github.com/arvados/postgres-formula.git"
+NGINX_TAG="v2.8.1"
+DOCKER_TAG="v2.4.2"
LOCALE_TAG="v0.3.4"
LETSENCRYPT_TAG="v2.1.0"
+LOGROTATE_TAG="v0.14.0"
+PROMETHEUS_TAG="v5.6.5"
+GRAFANA_TAG="v3.1.3"
# Salt's dir
DUMP_SALT_CONFIG_DIR=""
arguments ${@}
+declare -A NODES
+
if [ -s ${CONFIG_FILE} ]; then
source ${CONFIG_FILE}
else
exit 1
fi
-if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
+if grep -rni 'fixme' ${CONFIG_FILE} ${CONFIG_DIR} ; then
echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
echo >&2 "Please, fix them and re-run the provision script."
exit 1
fi
if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
- echo >&2 "ERROR: <CLUSTER> must be exactly 5 alphanumeric characters long"
+ echo >&2 "ERROR: <CLUSTER> must be exactly 5 lowercase alphanumeric characters long"
echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
exit 1
fi
# Only used in single_host/single_name deploys
-if [ "x${HOSTNAME_EXT}" = "x" ] ; then
+if [ ! -z "${HOSTNAME_EXT}" ] ; then
+ # We need to add some extra control vars to manage a single certificate vs. multiple
+ USE_SINGLE_HOSTNAME="yes"
+ # Make sure that the value configured as IP_INT is a real IP on the system.
+ # If we don't error out early here when there is a mismatch, the formula will
+ # fail with hard to interpret nginx errors later on.
+ ip addr list |grep "${IP_INT}/" >/dev/null
+ if [[ $? -ne 0 ]]; then
+ echo "Unable to find the IP_INT address '${IP_INT}' on the system, please correct the value in local.params. Exiting..."
+ exit 1
+ fi
+else
+ USE_SINGLE_HOSTNAME="no"
+ # We set this variable, anyway, so sed lines do not fail and we don't need to add more
+ # conditionals
HOSTNAME_EXT="${CLUSTER}.${DOMAIN}"
fi
case ${OS_ID} in
"centos")
echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
- sed -i 's/SELINUX=enforcing/SELINUX=permissive' /etc/sysconfig/selinux
+ sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
setenforce permissive
yum install -y curl git jq
;;
"debian"|"ubuntu")
- DEBIAN_FRONTEND=noninteractive apt update
+ # Wait 2 minutes for any apt locks to clear
+ # This option is supported from apt 1.9.1 and ignored in older apt versions.
+ # Cf. https://blog.sinjakli.co.uk/2021/10/25/waiting-for-apt-locks-without-the-hacky-bash-scripts/
+ DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
;;
esac
echo "Salt already installed"
else
curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
- sh /tmp/bootstrap_salt.sh -XdfP -x python3
+ sh /tmp/bootstrap_salt.sh -XdfP -x python3 stable ${SALT_VERSION}
/bin/systemctl stop salt-minion.service
/bin/systemctl disable salt-minion.service
fi
# Get the formula and dependencies
cd ${F_DIR} || exit 1
echo "Cloning formulas"
-rm -rf ${F_DIR}/* || exit 1
-git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
-( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" -b "${DOCKER_TAG}" )
-
-git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
-( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" -b "${LOCALE_TAG}" )
-
-git clone --quiet https://github.com/netmanagers/nginx-formula.git ${F_DIR}/nginx
-( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" -b "${NGINX_TAG}" )
-
-git clone --quiet https://github.com/saltstack-formulas/postgres-formula.git ${F_DIR}/postgres
-( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" -b "${POSTGRES_TAG}" )
-
-git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
-( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" -b "${LETSENCRYPT_TAG}" )
-
-git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
+test -d docker && ( cd docker && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
+( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" )
+
+echo "...locale"
+test -d locale && ( cd locale && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
+( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" )
+
+echo "...nginx"
+test -d nginx && ( cd nginx && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
+( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" )
+
+echo "...postgres"
+test -d postgres && ( cd postgres && git fetch ) \
+ || git clone --quiet ${POSTGRES_URL} ${F_DIR}/postgres
+( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" )
+
+echo "...prometheus"
+test -d prometheus && ( cd prometheus && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/prometheus-formula.git ${F_DIR}/prometheus
+( cd prometheus && git checkout --quiet tags/"${PROMETHEUS_TAG}" )
+
+echo "...grafana"
+test -d grafana && ( cd grafana && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/grafana-formula.git ${F_DIR}/grafana
