$cmd = [$docker_bin, 'ps', '-q'];
}
Log(undef, "Sanity check is `@$cmd`");
-srun(["srun", "--nodes=\Q$ENV{SLURM_NNODES}\E", "--ntasks-per-node=1"],
- $cmd,
- {fork => 1});
-if ($? != 0) {
- Log(undef, "Sanity check failed: ".exit_status_s($?));
+my ($exited, $stdout, $stderr) = srun_sync(
+ ["srun", "--nodes=\Q$ENV{SLURM_NNODES}\E", "--ntasks-per-node=1"],
+ $cmd,
+ {label => "sanity check"});
+if ($exited != 0) {
+ Log(undef, "Sanity check failed: ".exit_status_s($exited));
exit EX_TEMPFAIL;
}
Log(undef, "Sanity check OK");
my $git_tar_count = 0;
if (!defined $no_clear_tmp) {
- # Clean out crunch_tmp/work, crunch_tmp/opt, crunch_tmp/src*
- Log (undef, "Clean work dirs");
-
- my $cleanpid = fork();
- if ($cleanpid == 0)
- {
- # Find FUSE mounts under $CRUNCH_TMP and unmount them.
- # Then clean up work directories.
- # TODO: When #5036 is done and widely deployed, we can limit mount's
- # -t option to simply fuse.keep.
- srun (["srun", "--nodelist=$nodelist", "-D", $ENV{'TMPDIR'}],
- ['bash', '-ec', '-o', 'pipefail', 'mount -t fuse,fuse.keep | awk "(index(\$3, \"$CRUNCH_TMP\") == 1){print \$3}" | xargs -r -n 1 fusermount -u -z; sleep 1; rm -rf $JOB_WORK $CRUNCH_INSTALL $CRUNCH_TMP/task $CRUNCH_TMP/src* $CRUNCH_TMP/*.cid']);
- exit (1);
- }
- while (1)
- {
- last if $cleanpid == waitpid (-1, WNOHANG);
- freeze_if_want_freeze ($cleanpid);
- select (undef, undef, undef, 0.1);
- }
- if ($?) {
- Log(undef, "Clean work dirs: exit ".exit_status_s($?));
+ # Find FUSE mounts under $CRUNCH_TMP and unmount them. Then clean
+ # up work directories crunch_tmp/work, crunch_tmp/opt,
+ # crunch_tmp/src*.
+ #
+ # TODO: When #5036 is done and widely deployed, we can limit mount's
+ # -t option to simply fuse.keep.
+ my ($exited, $stdout, $stderr) = srun_sync(
+ ["srun", "--nodelist=$nodelist", "-D", $ENV{'TMPDIR'}],
+ ['bash', '-ec', '-o', 'pipefail', 'mount -t fuse,fuse.keep | awk "(index(\$3, \"$CRUNCH_TMP\") == 1){print \$3}" | xargs -r -n 1 fusermount -u -z; sleep 1; rm -rf $JOB_WORK $CRUNCH_INSTALL $CRUNCH_TMP/task $CRUNCH_TMP/src* $CRUNCH_TMP/*.cid'],
+ {label => "clean work dirs"});
+ if ($exited != 0) {
exit(EX_RETRY_UNLOCKED);
}
}
# If this job requires a Docker image, install that.
my ($docker_locator, $docker_stream, $docker_hash, $docker_limitmem, $dockeruserarg);
if ($docker_locator = $Job->{docker_image_locator}) {
+ Log (undef, "Install docker image $docker_locator");
($docker_stream, $docker_hash) = find_docker_image($docker_locator);
if (!$docker_hash)
{
croak("No Docker image hash found from locator $docker_locator");
}
+ Log (undef, "docker image hash is $docker_hash");
$docker_stream =~ s/^\.//;
my $docker_install_script = qq{
if ! $docker_bin images -q --no-trunc --all | grep -qxF \Q$docker_hash\E; then
arv-get \Q$docker_locator$docker_stream/$docker_hash.tar\E | $docker_bin load
fi
};
- my $docker_pid = fork();
- if ($docker_pid == 0)
- {
- srun (["srun", "--nodelist=" . join(',', @node)],
- ["/bin/sh", "-ec", $docker_install_script]);
- exit ($?);
- }
- while (1)
- {
- last if $docker_pid == waitpid (-1, WNOHANG);
- freeze_if_want_freeze ($docker_pid);
- select (undef, undef, undef, 0.1);
- }
- if ($? != 0)
+
+ my ($exited, $stdout, $stderr) = srun_sync(
+ ["srun", "--nodelist=" . join(',', @node)],
+ ["/bin/bash", "-o", "pipefail", "-ec", $docker_install_script],
+ {label => "load docker image"});
+ if ($exited != 0)
{
- croak("Installing Docker image from $docker_locator exited "
- .exit_status_s($?));
+ exit(EX_RETRY_UNLOCKED);
