# This will be populated by loadconfig()
declare USE_SSH_JUMPHOST
+# The temp file that will get used to disable envvar forwarding to avoid locale
+# issues in Debian distros.
+# This will be populated by loadconfig()
+declare SSH_CONFFILE
+
checktools() {
local MISSING=''
for a in git ip ; do
fi
}
+cleanup() {
+ local NODE=$1
+ local SSH=`ssh_cmd "$NODE"`
+ # Delete the old repository
+ $SSH $DEPLOY_USER@$NODE rm -rf ${GITTARGET}.git ${GITTARGET}
+}
+
sync() {
local NODE=$1
local BRANCH=$2
# each node, pushing our branch, and updating the checkout.
if [[ "$NODE" != localhost ]] ; then
- SSH=`ssh_cmd "$NODE"`
- GIT="eval `git_cmd $NODE`"
- if ! $SSH $DEPLOY_USER@$NODE test -d ${GITTARGET}.git ; then
-
- # Initialize the git repository (1st time case). We're
- # actually going to make two repositories here because git
- # will complain if you try to push to a repository with a
- # checkout. So we're going to create a "bare" repository
- # and then clone a regular repository (with a checkout)
- # from that.
-
- $SSH $DEPLOY_USER@$NODE git init --bare --shared=0600 ${GITTARGET}.git
- if ! $GIT remote add $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git ; then
- $GIT remote set-url $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git
- fi
- $GIT push $NODE $BRANCH
- $SSH $DEPLOY_USER@$NODE "umask 0077 && git clone ${GITTARGET}.git ${GITTARGET}"
- fi
+ SSH=`ssh_cmd "$NODE"`
+ GIT="eval `git_cmd $NODE`"
+
+ cleanup $NODE
- # The update case.
- #
- # Push to the bare repository on the remote node, then in the
- # remote node repository with the checkout, pull the branch
- # from the bare repository.
+ # Update the git remote for the remote repository.
+ if ! $GIT remote add $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git ; then
+ $GIT remote set-url $NODE $DEPLOY_USER@$NODE:${GITTARGET}.git
+ fi
- $GIT push $NODE $BRANCH
- $SSH $DEPLOY_USER@$NODE "git -C ${GITTARGET} checkout ${BRANCH} && git -C ${GITTARGET} pull"
+ # Initialize the git repository. We're
+ # actually going to make two repositories here because git
+ # will complain if you try to push to a repository with a
+ # checkout. So we're going to create a "bare" repository
+ # and then clone a regular repository (with a checkout)
+ # from that.
+
+ $SSH $DEPLOY_USER@$NODE git init --bare --shared=0600 ${GITTARGET}.git
+ $GIT push $NODE $BRANCH
+ $SSH $DEPLOY_USER@$NODE "umask 0077 && git clone -s ${GITTARGET}.git ${GITTARGET} && git -C ${GITTARGET} checkout ${BRANCH}"
fi
}
fi
logfile=deploy-${NODE}-$(date -Iseconds).log
- SSH=`ssh_cmd "$NODE"`
+ SSH=`ssh_cmd "$NODE"`
if [[ "$NODE" = localhost ]] ; then
SUDO=''
SUDO=sudo
fi
$SUDO ./provision.sh --config ${CONFIG_FILE} ${ROLES} 2>&1 | tee $logfile
- else
- $SSH $DEPLOY_USER@$NODE "cd ${GITTARGET} && sudo ./provision.sh --config ${CONFIG_FILE} ${ROLES}" 2>&1 | tee $logfile
+ else
+ $SSH $DEPLOY_USER@$NODE "cd ${GITTARGET} && git log -n1 HEAD && sudo ./provision.sh --config ${CONFIG_FILE} ${ROLES}" 2>&1 | tee $logfile
+ cleanup $NODE
fi
}
loadconfig() {
- if [[ ! -s $CONFIG_FILE ]] ; then
+ if ! [[ -s ${CONFIG_FILE} && -s ${CONFIG_FILE}.secrets ]]; then
echo "Must be run from initialized setup dir, maybe you need to 'initialize' first?"
fi
+ source ${CONFIG_FILE}.secrets
source ${CONFIG_FILE}
GITTARGET=arvados-deploy-config-${CLUSTER}
+
+ # Set up SSH so that it doesn't forward any environment variable. This is to avoid
+ # getting "setlocale" errors on the first run, depending on the distro being used
+ # to run the installer (like Debian).
+ SSH_CONFFILE=$(mktemp)
+ echo "Include config SendEnv -*" > ${SSH_CONFFILE}
}
ssh_cmd() {
local NODE=$1
if [ -z "${USE_SSH_JUMPHOST}" -o "${NODE}" == "${USE_SSH_JUMPHOST}" -o "${NODE}" == "localhost" ]; then
- echo "ssh"
+ echo "ssh -F ${SSH_CONFFILE}"
else
- echo "ssh -J ${DEPLOY_USER}@${USE_SSH_JUMPHOST}"
+ echo "ssh -F ${SSH_CONFFILE} -J ${DEPLOY_USER}@${USE_SSH_JUMPHOST}"
fi
}
cp -r *.sh tests $SETUPDIR
cp local.params.example.$PARAMS $SETUPDIR/${CONFIG_FILE}
+ cp local.params.secrets.example $SETUPDIR/${CONFIG_FILE}.secrets
cp -r config_examples/$SLS $SETUPDIR/${CONFIG_DIR}
if [[ -n "$TERRAFORM" ]] ; then
git add terraform
fi
- git add *.sh ${CONFIG_FILE} ${CONFIG_DIR} tests .gitignore
+ git add *.sh ${CONFIG_FILE} ${CONFIG_FILE}.secrets ${CONFIG_DIR} tests .gitignore
git commit -m"initial commit"
echo
(cd $SETUPDIR/terraform/services && terraform init)
echo "Now go to $SETUPDIR, customize 'terraform/vpc/terraform.tfvars' as needed, then run 'installer.sh terraform'"
else
- echo "Now go to $SETUPDIR, customize '${CONFIG_FILE}' and '${CONFIG_DIR}' as needed, then run 'installer.sh deploy'"
+ echo "Now go to $SETUPDIR, customize '${CONFIG_FILE}', '${CONFIG_FILE}.secrets' and '${CONFIG_DIR}' as needed, then run 'installer.sh deploy'"
fi
;;
loadconfig
- if grep -rni 'fixme' ${CONFIG_FILE} ${CONFIG_DIR} ; then
+ if grep -rni 'fixme' ${CONFIG_FILE} ${CONFIG_FILE}.secrets ${CONFIG_DIR} ; then
echo
echo "Some parameters still need to be updated. Please fix them and then re-run deploy."
exit 1
set -x
git add -A
- if ! git diff --cached --exit-code ; then
+ if ! git diff --cached --exit-code --quiet ; then
git commit -m"prepare for deploy"
fi
for NODE in "${!NODES[@]}"
do
- # then 'api' or 'controller' roles
+ # then 'balancer' role
+ if [[ "${NODES[$NODE]}" =~ (balancer) ]] ; then
+ deploynode $NODE "${NODES[$NODE]}"
+ unset NODES[$NODE]
+ fi
+ done
+
+ for NODE in "${!NODES[@]}"
+ do
+ # then 'api' or 'controller' roles
if [[ "${NODES[$NODE]}" =~ (api|controller) ]] ; then
deploynode $NODE "${NODES[$NODE]}"
unset NODES[$NODE]