+( cd grafana && git checkout --quiet "${GRAFANA_TAG}" )
+
+echo "...letsencrypt"
+test -d letsencrypt && ( cd letsencrypt && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
+( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" )
+
+echo "...logrotate"
+test -d logrotate && ( cd logrotate && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/logrotate-formula.git ${F_DIR}/logrotate
+( cd logrotate && git checkout --quiet tags/"${LOGROTATE_TAG}" )
+
+echo "...arvados"
+test -d arvados || git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
# If we want to try a specific branch of the formula
if [ "x${BRANCH}" != "x" ]; then
( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
elif [ "x${ARVADOS_TAG}" != "x" ]; then
-( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
+ ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
fi
if [ "x${VAGRANT}" = "xyes" ]; then
s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
- s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
- s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
+ s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g;
+ s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
+ s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION}#g;
+ s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g;
+ s#__MONITORING_USERNAME__#${MONITORING_USERNAME}#g;
+ s#__MONITORING_EMAIL__#${MONITORING_EMAIL}#g;
+ s#__MONITORING_PASSWORD__#${MONITORING_PASSWORD}#g" \
"${f}" > "${P_DIR}"/$(basename "${f}")
done
-if [ "x${TEST}" = "xyes" ] && [ ! -d "${SOURCE_TESTS_DIR}" ]; then
- echo "You requested to run tests, but ${SOURCE_TESTS_DIR} does not exist or is not a directory. Exiting."
- exit 1
+if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
+ echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
+ if [ "x${TEST}" = "xyes" ]; then
+ echo "WARNING: Disabling tests for this installation."
+ fi
+ TEST="no"
+else
+ mkdir -p ${T_DIR}
+ # Replace cluster and domain name in the test files
+ for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
+ FILTERS="s#__CLUSTER__#${CLUSTER}#g;
+ s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+ s#__DOMAIN__#${DOMAIN}#g;
+ s#__IP_INT__#${IP_INT}#g;
+ s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+ s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
+ s#__INITIAL_USER__#${INITIAL_USER}#g;
+ s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+ s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
+ if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
+ FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
+ $FILTERS"
+ fi
+ sed "$FILTERS" \
+ "${f}" > ${T_DIR}/$(basename "${f}")
+ done
+ chmod 755 ${T_DIR}/run-test.sh
fi
-mkdir -p ${T_DIR}
-# Replace cluster and domain name in the test files
-for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
- sed "s#__CLUSTER__#${CLUSTER}#g;
- s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
- s#__DOMAIN__#${DOMAIN}#g;
- s#__IP_INT__#${IP_INT}#g;
- s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
- s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
- s#__INITIAL_USER__#${INITIAL_USER}#g;
- s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
- s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g" \
- "${f}" > ${T_DIR}/$(basename "${f}")
-done
-chmod 755 ${T_DIR}/run-test.sh
# Replace helper state files that differ from the formula's examples
if [ -d "${SOURCE_STATES_DIR}" ]; then
mkdir -p "${F_DIR}"/extra/extra
+ rm -f "${F_DIR}"/extra/extra/*
for f in $(ls "${SOURCE_STATES_DIR}"/*); do
sed "s#__ANONYMOUS_USER_TOKEN__#${ANONYMOUS_USER_TOKEN}#g;
s#__WEBSOCKET_INT_IP__#${WEBSOCKET_INT_IP}#g;
s#__KEEP_INT_IP__#${KEEP_INT_IP}#g;
s#__KEEPSTORE0_INT_IP__#${KEEPSTORE0_INT_IP}#g;
- s#__KEEPSTORE1_INT_IP__#${KEEPSTORE1_INT_IP}#g;
s#__KEEPWEB_INT_IP__#${KEEPWEB_INT_IP}#g;
s#__WEBSHELL_INT_IP__#${WEBSHELL_INT_IP}#g;
s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
+ s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
- s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
+ s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g;
+ s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
+ s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION}#g;
+ s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g;
+ s#__MONITORING_USERNAME__#${MONITORING_USERNAME}#g;
+ s#__MONITORING_EMAIL__#${MONITORING_EMAIL}#g;
+ s#__MONITORING_PASSWORD__#${MONITORING_PASSWORD}#g" \
"${f}" > "${F_DIR}/extra/extra"/$(basename "${f}")
done
fi
# States, extra states
if [ -d "${F_DIR}"/extra/extra ]; then
SKIP_SNAKE_OIL="snakeoil_certs"