}
# Determine whether this version of Docker supports memory+swap limits.
- srun(["srun", "--nodelist=" . $node[0]],
- ["/bin/sh", "-ec", "$docker_bin run --help | grep -qe --memory-swap="],
- {fork => 1});
- $docker_limitmem = ($? == 0);
+ ($exited, $stdout, $stderr) = srun_sync(
+ ["srun", "--nodelist=" . $node[0]],
+ [$docker_bin, 'run', '--help'],
+ {label => "check --memory-swap feature"});
+ $docker_limitmem = ($stdout =~ /--memory-swap/);
# Find a non-root Docker user to use.
# Tries the default user for the container, then 'crunch', then 'nobody',
# Docker containers.
my @tryusers = ("", "crunch", "nobody");
foreach my $try_user (@tryusers) {
+ my $label;
my $try_user_arg;
if ($try_user eq "") {
- Log(undef, "Checking if container default user is not UID 0");
+ $label = "check whether default user is UID 0";
$try_user_arg = "";
} else {
- Log(undef, "Checking if user '$try_user' is not UID 0");
+ $label = "check whether user '$try_user' is UID 0";
$try_user_arg = "--user=$try_user";
}
- srun(["srun", "--nodelist=" . $node[0]],
- ["/bin/sh", "-ec",
- "a=`$docker_bin run $docker_run_args $try_user_arg $docker_hash id --user` && " .
- " test \$a -ne 0"],
- {fork => 1});
- if ($? == 0) {
+ my ($exited, $stdout, $stderr) = srun_sync(
+ ["srun", "--nodelist=" . $node[0]],
+ ["/bin/sh", "-ec",
+ "$docker_bin run $docker_run_args $try_user_arg $docker_hash id --user"],
+ {label => $label});
+ chomp($stdout);
+ if ($exited == 0 && $stdout =~ /^\d+$/ && $stdout > 0) {
$dockeruserarg = $try_user_arg;
if ($try_user eq "") {
Log(undef, "Container will run with default user");
}
}
else {
- my $install_exited;
+ my $exited;
my $install_script_tries_left = 3;
for (my $attempts = 0; $attempts < 3; $attempts++) {
- Log(undef, "Run install script on all workers");
-
my @srunargs = ("srun",
"--nodelist=$nodelist",
"-D", $ENV{'TMPDIR'}, "--job-name=$job_id");
"mkdir -p $ENV{CRUNCH_INSTALL} && cd $ENV{CRUNCH_TMP} && perl -");
$ENV{"CRUNCH_GIT_ARCHIVE_HASH"} = md5_hex($git_archive);
- my ($install_stderr_r, $install_stderr_w);
- pipe $install_stderr_r, $install_stderr_w or croak("pipe() failed: $!");
- set_nonblocking($install_stderr_r);
- my $installpid = fork();
- if ($installpid == 0)
- {
- close($install_stderr_r);
- fcntl($install_stderr_w, F_SETFL, 0) or croak($!); # no close-on-exec
- open(STDOUT, ">&", $install_stderr_w);
- open(STDERR, ">&", $install_stderr_w);
- srun (\@srunargs, \@execargs, {}, $build_script . $git_archive);
- exit (1);
- }
- close($install_stderr_w);
- # Tell freeze_if_want_freeze how to kill the child, otherwise the
- # "waitpid(installpid)" loop won't get interrupted by a freeze:
- $proc{$installpid} = {};
- my $stderr_buf = '';
- # Track whether anything appears on stderr other than slurm errors
- # ("srun: ...") and the "starting: ..." message printed by the
- # srun subroutine itself:
+ my ($stdout, $stderr);
+ ($exited, $stdout, $stderr) = srun_sync(
+ \@srunargs, \@execargs,
+ {label => "run install script on all workers"},
+ $build_script . $git_archive);
+
my $stderr_anything_from_script = 0;
- my $match_our_own_errors = '^(srun: error: |starting: \[)';
- while ($installpid != waitpid(-1, WNOHANG)) {
- freeze_if_want_freeze ($installpid);
- # Wait up to 0.1 seconds for something to appear on stderr, then
- # do a non-blocking read.
