set -o pipefail
-_exit_handler() {
- local rc="$?"
- trap - EXIT
- if [ "$rc" -ne 0 ]; then
- echo "Error occurred ($rc) while running $0 at line $1 : $BASH_COMMAND"
- fi
- exit "$rc"
-}
-
-trap '_exit_handler $LINENO' EXIT ERR
-
# capture the directory that the script is running from
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
echo >&2 " -h, --help Display this help and exit"
echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
echo >&2 " This parameter does not perform any installation at all. It's"
- echo >&2 " intended to give you a parsed sot of configuration files so"
+ echo >&2 " intended to give you a parsed set of configuration files so"
echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
echo >&2 " It"
echo >&2 " - parses the pillar and states templates,"
echo >&2 " - downloads the helper formulas with their desired versions,"
echo >&2 " - prepares the 'top.sls' files both for pillars and states"
- echo >&2 " for the selected role/s"
+ echo >&2 " for the selected role(s)"
echo >&2 " - writes the resulting files into <dest_dir>"
echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
echo >&2 " --development Run in dev mode, using snakeoil certs"
cert_dir=${1}
cert_name=${2}
- mkdir -p /srv/salt/certs
+ mkdir -p --mode=0700 /srv/salt/certs
if [ -f ${cert_dir}/${cert_name}.crt ]; then
- cp -v ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
+ install --mode=0600 ${cert_dir}/${cert_name}.crt /srv/salt/certs/arvados-${cert_name}.pem
else
echo "${cert_dir}/${cert_name}.crt does not exist. Exiting"
exit 1
fi
if [ -f ${cert_dir}/${cert_name}.key ]; then
- cp -v ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
+ install --mode=0600 ${cert_dir}/${cert_name}.key /srv/salt/certs/arvados-${cert_name}.key
else
echo "${cert_dir}/${cert_name}.key does not exist. Exiting"
exit 1
# ARVADOS_TAG="2.2.0"
# BRANCH="main"
+# We pin the salt version to avoid potential incompatibilities when a new
+# stable version is released.
+SALT_VERSION="3004"
+
# Other formula versions we depend on
-POSTGRES_TAG="v0.44.0"
+#POSTGRES_TAG="v0.44.0"
+#POSTGRES_URL="https://github.com/saltstack-formulas/postgres-formula.git"
+POSTGRES_TAG="0.45.0-bugfix327"
+POSTGRES_URL="https://github.com/arvados/postgres-formula.git"
NGINX_TAG="v2.8.1"
DOCKER_TAG="v2.4.2"
LOCALE_TAG="v0.3.4"
LETSENCRYPT_TAG="v2.1.0"
+LOGROTATE_TAG="v0.14.0"
# Salt's dir
DUMP_SALT_CONFIG_DIR=""
arguments ${@}
+declare -A NODES
+
if [ -s ${CONFIG_FILE} ]; then
source ${CONFIG_FILE}
else
exit 1
fi
-if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
+if grep -rni 'fixme' ${CONFIG_FILE} ${CONFIG_DIR} ; then
echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
echo >&2 "Please, fix them and re-run the provision script."
exit 1
fi
if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
- echo >&2 "ERROR: <CLUSTER> must be exactly 5 alphanumeric characters long"
+ echo >&2 "ERROR: <CLUSTER> must be exactly 5 lowercase alphanumeric characters long"
echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
exit 1
fi
echo "Salt already installed"
else
curl -L https://bootstrap.saltstack.com -o /tmp/bootstrap_salt.sh
- sh /tmp/bootstrap_salt.sh -XdfP -x python3
+ sh /tmp/bootstrap_salt.sh -XdfP -x python3 stable ${SALT_VERSION}
/bin/systemctl stop salt-minion.service
/bin/systemctl disable salt-minion.service
fi
# Get the formula and dependencies
cd ${F_DIR} || exit 1
echo "Cloning formulas"
-rm -rf ${F_DIR}/* || exit 1
-git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
-( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" -b "${DOCKER_TAG}" )
+test -d docker && ( cd docker && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/docker-formula.git ${F_DIR}/docker
+( cd docker && git checkout --quiet tags/"${DOCKER_TAG}" )
echo "...locale"
-git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
-( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" -b "${LOCALE_TAG}" )
+test -d locale && ( cd locale && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/locale-formula.git ${F_DIR}/locale
+( cd locale && git checkout --quiet tags/"${LOCALE_TAG}" )
echo "...nginx"
-git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
-( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" -b "${NGINX_TAG}" )
+test -d nginx && ( cd nginx && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/nginx-formula.git ${F_DIR}/nginx
+( cd nginx && git checkout --quiet tags/"${NGINX_TAG}" )
echo "...postgres"
-git clone --quiet https://github.com/saltstack-formulas/postgres-formula.git ${F_DIR}/postgres
-( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" -b "${POSTGRES_TAG}" )
+test -d postgres && ( cd postgres && git fetch ) \
+ || git clone --quiet ${POSTGRES_URL} ${F_DIR}/postgres
+( cd postgres && git checkout --quiet tags/"${POSTGRES_TAG}" )
echo "...letsencrypt"
-git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
-( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" -b "${LETSENCRYPT_TAG}" )
+test -d letsencrypt && ( cd letsencrypt && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/letsencrypt-formula.git ${F_DIR}/letsencrypt
+( cd letsencrypt && git checkout --quiet tags/"${LETSENCRYPT_TAG}" )
+
+echo "...logrotate"
+test -d logrotate && ( cd logrotate && git fetch ) \
+ || git clone --quiet https://github.com/saltstack-formulas/logrotate-formula.git ${F_DIR}/logrotate
+( cd logrotate && git checkout --quiet tags/"${LOGROTATE_TAG}" )
echo "...arvados"
-git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
+test -d arvados || git clone --quiet https://git.arvados.org/arvados-formula.git ${F_DIR}/arvados
# If we want to try a specific branch of the formula
-if [ "x${BRANCH}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${BRANCH}" ]; then
+if [ "x${BRANCH}" != "x" ]; then
( cd ${F_DIR}/arvados && git checkout --quiet -t origin/"${BRANCH}" -b "${BRANCH}" )
-elif [ "x${ARVADOS_TAG}" != "x" -a $(git rev-parse --abbrev-ref HEAD) != "${ARVADOS_TAG}" ]; then
-( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
+elif [ "x${ARVADOS_TAG}" != "x" ]; then
+ ( cd ${F_DIR}/arvados && git checkout --quiet tags/"${ARVADOS_TAG}" -b "${ARVADOS_TAG}" )
fi
if [ "x${VAGRANT}" = "xyes" ]; then
s#__WORKBENCH1_INT_IP__#${WORKBENCH1_INT_IP}#g;
s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
- s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
+ s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g;
+ s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
+ s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION}#g;
+ s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g" \
"${f}" > "${P_DIR}"/$(basename "${f}")
done
s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
- s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g" \
+ s#__WORKBENCH_SECRET_KEY__#${WORKBENCH_SECRET_KEY}#g;
+ s#__SSL_KEY_ENCRYPTED__#${SSL_KEY_ENCRYPTED}#g;
+ s#__SSL_KEY_AWS_REGION__#${SSL_KEY_AWS_REGION}#g;
+ s#__SSL_KEY_AWS_SECRET_NAME__#${SSL_KEY_AWS_SECRET_NAME}#g" \
"${f}" > "${F_DIR}/extra/extra"/$(basename "${f}")
done
fi
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - extra.aws_credentials" >> ${S_DIR}/top.sls
fi
- grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
+ grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
else
- mkdir -p /srv/salt/certs
+ mkdir -p --mode=0700 /srv/salt/certs
if [ "${SSL_MODE}" = "bring-your-own" ]; then
# Copy certs to formula extra/files
- cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
+ install --mode=0600 ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
# We add the custom_certs state
- grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
+ grep -q "ssl_key_encrypted" ${S_DIR}/top.sls || echo " - extra.ssl_key_encrypted" >> ${S_DIR}/top.sls
+ fi
fi
# In self-signed mode, the certificate files will be created and put in the
# destination directory by the snakeoil_certs.sls state file
fi
echo " - postgres" >> ${S_DIR}/top.sls
+ echo " - logrotate" >> ${S_DIR}/top.sls
echo " - docker.software" >> ${S_DIR}/top.sls
echo " - arvados" >> ${S_DIR}/top.sls
echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
# Pillars
echo " - docker" >> ${P_DIR}/top.sls
echo " - nginx_api_configuration" >> ${P_DIR}/top.sls
+ echo " - logrotate_api" >> ${P_DIR}/top.sls
echo " - nginx_controller_configuration" >> ${P_DIR}/top.sls
echo " - nginx_keepproxy_configuration" >> ${P_DIR}/top.sls