+
if [[ "$DEV_MODE" = "yes" || "${SSL_MODE}" == "self-signed" ]] ; then
# In dev mode, we create some snake oil certs that we'll
# use as CUSTOM_CERTS, so we don't skip the states file.
# Same when using self-signed certificates.
- SKIP_SNAKE_OIL="dont_snakeoil_certs"
+ SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
fi
- for f in $(ls "${F_DIR}"/extra/extra/*.sls | grep -v ${SKIP_SNAKE_OIL}); do
+ for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
done
# Use byo or self-signed certificates
if [ -z "${ROLES}" ]; then
# States
echo " - nginx.passenger" >> ${S_DIR}/top.sls
- # Currently, only available on config_examples/multi_host/aws
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
- if [ "${USE_LETSENCRYPT_IAM_USER}" != "yes" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - extra.aws_credentials" >> ${S_DIR}/top.sls
fi
- grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
else
- # Use custom certs
- # Copy certs to formula extra/files
- # In dev mode, the files will be created and put in the destination directory by the
- # snakeoil_certs.sls state file
- mkdir -p /srv/salt/certs
- cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
- # We add the custom_certs state
- grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ mkdir -p --mode=0700 /srv/salt/certs
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ # Copy certs to formula extra/files
+ install --mode=0600 ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
+ # We add the custom_certs state
+ grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
+ grep -q "ssl_key_encrypted" ${S_DIR}/top.sls || echo " - extra.ssl_key_encrypted" >> ${S_DIR}/top.sls
+ fi
+ fi
+ # In self-signed mode, the certificate files will be created and put in the
+ # destination directory by the snakeoil_certs.sls state file
fi
echo " - postgres" >> ${S_DIR}/top.sls
+ echo " - logrotate" >> ${S_DIR}/top.sls
echo " - docker.software" >> ${S_DIR}/top.sls
echo " - arvados" >> ${S_DIR}/top.sls
- echo " - extra.dns" >> ${S_DIR}/top.sls
+ echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+ echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
+ echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
# Pillars
echo " - docker" >> ${P_DIR}/top.sls
echo " - nginx_api_configuration" >> ${P_DIR}/top.sls
+ echo " - logrotate_api" >> ${P_DIR}/top.sls
echo " - nginx_controller_configuration" >> ${P_DIR}/top.sls
echo " - nginx_keepproxy_configuration" >> ${P_DIR}/top.sls
echo " - nginx_keepweb_configuration" >> ${P_DIR}/top.sls
echo " - nginx_webshell_configuration" >> ${P_DIR}/top.sls
echo " - nginx_workbench2_configuration" >> ${P_DIR}/top.sls
echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
+ echo " - logrotate_wb1" >> ${P_DIR}/top.sls
echo " - postgresql" >> ${P_DIR}/top.sls
- # Currently, only available on config_examples/multi_host/aws
+ # We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
+
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
- if [ "${USE_LETSENCRYPT_IAM_USER}" != "yes" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
fi
- grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
+ grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
+
+ hosts=("controller" "websocket" "workbench" "workbench2" "webshell" "keepproxy")
+ if [ ${USE_SINGLE_HOSTNAME} = "no" ]; then
+ hosts+=("download" "collections")
+ else
+ hosts+=("keepweb")
+ fi
- # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
- for c in controller websocket workbench workbench2 webshell download collections keepproxy; do
- sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${c}.${CLUSTER}.${DOMAIN}*/g;
- s#__CERT_PEM__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
- s#__CERT_KEY__#/etc/letsencrypt/live/${c}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ for c in "${hosts[@]}"; do
+ # Are we in a single-host-single-hostname env?
+ if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
+ # Are we in a single-host-single-hostname env?