- my $bits = fhbits($install_stderr_r);
- select ($bits, undef, $bits, 0.1);
- if (0 < sysread ($install_stderr_r, $stderr_buf, 8192, length($stderr_buf)))
- {
- while ($stderr_buf =~ /^(.*?)\n/) {
- my $line = $1;
- substr $stderr_buf, 0, 1+length($line), "";
- Log(undef, "stderr $line");
- if ($line !~ /$match_our_own_errors/) {
- $stderr_anything_from_script = 1;
- }
- }
- }
- }
- delete $proc{$installpid};
- $install_exited = $?;
- close($install_stderr_r);
- if (length($stderr_buf) > 0) {
- if ($stderr_buf !~ /$match_our_own_errors/) {
+ for my $line (split(/\n/, $stderr)) {
+ if ($line !~ /^(srun: error: |starting: \[)/) {
$stderr_anything_from_script = 1;
}
- Log(undef, "stderr $stderr_buf")
}
- Log (undef, "Install script exited ".exit_status_s($install_exited));
- last if $install_exited == 0 || $main::please_freeze;
+ last if $exited == 0 || $main::please_freeze;
+
# If the install script fails but doesn't print an error message,
# the next thing anyone is likely to do is just run it again in
# case it was a transient problem like "slurm communication fails
unlink($tar_filename);
}
- if ($install_exited != 0) {
+ if ($exited != 0) {
croak("Giving up");
}
}
@freeslot = (0..$#slot);
}
my $round_num_freeslots = scalar(@freeslot);
+print STDERR "crunch-job have ${round_num_freeslots} free slots for ${initial_tasks_this_level} initial tasks at this level, ".scalar(@node)." nodes, and ".scalar(@slot)." slots\n";
my %round_max_slots = ();
for (my $ii = $#freeslot; $ii >= 0; $ii--) {
next;
}
shift @freeslot;
- $proc{$childpid} = { jobstep => $id,
- time => time,
- slot => $childslot,
- jobstepname => "$job_id.$id.$childpid",
- };
+ $proc{$childpid} = {
+ jobstepidx => $id,
+ time => time,
+ slot => $childslot,
+ jobstepname => "$job_id.$id.$childpid",
+ };
croak ("assert failed: \$slot[$childslot]->{'pid'} exists") if exists $slot[$childslot]->{pid};
$slot[$childslot]->{pid} = $childpid;
check_refresh_wanted();
check_squeue();
update_progress_stats();
- select (undef, undef, undef, 0.1);
}
elsif (time - $progress_stats_updated >= 30 || $progress_is_dirty)
{
update_progress_stats();
}
+ if (!$gotsome) {
+ select (undef, undef, undef, 0.1);
+ }
$working_slot_count = scalar(grep { $_->{node}->{fail_count} == 0 &&
$_->{node}->{hold_count} < 4 } @slot);
if (($thisround_failed_multiple >= 8 && $thisround_succeeded == 0) ||
sub reapchildren
{
- my $pid = waitpid (-1, WNOHANG);
- return 0 if $pid <= 0;
-
- my $whatslot = ($slot[$proc{$pid}->{slot}]->{node}->{name}
- . "."