echo " - nginx_keepweb_configuration" >> ${P_DIR}/top.sls
echo " - nginx_webshell_configuration" >> ${P_DIR}/top.sls
echo " - nginx_workbench2_configuration" >> ${P_DIR}/top.sls
echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
+ echo " - logrotate_wb1" >> ${P_DIR}/top.sls
echo " - postgresql" >> ${P_DIR}/top.sls
# We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
echo " - arvados.repo" >> ${S_DIR}/top.sls
# We add the extra_custom_certs state
grep -q "extra.custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ if [ "${SSL_KEY_ENCRYPTED}" = "yes" ]; then
+ grep -q "ssl_key_encrypted" ${S_DIR}/top.sls || echo " - extra.ssl_key_encrypted" >> ${S_DIR}/top.sls
+ fi
# And we add the basic part for the certs pillar
if [ "${SSL_MODE}" != "lets-encrypt" ]; then
;;
"api")
# States
- # FIXME: https://dev.arvados.org/issues/17352
- grep -q "postgres.client" ${S_DIR}/top.sls || echo " - postgres.client" >> ${S_DIR}/top.sls
+ grep -q " - logrotate" ${S_DIR}/top.sls || echo " - logrotate" >> ${S_DIR}/top.sls
if grep -q " - nginx.*$" ${S_DIR}/top.sls; then
sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
else
fi
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
# Pillars
+ grep -q "logrotate_api" ${P_DIR}/top.sls || echo " - logrotate_api" >> ${P_DIR}/top.sls
grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
;;
"controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
- NGINX_INSTALL_SOURCE="install_from_repo"
# States
if [ "${R}" = "workbench" ]; then
+ grep -q " - logrotate" ${S_DIR}/top.sls || echo " - logrotate" >> ${S_DIR}/top.sls
NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
if grep -q " - nginx$" ${S_DIR}/top.sls; then
sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
fi
# Pillars
+ if [ "${R}" = "workbench" ]; then
+ grep -q "logrotate_wb1" ${P_DIR}/top.sls || echo " - logrotate_wb1" >> ${P_DIR}/top.sls
+ fi
grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
# Special case for keepweb
${P_DIR}/nginx_${R}_configuration.sls
fi
else
+ grep -q "ssl_key_encrypted" ${P_DIR}/top.sls || echo " - ssl_key_encrypted" >> ${P_DIR}/top.sls
# As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
# Special case for keepweb
if [ ${R} = "keepweb" ]; then
s#__CERT_PEM__#/etc/nginx/ssl/arvados-${R}.pem#g;
s#__CERT_KEY__#/etc/nginx/ssl/arvados-${R}.key#g" \
${P_DIR}/nginx_${R}_configuration.sls
- grep -q ${R}$ ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
+ grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
fi
fi
# We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
fi
# Now run the install
-salt-call --local state.apply -l ${LOG_LEVEL}
+salt-call --state-output=mixed --local state.apply -l ${LOG_LEVEL}
# Finally, make sure that /etc/hosts is not overwritten on reboot
if [ -d /etc/cloud/cloud.cfg.d ]; then
fi
# Leave a copy of the Arvados CA so the user can copy it where it's required
-if [ "$DEV_MODE" = "yes" ]; then
- ARVADOS_SNAKEOIL_CA_DEST_FILE="${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
-
- # If running in a vagrant VM, also add default user to docker group
+if [ "${SSL_MODE}" = "self-signed" ]; then
+ echo "Copying the Arvados CA certificate '${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.crt' to the installer dir, so you can import it"
if [ "x${VAGRANT}" = "xyes" ]; then
+ cp /etc/ssl/certs/arvados-snakeoil-ca.pem /vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem
+ else
+ cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${SCRIPT_DIR}/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.crt
+ fi
+fi
+
+if [ "x${VAGRANT}" = "xyes" ]; then
+ # If running in a vagrant VM, also add default user to docker group
echo "Adding the vagrant user to the docker group"
usermod -a -G docker vagrant
- ARVADOS_SNAKEOIL_CA_DEST_FILE="/vagrant/${CLUSTER}.${DOMAIN}-arvados-snakeoil-ca.pem"
- fi
- if [ -f /etc/ssl/certs/arvados-snakeoil-ca.pem ]; then
- echo "Copying the Arvados CA certificate to the installer dir, so you can import it"
- cp /etc/ssl/certs/arvados-snakeoil-ca.pem ${ARVADOS_SNAKEOIL_CA_DEST_FILE}
- fi
fi
# Test that the installation finished correctly
projects / arvados.git / blobdiff