# This will be populated by loadconfig()
declare GITTARGET
+# The public host used as an SSH jump host
+# This will be populated by loadconfig()
+declare USE_SSH_JUMPHOST
+
checktools() {
local MISSING=''
for a in git ip ; do
# each node, pushing our branch, and updating the checkout.
if [[ "$NODE" != localhost ]] ; then
- if ! ssh $DEPLOY_USER@$NODE test -d ${GITTARGET}.git ; then
-
- # Initialize the git repository (1st time case). We're
- # actually going to make two repositories here because git
- # will complain if you try to push to a repository with a
- # checkout. So we're going to create a "bare" repository
- # and then clone a regular repository (with a checkout)
- # from that.
-
- ssh $DEPLOY_USER@$NODE git init --bare ${GITTARGET}.git
- ssh $DEPLOY_USER@$NODE chmod 700 ${GITTARGET}.git
- if ! git remote add $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git ; then
- git remote set-url $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git
- fi
- git push $NODE $BRANCH
- ssh $DEPLOY_USER@$NODE git clone ${GITTARGET}.git ${GITTARGET}
- ssh $DEPLOY_USER@$NODE chmod 700 ${GITTARGET}
- fi
+ SSH=`ssh_cmd "$NODE"`
+ GIT="eval `git_cmd $NODE`"
+ if ! $SSH $DEPLOY_USER@$NODE test -d ${GITTARGET}.git ; then
+
+ # Initialize the git repository (1st time case). We're
+ # actually going to make two repositories here because git
+ # will complain if you try to push to a repository with a
+ # checkout. So we're going to create a "bare" repository
+ # and then clone a regular repository (with a checkout)
+ # from that.
+
+ $SSH $DEPLOY_USER@$NODE git init --bare --shared=0600 ${GITTARGET}.git
+ if ! $GIT remote add $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git ; then
+ $GIT remote set-url $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git
+ fi
+ $GIT push $NODE $BRANCH
+ $SSH $DEPLOY_USER@$NODE "umask 0077 && git clone ${GITTARGET}.git ${GITTARGET}"
+ fi
- # The update case.
- #
- # Push to the bare repository on the remote node, then in the
- # remote node repository with the checkout, pull the branch
- # from the bare repository.
+ # The update case.
+ #
+ # Push to the bare repository on the remote node, then in the
+ # remote node repository with the checkout, pull the branch
+ # from the bare repository.
- git push $NODE $BRANCH
- ssh $DEPLOY_USER@$NODE "git -C ${GITTARGET} checkout ${BRANCH} && git -C ${GITTARGET} pull"
+ $GIT push $NODE $BRANCH
+ $SSH $DEPLOY_USER@$NODE "git -C ${GITTARGET} checkout ${BRANCH} && git -C ${GITTARGET} pull"
fi
}
# the appropriate roles.
if [[ -z "$ROLES" ]] ; then
- echo "No roles specified for $NODE, will deploy all roles"
+ echo "No roles specified for $NODE, will deploy all roles"
else
- ROLES="--roles ${ROLES}"
+ ROLES="--roles ${ROLES}"
fi
logfile=deploy-${NODE}-$(date -Iseconds).log
+ SSH=`ssh_cmd "$NODE"`
if [[ "$NODE" = localhost ]] ; then
SUDO=''
- if [[ $(whoami) != 'root' ]] ; then
- SUDO=sudo
- fi
- $SUDO ./provision.sh --config ${CONFIG_FILE} ${ROLES} 2>&1 | tee $logfile
- else
- ssh $DEPLOY_USER@$NODE "cd ${GITTARGET} && sudo ./provision.sh --config ${CONFIG_FILE} ${ROLES}" 2>&1 | tee $logfile
+ if [[ $(whoami) != 'root' ]] ; then
+ SUDO=sudo
+ fi
+ $SUDO ./provision.sh --config ${CONFIG_FILE} ${ROLES} 2>&1 | tee $logfile
+ else
+ $SSH $DEPLOY_USER@$NODE "cd ${GITTARGET} && sudo ./provision.sh --config ${CONFIG_FILE} ${ROLES}" 2>&1 | tee $logfile
fi
}
loadconfig() {
if [[ ! -s $CONFIG_FILE ]] ; then
- echo "Must be run from initialized setup dir, maybe you need to 'initialize' first?"