- . $slot[$proc{$pid}->{slot}]->{cpu});
- my $jobstepid = $proc{$pid}->{jobstep};
- my $elapsed = time - $proc{$pid}->{time};
- my $Jobstep = $jobstep[$jobstepid];
-
- my $childstatus = $?;
- my $exitvalue = $childstatus >> 8;
- my $exitinfo = "exit ".exit_status_s($childstatus);
- $Jobstep->{'arvados_task'}->reload;
- my $task_success = $Jobstep->{'arvados_task'}->{success};
-
- Log ($jobstepid, "child $pid on $whatslot $exitinfo success=$task_success");
-
- if (!defined $task_success) {
- # task did not indicate one way or the other --> fail
- Log($jobstepid, sprintf(
- "ERROR: Task process exited %s, but never updated its task record to indicate success and record its output.",
- exit_status_s($childstatus)));
- $Jobstep->{'arvados_task'}->{success} = 0;
- $Jobstep->{'arvados_task'}->save;
- $task_success = 0;
- }
-
- if (!$task_success)
+ my $children_reaped = 0;
+ while ((my $pid = waitpid (-1, WNOHANG)) > 0)
{
- my $temporary_fail;
- $temporary_fail ||= $Jobstep->{tempfail};
- $temporary_fail ||= ($exitvalue == TASK_TEMPFAIL);
-
- ++$thisround_failed;
- ++$thisround_failed_multiple if $Jobstep->{'failures'} >= 1;
-
- # Check for signs of a failed or misconfigured node
- if (++$slot[$proc{$pid}->{slot}]->{node}->{losing_streak} >=
- 2+$slot[$proc{$pid}->{slot}]->{node}->{ncpus}) {
- # Don't count this against jobstep failure thresholds if this
- # node is already suspected faulty and srun exited quickly
- if ($slot[$proc{$pid}->{slot}]->{node}->{hold_until} &&
- $elapsed < 5) {
- Log ($jobstepid, "blaming failure on suspect node " .
- $slot[$proc{$pid}->{slot}]->{node}->{name});
- $temporary_fail ||= 1;
- }
- ban_node_by_slot($proc{$pid}->{slot});
+ my $childstatus = $?;
+
+ my $whatslot = ($slot[$proc{$pid}->{slot}]->{node}->{name}
+ . "."
+ . $slot[$proc{$pid}->{slot}]->{cpu});
+ my $jobstepidx = $proc{$pid}->{jobstepidx};
+
+ if (!WIFEXITED($childstatus))
+ {
+ # child did not exit (may be temporarily stopped)
+ Log ($jobstepidx, "child $pid did not actually exit in reapchildren, ignoring for now.");
+ next;
}
- Log ($jobstepid, sprintf('failure (#%d, %s) after %d seconds',
- ++$Jobstep->{'failures'},
- $temporary_fail ? 'temporary' : 'permanent',
- $elapsed));
+ $children_reaped++;
+ my $elapsed = time - $proc{$pid}->{time};
+ my $Jobstep = $jobstep[$jobstepidx];
+
+ my $exitvalue = $childstatus >> 8;
+ my $exitinfo = "exit ".exit_status_s($childstatus);
+ $Jobstep->{'arvados_task'}->reload;
+ my $task_success = $Jobstep->{'arvados_task'}->{success};
+
+ Log ($jobstepidx, "child $pid on $whatslot $exitinfo success=$task_success");
+
+ if (!defined $task_success) {
+ # task did not indicate one way or the other --> fail
+ Log($jobstepidx, sprintf(
+ "ERROR: Task process exited %s, but never updated its task record to indicate success and record its output.",
+ exit_status_s($childstatus)));
+ $Jobstep->{'arvados_task'}->{success} = 0;
+ $Jobstep->{'arvados_task'}->save;
+ $task_success = 0;
+ }
- if (!$temporary_fail || $Jobstep->{'failures'} >= 3) {
- # Give up on this task, and the whole job
- $main::success = 0;
+ if (!$task_success)
+ {
+ my $temporary_fail;
+ $temporary_fail ||= $Jobstep->{tempfail};
+ $temporary_fail ||= ($exitvalue == TASK_TEMPFAIL);
+
+ ++$thisround_failed;
+ ++$thisround_failed_multiple if $Jobstep->{'failures'} >= 1;
+
+ # Check for signs of a failed or misconfigured node
+ if (++$slot[$proc{$pid}->{slot}]->{node}->{losing_streak} >=
+ 2+$slot[$proc{$pid}->{slot}]->{node}->{ncpus}) {
+ # Don't count this against jobstep failure thresholds if this
+ # node is already suspected faulty and srun exited quickly
+ if ($slot[$proc{$pid}->{slot}]->{node}->{hold_until} &&
+ $elapsed < 5) {
+ Log ($jobstepidx, "blaming failure on suspect node " .
