-// A Volume is an interface representing a Keep back-end storage unit:
-// for example, a single mounted disk, a RAID array, an Amazon S3 volume,
-// etc.
-
package main
import (
"time"
)
+// A Volume is an interface representing a Keep back-end storage unit:
+// for example, a single mounted disk, a RAID array, an Amazon S3 volume,
+// etc.
type Volume interface {
- // Get a block. IFF the returned error is nil, the caller must
- // put the returned slice back into the buffer pool when it's
- // finished with it.
- Get(loc string) ([]byte, error)
+ // Get a block: copy the block data into buf, and return the
+ // number of bytes copied.
+ //
+ // loc is guaranteed to consist of 32 or more lowercase hex
+ // digits.
+ //
+ // Get should not verify the integrity of the data: it should
+ // just return whatever was found in its backing
+ // store. (Integrity checking is the caller's responsibility.)
+ //
+ // If an error is encountered that prevents it from
+ // retrieving the data, that error should be returned so the
+ // caller can log (and send to the client) a more useful
+ // message.
+ //
+ // If the error is "not found", and there's no particular
+ // reason to expect the block to be found (other than that a
+ // caller is asking for it), the returned error should satisfy
+ // os.IsNotExist(err): this is a normal condition and will not
+ // be logged as an error (except that a 404 will appear in the
+ // access log if the block is not found on any other volumes
+ // either).
+ //
+ // If the data in the backing store is bigger than len(buf),
+ // then Get is permitted to return an error without reading
+ // any of the data.
+ //
+ // len(buf) will not exceed BlockSize.
+ Get(loc string, buf []byte) (int, error)
+
+ // Compare the given data with the stored data (i.e., what Get
+ // would return). If equal, return nil. If not, return
+ // CollisionError or DiskHashError (depending on whether the
+ // data on disk matches the expected hash), or whatever error
+ // was encountered opening/reading the stored data.
+ Compare(loc string, data []byte) error
+
+ // Put writes a block to an underlying storage device.
+ //
+ // loc is as described in Get.
+ //
+ // len(block) is guaranteed to be between 0 and BlockSize.
+ //
+ // If a block is already stored under the same name (loc) with
+ // different content, Put must either overwrite the existing
+ // data with the new data or return a non-nil error. When
+ // overwriting existing data, it must never leave the storage
+ // device in an inconsistent state: a subsequent call to Get
+ // must return either the entire old block, the entire new
+ // block, or an error. (An implementation that cannot peform
+ // atomic updates must leave the old data alone and return an
+ // error.)
+ //
+ // Put also sets the timestamp for the given locator to the
+ // current time.
+ //
+ // Put must return a non-nil error unless it can guarantee
+ // that the entire block has been written and flushed to
+ // persistent storage, and that its timestamp is current. Of
+ // course, this guarantee is only as good as the underlying
+ // storage device, but it is Put's responsibility to at least
+ // get whatever guarantee is offered by the storage device.
+ //
+ // Put should not verify that loc==hash(block): this is the
+ // caller's responsibility.
Put(loc string, block []byte) error
+
+ // Touch sets the timestamp for the given locator to the
+ // current time.
+ //
+ // loc is as described in Get.
+ //
+ // If invoked at time t0, Touch must guarantee that a
+ // subsequent call to Mtime will return a timestamp no older
+ // than {t0 minus one second}. For example, if Touch is called
+ // at 2015-07-07T01:23:45.67890123Z, it is acceptable for a
+ // subsequent Mtime to return any of the following:
+ //
+ // - 2015-07-07T01:23:45.00000000Z
+ // - 2015-07-07T01:23:45.67890123Z
+ // - 2015-07-07T01:23:46.67890123Z
+ // - 2015-07-08T00:00:00.00000000Z
+ //
+ // It is not acceptable for a subsequente Mtime to return
+ // either of the following:
+ //
+ // - 2015-07-07T00:00:00.00000000Z -- ERROR
+ // - 2015-07-07T01:23:44.00000000Z -- ERROR
+ //
+ // Touch must return a non-nil error if the timestamp cannot
+ // be updated.
Touch(loc string) error
+
+ // Mtime returns the stored timestamp for the given locator.
+ //
+ // loc is as described in Get.
+ //
+ // Mtime must return a non-nil error if the given block is not
+ // found or the timestamp could not be retrieved.
Mtime(loc string) (time.Time, error)
+
+ // IndexTo writes a complete list of locators with the given
+ // prefix for which Get() can retrieve data.
+ //
+ // prefix consists of zero or more lowercase hexadecimal
+ // digits.
+ //
+ // Each locator must be written to the given writer using the
+ // following format:
+ //
+ // loc "+" size " " timestamp "\n"
+ //
+ // where:
+ //
+ // - size is the number of bytes of content, given as a
+ // decimal number with one or more digits
+ //
+ // - timestamp is the timestamp stored for the locator,
+ // given as a decimal number of seconds after January 1,
+ // 1970 UTC.