+ echo "Must be run from initialized setup dir, maybe you need to 'initialize' first?"
fi
source ${CONFIG_FILE}
GITTARGET=arvados-deploy-config-${CLUSTER}
}
+ssh_cmd() {
+ local NODE=$1
+ if [ -z "${USE_SSH_JUMPHOST}" -o "${NODE}" == "${USE_SSH_JUMPHOST}" -o "${NODE}" == "localhost" ]; then
+ echo "ssh"
+ else
+ echo "ssh -J ${DEPLOY_USER}@${USE_SSH_JUMPHOST}"
+ fi
+}
+
+git_cmd() {
+ local NODE=$1
+ echo "GIT_SSH_COMMAND=\"`ssh_cmd ${NODE}`\" git"
+}
+
set +u
subcmd="$1"
set -u
fi
echo "Initializing $SETUPDIR"
- git init $SETUPDIR
- chmod 700 $SETUPDIR
+ git init --shared=0600 $SETUPDIR
cp -r *.sh tests $SETUPDIR
cp local.params.example.$PARAMS $SETUPDIR/${CONFIG_FILE}
cd $SETUPDIR
echo '*.log' > .gitignore
+ echo '**/.terraform' >> .gitignore
+ echo '**/.infracost' >> .gitignore
+
+ if [[ -n "$TERRAFORM" ]] ; then
+ git add terraform
+ fi
git add *.sh ${CONFIG_FILE} ${CONFIG_DIR} tests .gitignore
git commit -m"initial commit"
terraform)
logfile=terraform-$(date -Iseconds).log
- (cd terraform/vpc && terraform apply) 2>&1 | tee -a $logfile
- (cd terraform/data-storage && terraform apply) 2>&1 | tee -a $logfile
- (cd terraform/services && terraform apply) 2>&1 | grep -v letsencrypt_iam_secret_access_key | tee -a $logfile
+ (cd terraform/vpc && terraform apply -auto-approve) 2>&1 | tee -a $logfile
+ (cd terraform/data-storage && terraform apply -auto-approve) 2>&1 | tee -a $logfile
+ (cd terraform/services && terraform apply -auto-approve) 2>&1 | grep -v letsencrypt_iam_secret_access_key | tee -a $logfile
(cd terraform/services && echo -n 'letsencrypt_iam_secret_access_key = ' && terraform output letsencrypt_iam_secret_access_key) 2>&1 | tee -a $logfile
;;
+ terraform-destroy)
+ logfile=terraform-$(date -Iseconds).log
+ (cd terraform/services && terraform destroy) 2>&1 | tee -a $logfile
+ (cd terraform/data-storage && terraform destroy) 2>&1 | tee -a $logfile
+ (cd terraform/vpc && terraform destroy) 2>&1 | tee -a $logfile
+ ;;
+
generate-tokens)
for i in BLOB_SIGNING_KEY MANAGEMENT_TOKEN SYSTEM_ROOT_TOKEN ANONYMOUS_USER_TOKEN WORKBENCH_SECRET_KEY DATABASE_PASSWORD; do
echo ${i}=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 32 ; echo '')
exit 1
fi
- BRANCH=$(git branch --show-current)
+ BRANCH=$(git rev-parse --abbrev-ref HEAD)
set -x
else
# Just deploy the node that was supplied on the command line.
sync $NODE $BRANCH
- deploynode $NODE ""
+ deploynode $NODE "${NODES[$NODE]}"
fi
set +x
echo ""
echo "initialize initialize the setup directory for configuration"
echo "terraform create cloud resources using terraform"
+ echo "terraform-destroy destroy cloud resources created by terraform"
echo "generate-tokens generate random values for tokens"
echo "deploy deploy the configuration from the setup directory"
echo "diagnostics check your install using diagnostics"