+ $slot[$proc{$pid}->{slot}]->{node}->{name});
+ $temporary_fail ||= 1;
+ }
+ ban_node_by_slot($proc{$pid}->{slot});
+ }
+
+ Log ($jobstepidx, sprintf('failure (#%d, %s) after %d seconds',
+ ++$Jobstep->{'failures'},
+ $temporary_fail ? 'temporary' : 'permanent',
+ $elapsed));
+
+ if (!$temporary_fail || $Jobstep->{'failures'} >= 3) {
+ # Give up on this task, and the whole job
+ $main::success = 0;
+ }
+ # Put this task back on the todo queue
+ push @jobstep_todo, $jobstepidx;
+ $Job->{'tasks_summary'}->{'failed'}++;
}
- # Put this task back on the todo queue
- push @jobstep_todo, $jobstepid;
- $Job->{'tasks_summary'}->{'failed'}++;
- }
- else
- {
- ++$thisround_succeeded;
- $slot[$proc{$pid}->{slot}]->{node}->{losing_streak} = 0;
- $slot[$proc{$pid}->{slot}]->{node}->{hold_until} = 0;
- $slot[$proc{$pid}->{slot}]->{node}->{fail_count} = 0;
- push @jobstep_done, $jobstepid;
- Log ($jobstepid, "success in $elapsed seconds");
- }
- $Jobstep->{exitcode} = $childstatus;
- $Jobstep->{finishtime} = time;
- $Jobstep->{'arvados_task'}->{finished_at} = strftime "%Y-%m-%dT%H:%M:%SZ", gmtime($Jobstep->{finishtime});
- $Jobstep->{'arvados_task'}->save;
- process_stderr ($jobstepid, $task_success);
- Log ($jobstepid, sprintf("task output (%d bytes): %s",
- length($Jobstep->{'arvados_task'}->{output}),
- $Jobstep->{'arvados_task'}->{output}));
-
- close $reader{$jobstepid};
- delete $reader{$jobstepid};
- delete $slot[$proc{$pid}->{slot}]->{pid};
- push @freeslot, $proc{$pid}->{slot};
- delete $proc{$pid};
-
- if ($task_success) {
- # Load new tasks
- my $newtask_list = [];
- my $newtask_results;
- do {
- $newtask_results = api_call(
- "job_tasks/list",
- 'where' => {
- 'created_by_job_task_uuid' => $Jobstep->{'arvados_task'}->{uuid}
- },
- 'order' => 'qsequence',
- 'offset' => scalar(@$newtask_list),
- );
- push(@$newtask_list, @{$newtask_results->{items}});
- } while (@{$newtask_results->{items}});
- foreach my $arvados_task (@$newtask_list) {
- my $jobstep = {
- 'level' => $arvados_task->{'sequence'},
- 'failures' => 0,
- 'arvados_task' => $arvados_task
- };
- push @jobstep, $jobstep;
- push @jobstep_todo, $#jobstep;
+ else
+ {
+ ++$thisround_succeeded;
+ $slot[$proc{$pid}->{slot}]->{node}->{losing_streak} = 0;
+ $slot[$proc{$pid}->{slot}]->{node}->{hold_until} = 0;
+ $slot[$proc{$pid}->{slot}]->{node}->{fail_count} = 0;
+ push @jobstep_done, $jobstepidx;
+ Log ($jobstepidx, "success in $elapsed seconds");
+ }
+ $Jobstep->{exitcode} = $childstatus;
+ $Jobstep->{finishtime} = time;
+ $Jobstep->{'arvados_task'}->{finished_at} = strftime "%Y-%m-%dT%H:%M:%SZ", gmtime($Jobstep->{finishtime});
+ $Jobstep->{'arvados_task'}->save;
+ process_stderr_final ($jobstepidx);
+ Log ($jobstepidx, sprintf("task output (%d bytes): %s",
+ length($Jobstep->{'arvados_task'}->{output}),
+ $Jobstep->{'arvados_task'}->{output}));
+
+ close $reader{$jobstepidx};
+ delete $reader{$jobstepidx};
+ delete $slot[$proc{$pid}->{slot}]->{pid};
+ push @freeslot, $proc{$pid}->{slot};
+ delete $proc{$pid};
+
+ if ($task_success) {
+ # Load new tasks
+ my $newtask_list = [];
+ my $newtask_results;
+ do {
+ $newtask_results = api_call(
+ "job_tasks/list",
+ 'where' => {
+ 'created_by_job_task_uuid' => $Jobstep->{'arvados_task'}->{uuid}
+ },
+ 'order' => 'qsequence',
+ 'offset' => scalar(@$newtask_list),
+ );
+ push(@$newtask_list, @{$newtask_results->{items}});
+ } while (@{$newtask_results->{items}});
+ foreach my $arvados_task (@$newtask_list) {
+ my $jobstep = {
+ 'level' => $arvados_task->{'sequence'},
+ 'failures' => 0,
+ 'arvados_task' => $arvados_task
+ };
+ push @jobstep, $jobstep;
+ push @jobstep_todo, $#jobstep;
+ }
}
+ $progress_is_dirty = 1;
}
- $progress_is_dirty = 1;
- 1;
+ return $children_reaped;
}
sub check_refresh_wanted
{
my @stat = stat $ENV{"CRUNCH_REFRESH_TRIGGER"};
- if (@stat && $stat[9] > $latest_refresh) {
+ if (@stat &&
+ $stat[9] > $latest_refresh &&
+ # ...and we have actually locked the job record...