+ CERT_NAME=${HOSTNAME_EXT}
+ else
+ # We are in a multiple-hostnames env
+ CERT_NAME=${c}.${CLUSTER}.${DOMAIN}
+ fi
+
+ # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${CERT_NAME}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${CERT_NAME}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${CERT_NAME}/privkey.pem#g" \
${P_DIR}/nginx_${c}_configuration.sls
done
- elif [ "${SSL_MODE}" = "bring-your-own" ]; then
- # Use custom "bring-your-own" certs (either dev mode or prod)
- grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ else
+ # Use custom certs (either dev mode or prod)
grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
# And add the certs in the custom_certs pillar
echo "extra_custom_certs_dir: /srv/salt/certs" > ${P_DIR}/extra_custom_certs.sls
echo "extra_custom_certs:" >> ${P_DIR}/extra_custom_certs.sls
- for c in controller websocket workbench workbench2 webshell download collections keepproxy; do
- copy_custom_cert ${CUSTOM_CERTS_DIR} $c
- grep -q ${c} ${P_DIR}/extra_custom_certs.sls || echo " - ${c}" >> ${P_DIR}/extra_custom_certs.sls
-
- # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
- sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${c}.pem/g;
- s#__CERT_PEM__#/etc/nginx/ssl/arvados-${c}.pem#g;
- s#__CERT_KEY__#/etc/nginx/ssl/arvados-${c}.key#g" \
+ for c in controller websocket workbench workbench2 webshell keepweb keepproxy; do
+ # Are we in a single-host-single-hostname env?
+ if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
+ # Are we in a single-host-single-hostname env?
+ CERT_NAME=${HOSTNAME_EXT}
+ else
+ # We are in a multiple-hostnames env
+ CERT_NAME=${c}
+ fi
+
+ if [[ "$SSL_MODE" == "bring-your-own" ]]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${CERT_NAME}
+ fi
+
+ grep -q ${CERT_NAME} ${P_DIR}/extra_custom_certs.sls || echo " - ${CERT_NAME}" >> ${P_DIR}/extra_custom_certs.sls
+
+ # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${CERT_NAME}.pem/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${CERT_NAME}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${CERT_NAME}.key#g" \
${P_DIR}/nginx_${c}_configuration.sls
done
fi
# If we add individual roles, make sure we add the repo first
echo " - arvados.repo" >> ${S_DIR}/top.sls
# We add the extra_custom_certs state
- grep -q "extra_custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ grep -q "extra.custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
+ grep -q "ssl_key_encrypted" ${S_DIR}/top.sls || echo " - extra.ssl_key_encrypted" >> ${S_DIR}/top.sls
+ fi
# And we add the basic part for the certs pillar
if [ "${SSL_MODE}" != "lets-encrypt" ]; then
grep -q "extra_custom_certs" ${P_DIR}/top.sls || echo " - extra_custom_certs" >> ${P_DIR}/top.sls
fi
+ # Prometheus state on all nodes due to the node exporter below
+ grep -q "\- prometheus$" ${S_DIR}/top.sls || echo " - prometheus" >> ${S_DIR}/top.sls
+ # Prometheus node exporter pillar
+ grep -q "prometheus_node_exporter" ${P_DIR}/top.sls || echo " - prometheus_node_exporter" >> ${P_DIR}/top.sls
+
for R in ${ROLES}; do
case "${R}" in
"database")
# States
- echo " - postgres" >> ${S_DIR}/top.sls
+ grep -q "\- postgres$" ${S_DIR}/top.sls || echo " - postgres" >> ${S_DIR}/top.sls
+ grep -q "extra.prometheus_pg_exporter" ${S_DIR}/top.sls || echo " - extra.prometheus_pg_exporter" >> ${S_DIR}/top.sls
# Pillars
- echo ' - postgresql' >> ${P_DIR}/top.sls
+ grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
+ grep -q "prometheus_pg_exporter" ${P_DIR}/top.sls || echo " - prometheus_pg_exporter" >> ${P_DIR}/top.sls
+ ;;
+ "monitoring")
+ ### Support files ###
+ GRAFANA_DASHBOARDS_DEST_DIR=/srv/salt/dashboards
+ mkdir -p "${GRAFANA_DASHBOARDS_DEST_DIR}"
+ rm -f "${GRAFANA_DASHBOARDS_DEST_DIR}"/*
+ # "ArvadosPromDataSource" is the hardcoded UID for Prometheus' datasource
+ # in Grafana.