+ //
+ // IndexTo must not write any other data to writer: for
+ // example, it must not write any blank lines.
+ //
+ // If an error makes it impossible to provide a complete
+ // index, IndexTo must return a non-nil error. It is
+ // acceptable to return a non-nil error after writing a
+ // partial index to writer.
+ //
+ // The resulting index is not expected to be sorted in any
+ // particular order.
IndexTo(prefix string, writer io.Writer) error
- Delete(loc string) error
+
+ // Trash moves the block data from the underlying storage
+ // device to trash area. The block then stays in trash for
+ // -trash-lifetime interval before it is actually deleted.
+ //
+ // loc is as described in Get.
+ //
+ // If the timestamp for the given locator is newer than
+ // blobSignatureTTL, Trash must not trash the data.
+ //
+ // If a Trash operation overlaps with any Touch or Put
+ // operations on the same locator, the implementation must
+ // ensure one of the following outcomes:
+ //
+ // - Touch and Put return a non-nil error, or
+ // - Trash does not trash the block, or
+ // - Both of the above.
+ //
+ // If it is possible for the storage device to be accessed by
+ // a different process or host, the synchronization mechanism
+ // should also guard against races with other processes and
+ // hosts. If such a mechanism is not available, there must be
+ // a mechanism for detecting unsafe configurations, alerting
+ // the operator, and aborting or falling back to a read-only
+ // state. In other words, running multiple keepstore processes
+ // with the same underlying storage device must either work
+ // reliably or fail outright.
+ //
+ // Corollary: A successful Touch or Put guarantees a block
+ // will not be trashed for at least blobSignatureTTL
+ // seconds.
+ Trash(loc string) error
+
+ // Untrash moves block from trash back into store
+ Untrash(loc string) error
+
+ // Status returns a *VolumeStatus representing the current
+ // in-use and available storage capacity and an
+ // implementation-specific volume identifier (e.g., "mount
+ // point" for a UnixVolume).
Status() *VolumeStatus
+
+ // String returns an identifying label for this volume,
+ // suitable for including in log messages. It should contain
+ // enough information to uniquely identify the underlying
+ // storage device, but should not contain any credentials or
+ // secrets.
String() string
+
+ // Writable returns false if all future Put, Mtime, and Delete
+ // calls are expected to fail.
+ //
+ // If the volume is only temporarily unwritable -- or if Put
+ // will fail because it is full, but Mtime or Delete can
+ // succeed -- then Writable should return false.
Writable() bool
+
+ // Replication returns the storage redundancy of the
+ // underlying device. It will be passed on to clients in
+ // responses to PUT requests.
+ Replication() int
+
+ // EmptyTrash looks for trashed blocks that exceeded trashLifetime
+ // and deletes them from the volume.
+ EmptyTrash()
}
// A VolumeManager tells callers which volumes can read, which volumes
type VolumeManager interface {
// AllReadable returns all volumes.
AllReadable() []Volume
+
// AllWritable returns all volumes that aren't known to be in
// a read-only state. (There is no guarantee that a write to
// one will succeed, though.)
AllWritable() []Volume
+
// NextWritable returns the volume where the next new block
// should be written. A VolumeManager can select a volume in
// order to distribute activity across spindles, fill up disks
// with more free space, etc.
NextWritable() Volume
+
// Close shuts down the volume manager cleanly.
Close()
}
+// RRVolumeManager is a round-robin VolumeManager: the Nth call to
+// NextWritable returns the (N % len(writables))th writable Volume
+// (where writables are all Volumes v where v.Writable()==true).
type RRVolumeManager struct {
readables []Volume
writables []Volume
counter uint32
}
+// MakeRRVolumeManager initializes RRVolumeManager
func MakeRRVolumeManager(volumes []Volume) *RRVolumeManager {
vm := &RRVolumeManager{}
for _, v := range volumes {
return vm
}
+// AllReadable returns an array of all readable volumes
func (vm *RRVolumeManager) AllReadable() []Volume {
return vm.readables
}
+// AllWritable returns an array of all writable volumes
func (vm *RRVolumeManager) AllWritable() []Volume {
return vm.writables
}
+// NextWritable returns the next writable
func (vm *RRVolumeManager) NextWritable() Volume {
if len(vm.writables) == 0 {
return nil
return vm.writables[i%uint32(len(vm.writables))]
}
+// Close the RRVolumeManager
func (vm *RRVolumeManager) Close() {
}
+
+// VolumeStatus provides status information of the volume consisting of:
+// * mount_point
+// * device_num (an integer identifying the underlying storage system)
+// * bytes_free
+// * bytes_used
+type VolumeStatus struct {
+ MountPoint string `json:"mount_point"`
+ DeviceNum uint64 `json:"device_num"`
+ BytesFree uint64 `json:"bytes_free"`
+ BytesUsed uint64 `json:"bytes_used"`
+}
projects / arvados.git / blobdiff