+ $job_id eq $Job->{'uuid'}) {
$latest_refresh = scalar time;
my $Job2 = api_call("jobs/get", uuid => $jobspec);
for my $attr ('cancelled_at',
# squeue check interval (15s) this should make the squeue check an
# infrequent event.
my $silent_procs = 0;
- for my $jobstep (values %proc)
+ for my $js (map {$jobstep[$_->{jobstepidx}]} values %proc)
{
- if ($jobstep->{stderr_at} < $last_squeue_check)
+ if (!exists($js->{stderr_at}))
+ {
+ $js->{stderr_at} = 0;
+ }
+ if ($js->{stderr_at} < $last_squeue_check)
{
$silent_procs++;
}
return if $silent_procs == 0;
# use killem() on procs whose killtime is reached
- while (my ($pid, $jobstep) = each %proc)
+ while (my ($pid, $procinfo) = each %proc)
{
- if (exists $jobstep->{killtime}
- && $jobstep->{killtime} <= time
- && $jobstep->{stderr_at} < $last_squeue_check)
+ my $js = $jobstep[$procinfo->{jobstepidx}];
+ if (exists $procinfo->{killtime}
+ && $procinfo->{killtime} <= time
+ && $js->{stderr_at} < $last_squeue_check)
{
my $sincewhen = "";
- if ($jobstep->{stderr_at}) {
- $sincewhen = " in last " . (time - $jobstep->{stderr_at}) . "s";
+ if ($js->{stderr_at}) {
+ $sincewhen = " in last " . (time - $js->{stderr_at}) . "s";
}
- Log($jobstep->{jobstep}, "killing orphaned srun process $pid (task not in slurm queue, no stderr received$sincewhen)");
+ Log($procinfo->{jobstepidx}, "killing orphaned srun process $pid (task not in slurm queue, no stderr received$sincewhen)");
killem ($pid);
}
}
}
# Check for child procs >60s old and not mentioned by squeue.
- while (my ($pid, $jobstep) = each %proc)
+ while (my ($pid, $procinfo) = each %proc)
{
- if ($jobstep->{time} < time - 60
- && $jobstep->{jobstepname}
- && !exists $ok{$jobstep->{jobstepname}}
- && !exists $jobstep->{killtime})
+ if ($procinfo->{time} < time - 60
+ && $procinfo->{jobstepname}
+ && !exists $ok{$procinfo->{jobstepname}}
+ && !exists $procinfo->{killtime})