+ for f in $(ls "${GRAFANA_DASHBOARDS_DIR}"/*.json); do
+ sed 's#${DS_PROMETHEUS}#ArvadosPromDataSource#g' \
+ "${f}" > "${GRAFANA_DASHBOARDS_DEST_DIR}"/$(basename "${f}")
+ done
+
+ ### States ###
+ grep -q "\- nginx$" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
+ grep -q "extra.nginx_prometheus_configuration" ${S_DIR}/top.sls || echo " - extra.nginx_prometheus_configuration" >> ${S_DIR}/top.sls
+
+ grep -q "\- grafana$" ${S_DIR}/top.sls || echo " - grafana" >> ${S_DIR}/top.sls
+ grep -q "extra.grafana_datasource" ${S_DIR}/top.sls || echo " - extra.grafana_datasource" >> ${S_DIR}/top.sls
+ grep -q "extra.grafana_dashboards" ${S_DIR}/top.sls || echo " - extra.grafana_dashboards" >> ${S_DIR}/top.sls
+ grep -q "extra.grafana_admin_user" ${S_DIR}/top.sls || echo " - extra.grafana_admin_user" >> ${S_DIR}/top.sls
+
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
+ grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
+ fi
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ for SVC in grafana prometheus; do
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${SVC}
+ done
+ fi
+ ### Pillars ###
+ grep -q "prometheus_server" ${P_DIR}/top.sls || echo " - prometheus_server" >> ${P_DIR}/top.sls
+ grep -q "grafana" ${P_DIR}/top.sls || echo " - grafana" >> ${P_DIR}/top.sls
+ for SVC in grafana prometheus; do
+ grep -q "nginx_${SVC}_configuration" ${P_DIR}/top.sls || echo " - nginx_${SVC}_configuration" >> ${P_DIR}/top.sls
+ done
+ if [ "${SSL_MODE}" = "lets-encrypt" ]; then
+ grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
+ for SVC in grafana prometheus; do
+ grep -q "letsencrypt_${SVC}_configuration" ${P_DIR}/top.sls || echo " - letsencrypt_${SVC}_configuration" >> ${P_DIR}/top.sls
+ sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${SVC}.${CLUSTER}.${DOMAIN}*/g;
+ s#__CERT_PEM__#/etc/letsencrypt/live/${SVC}.${CLUSTER}.${DOMAIN}/fullchain.pem#g;
+ s#__CERT_KEY__#/etc/letsencrypt/live/${SVC}.${CLUSTER}.${DOMAIN}/privkey.pem#g" \
+ ${P_DIR}/nginx_${SVC}_configuration.sls
+ done
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
+ grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
+ fi
+ elif [ "${SSL_MODE}" = "bring-your-own" ]; then
+ grep -q "ssl_key_encrypted" ${P_DIR}/top.sls || echo " - ssl_key_encrypted" >> ${P_DIR}/top.sls
+ for SVC in grafana prometheus; do
+ sed -i "s/__CERT_REQUIRES__/file: extra_custom_certs_file_copy_arvados-${SVC}.pem/g;
+ s#__CERT_PEM__#/etc/nginx/ssl/arvados-${SVC}.pem#g;
+ s#__CERT_KEY__#/etc/nginx/ssl/arvados-${SVC}.key#g" \
+ ${P_DIR}/nginx_${SVC}_configuration.sls
+ grep -q ${SVC} ${P_DIR}/extra_custom_certs.sls || echo " - ${SVC}" >> ${P_DIR}/extra_custom_certs.sls
+ done
+ fi
;;
"api")
# States
- # FIXME: https://dev.arvados.org/issues/17352
- grep -q "postgres.client" ${S_DIR}/top.sls || echo " - postgres.client" >> ${S_DIR}/top.sls
- grep -q "nginx.passenger" ${S_DIR}/top.sls || echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ grep -q " - logrotate" ${S_DIR}/top.sls || echo " - logrotate" >> ${S_DIR}/top.sls
+ if grep -q " - nginx.*$" ${S_DIR}/top.sls; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
+ else
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ fi
+ echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
### If we don't install and run LE before arvados-api-server, it fails and breaks everything
### after it. So we add this here as we are, after all, sharing the host for api and controller
- # Currently, only available on config_examples/multi_host/aws
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
- if [ "${USE_LETSENCRYPT_IAM_USER}" != "yes" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
fi
grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
else
# Use custom certs
- copy_custom_cert ${CUSTOM_CERTS_DIR} controller
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} controller
+ fi
grep -q controller ${P_DIR}/extra_custom_certs.sls || echo " - controller" >> ${P_DIR}/extra_custom_certs.sls
fi
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
# Pillars
+ grep -q "logrotate_api" ${P_DIR}/top.sls || echo " - logrotate_api" >> ${P_DIR}/top.sls
grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
+
+ # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
;;
"controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
# States
- grep -q "nginx.passenger" ${S_DIR}/top.sls || echo " - nginx.passenger" >> ${S_DIR}/top.sls
- # Currently, only available on config_examples/multi_host/aws
+ if [ "${R}" = "workbench" ]; then
+ grep -q " - logrotate" ${S_DIR}/top.sls || echo " - logrotate" >> ${S_DIR}/top.sls