{
# According to slurm, this task has ended (successfully or not)
# -- but our srun child hasn't exited. First we must wait (30
# terminated, we'll conclude some slurm communication
# error/delay has caused the task to die without notifying srun,
# and we'll kill srun ourselves.
- $jobstep->{killtime} = time + 30;
- Log($jobstep->{jobstep}, "notice: task is not in slurm queue but srun process $pid has not exited");
+ $procinfo->{killtime} = time + 30;
+ Log($procinfo->{jobstepidx}, "notice: task is not in slurm queue but srun process $pid has not exited");
}
}
}
sub readfrompipes
{
my $gotsome = 0;
- foreach my $job (keys %reader)
+ my %fd_job;
+ my $sel = IO::Select->new();
+ foreach my $jobstepidx (keys %reader)
+ {
+ my $fd = $reader{$jobstepidx};
+ $sel->add($fd);
+ $fd_job{$fd} = $jobstepidx;
+
+ if (my $stdout_fd = $jobstep[$jobstepidx]->{stdout_r}) {
+ $sel->add($stdout_fd);
+ $fd_job{$stdout_fd} = $jobstepidx;
+ }
+ }
+ # select on all reader fds with 0.1s timeout
+ my @ready_fds = $sel->can_read(0.1);
+ foreach my $fd (@ready_fds)
{
my $buf;
- while (0 < sysread ($reader{$job}, $buf, 8192))
+ if (0 < sysread ($fd, $buf, 65536))
{
+ $gotsome = 1;
print STDERR $buf if $ENV{CRUNCH_DEBUG};
- $jobstep[$job]->{stderr_at} = time;
- $jobstep[$job]->{stderr} .= $buf;
- preprocess_stderr ($job);
- if (length ($jobstep[$job]->{stderr}) > 16384)
+
+ my $jobstepidx = $fd_job{$fd};
+ if ($jobstep[$jobstepidx]->{stdout_r} == $fd) {
+ $jobstep[$jobstepidx]->{stdout_captured} .= $buf;
+ next;
+ }
+
+ $jobstep[$jobstepidx]->{stderr_at} = time;
+ $jobstep[$jobstepidx]->{stderr} .= $buf;
+
+ # Consume everything up to the last \n
+ preprocess_stderr ($jobstepidx);
+
+ if (length ($jobstep[$jobstepidx]->{stderr}) > 16384)
{
- substr ($jobstep[$job]->{stderr}, 0, 8192) = "";
+ # If we get a lot of stderr without a newline, chop off the
+ # front to avoid letting our buffer grow indefinitely.
+ substr ($jobstep[$jobstepidx]->{stderr},
+ 0, length($jobstep[$jobstepidx]->{stderr}) - 8192) = "";
}
- $gotsome = 1;
}
}
return $gotsome;
}
+# Consume all full lines of stderr for a jobstep. Everything after the
+# last newline will remain in $jobstep[$jobstepidx]->{stderr} after
+# returning.
sub preprocess_stderr
{
- my $job = shift;
+ my $jobstepidx = shift;
- while ($jobstep[$job]->{stderr} =~ /^(.*?)\n/) {
+ while ($jobstep[$jobstepidx]->{stderr} =~ /^(.*?)\n/) {
my $line = $1;
- substr $jobstep[$job]->{stderr}, 0, 1+length($line), "";
- Log ($job, "stderr $line");
+ substr $jobstep[$jobstepidx]->{stderr}, 0, 1+length($line), "";
+ Log ($jobstepidx, "stderr $line");
if ($line =~ /srun: error: (SLURM job $ENV{SLURM_JOB_ID} has expired|Unable to confirm allocation for job $ENV{SLURM_JOB_ID})/) {
# whoa.
$main::please_freeze = 1;
}
- elsif ($line =~ /srun: error: Node failure on/) {
- my $job_slot_index = $jobstep[$job]->{slotindex};
+ elsif (!exists $jobstep[$jobstepidx]->{slotindex}) {
+ # Skip the following tempfail checks if this srun proc isn't
+ # attached to a particular worker slot.
+ }
+ elsif ($line =~ /srun: error: (Node failure on|Aborting, .*\bio error\b)/) {
+ my $job_slot_index = $jobstep[$jobstepidx]->{slotindex};
+ my $job_slot_index = $jobstep[$jobstepidx]->{slotindex};
$slot[$job_slot_index]->{node}->{fail_count}++;
- $jobstep[$job]->{tempfail} = 1;
+ $jobstep[$jobstepidx]->{tempfail} = 1;
ban_node_by_slot($job_slot_index);
}
elsif ($line =~ /srun: error: (Unable to create job step|.*: Communication connection failure)/) {
- $jobstep[$job]->{tempfail} = 1;
- ban_node_by_slot($jobstep[$job]->{slotindex});
+ $jobstep[$jobstepidx]->{tempfail} = 1;
+ ban_node_by_slot($jobstep[$jobstepidx]->{slotindex});
}
elsif ($line =~ /arvados\.errors\.Keep/) {
- $jobstep[$job]->{tempfail} = 1;
+ $jobstep[$jobstepidx]->{tempfail} = 1;
}
}
}
-sub process_stderr
+sub process_stderr_final
{
- my $job = shift;
- my $task_success = shift;
- preprocess_stderr ($job);
+ my $jobstepidx = shift;
+ preprocess_stderr ($jobstepidx);
map {
- Log ($job, "stderr $_");
- } split ("\n", $jobstep[$job]->{stderr});
+ Log ($jobstepidx, "stderr $_");
+ } split ("\n", $jobstep[$jobstepidx]->{stderr});
+ $jobstep[$jobstepidx]->{stderr} = '';
}
sub fetch_block
}
if (!exists $proc{$_}->{"sent_$sig"})
{
- Log ($proc{$_}->{jobstep}, "sending 2x signal $sig to pid $_");
+ Log ($proc{$_}->{jobstepidx}, "sending 2x signal $sig to pid $_");
kill $sig, $_;
select (undef, undef, undef, 0.1);
if ($sig == 2)
return $log_pipe_pid;
}
-sub Log # ($jobstep_id, $logmessage)
+sub Log # ($jobstepidx, $logmessage)
{
- if ($_[1] =~ /\n/) {
+ my ($jobstepidx, $logmessage) = @_;
+ if ($logmessage =~ /\n/) {
for my $line (split (/\n/, $_[1])) {
- Log ($_[0], $line);
+ Log ($jobstepidx, $line);
}
return;
}
my $fh = select STDERR; $|=1; select $fh;
- my $message = sprintf ("%s %d %s %s", $job_id, $$, @_);
+ my $task_qseq = '';
+ if (defined($jobstepidx) && exists($jobstep[$jobstepidx]->{arvados_task})) {
+ $task_qseq = $jobstepidx;
+ }
+ my $message = sprintf ("%s %d %s %s", $job_id, $$, $task_qseq, $logmessage);
$message =~ s{([^ -\176])}{"\\" . sprintf ("%03o", ord($1))}ge;
$message .= "\n";
my $datetime;
}
+sub srun_sync
+{
+ my $srunargs = shift;
+ my $execargs = shift;
+ my $opts = shift || {};
+ my $stdin = shift;
+
+ my $label = exists $opts->{label} ? $opts->{label} : "@$execargs";
+ Log (undef, "$label: start");
+
+ my ($stderr_r, $stderr_w);
+ pipe $stderr_r, $stderr_w or croak("pipe() failed: $!");
+
+ my ($stdout_r, $stdout_w);
+ pipe $stdout_r, $stdout_w or croak("pipe() failed: $!");
+
+ my $srunpid = fork();
+ if ($srunpid == 0)
+ {
+ close($stderr_r);
+ close($stdout_r);
+ fcntl($stderr_w, F_SETFL, 0) or croak($!); # no close-on-exec
+ fcntl($stdout_w, F_SETFL, 0) or croak($!);
+ open(STDERR, ">&", $stderr_w);
+ open(STDOUT, ">&", $stdout_w);
+ srun ($srunargs, $execargs, $opts, $stdin);
+ exit (1);
+ }
+ close($stderr_w);
+ close($stdout_w);
+
+ set_nonblocking($stderr_r);
+ set_nonblocking($stdout_r);
+
+ # Add entries to @jobstep and %proc so check_squeue() and
+ # freeze_if_want_freeze() can treat it like a job task process.
+ push @jobstep, {
+ stderr => '',
+ stderr_at => 0,
+ stderr_captured => '',
+ stdout_r => $stdout_r,
+ stdout_captured => '',
+ };
+ my $jobstepidx = $#jobstep;
+ $proc{$srunpid} = {
+ jobstepidx => $jobstepidx,
+ };
+ $reader{$jobstepidx} = $stderr_r;
+
+ while ($srunpid != waitpid ($srunpid, WNOHANG)) {
+ my $busy = readfrompipes();
+ if (!$busy || ($latest_refresh + 2 < scalar time)) {
+ check_refresh_wanted();
+ check_squeue();
+ }
+ if (!$busy) {
+ select(undef, undef, undef, 0.1);
+ }
+ killem(keys %proc) if $main::please_freeze;
+ }
+ my $exited = $?;
+
+ 1 while readfrompipes();
+ process_stderr_final ($jobstepidx);
+
+ Log (undef, "$label: exit ".exit_status_s($exited));
+
+ close($stdout_r);
+ close($stderr_r);
+ delete $proc{$srunpid};
+ delete $reader{$jobstepidx};
+
+ my $j = pop @jobstep;
+ return ($exited, $j->{stdout_captured}, $j->{stderr_captured});
+}
+
+
sub srun
{
my $srunargs = shift;
projects / arvados.git / blobdiff