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ if grep -q " - nginx$" ${S_DIR}/top.sls; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
+ else
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ fi
+ else
+ grep -q "\- nginx$" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
+ fi
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
- if [ "x${USE_LETSENCRYPT_IAM_USER}" != "xyes" ]; then
+ if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
fi
grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
else
# Use custom certs, special case for keepweb
if [ ${R} = "keepweb" ]; then
- copy_custom_cert ${CUSTOM_CERTS_DIR} download
- copy_custom_cert ${CUSTOM_CERTS_DIR} collections
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} download
+ copy_custom_cert ${CUSTOM_CERTS_DIR} collections
+ fi
else
- copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ copy_custom_cert ${CUSTOM_CERTS_DIR} ${R}
+ fi
fi
fi
# webshell role is just a nginx vhost, so it has no state
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
fi
# Pillars
+ if [ "${R}" = "workbench" ]; then
+ grep -q "logrotate_wb1" ${P_DIR}/top.sls || echo " - logrotate_wb1" >> ${P_DIR}/top.sls
+ fi
grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
# Special case for keepweb
grep -q "nginx_collections_configuration" ${P_DIR}/top.sls || echo " - nginx_collections_configuration" >> ${P_DIR}/top.sls
fi
- # Currently, only available on config_examples/multi_host/aws
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
- if [ "${USE_LETSENCRYPT_IAM_USER}" != "yes" ]; then
+ if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
fi
grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
${P_DIR}/nginx_${R}_configuration.sls
fi
else
+ grep -q "ssl_key_encrypted" ${P_DIR}/top.sls || echo " - ssl_key_encrypted" >> ${P_DIR}/top.sls
# As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
# Special case for keepweb
if [ ${R} = "keepweb" ]; then
grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
fi
fi
+ # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
;;
"shell")
# States
+ echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+ echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
grep -q "docker" ${S_DIR}/top.sls || echo " - docker.software" >> ${S_DIR}/top.sls
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
# Pillars
grep -q "docker" ${P_DIR}/top.sls || echo " - docker" >> ${P_DIR}/top.sls
;;
- "dispatcher")
- # States
- grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
- # Pillars
- # ATM, no specific pillar needed
- ;;
- "keepstore")
+ "dispatcher" | "keepbalance" | "keepstore")
# States
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
# Pillars
exit 0
fi
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ -e /root/.psqlrc ]; then
- if ! ( grep 'pset pager off' /root/.psqlrc ); then
- RESTORE_PSQL="yes"
- cp /root/.psqlrc /root/.psqlrc.provision.backup
- fi
-else
- DELETE_PSQL="yes"
-fi
-
-echo '\pset pager off' >> /root/.psqlrc
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
-
# Now run the install
-salt-call --local state.apply -l ${LOG_LEVEL}
+salt-call --state-output=mixed --local state.apply -l ${LOG_LEVEL}
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ "x${DELETE_PSQL}" = "xyes" ]; then
- echo "Removing .psql file"
- rm /root/.psqlrc
+# Finally, make sure that /etc/hosts is not overwritten on reboot
+if [ -d /etc/cloud/cloud.cfg.d ]; then
+ # TODO: will this work on CentOS?
+ sed -i 's/^manage_etc_hosts: true/#manage_etc_hosts: true/g' /etc/cloud/cloud.cfg.d/*
fi
-if [ "x${RESTORE_PSQL}" = "xyes" ]; then
- echo "Restoring .psql file"
- mv -v /root/.psqlrc.provision.backup /root/.psqlrc
-fi
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
-
# Leave a copy of the Arvados CA so the user can copy it where it's required
-if [ "$DEV_MODE" = "yes" ]; then
- echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
- # If running in a vagrant VM, also add default user to docker group
+if [ "${SSL_MODE}" = "self-signed" ]; then
+ echo "Copying the Arvados CA certificate '${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.crt' to the installer dir, so you can import it"
if [ "x${VAGRANT}" = "xyes" ]; then
cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
+ else
+ cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.crt
+ fi
+fi
+if [ "x${VAGRANT}" = "xyes" ]; then
+ # If running in a vagrant VM, also add default user to docker group
echo "Adding the vagrant user to the docker group"
usermod -a -G docker vagrant
- else
- cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
- fi
fi
# Test that the installation finished correctly