+
+{% assign pg_service = "postgresql" %}
+{% assign pg_hba_path = "/var/lib/pgsql/data/pg_hba.conf" %}
+{% include 'install_redhat_postgres_auth' %}
+
+Next, generate a new database password. Nobody ever needs to memorize it or type it, so make a strong one:
+
+<notextile>
+<pre><code>~$ <span class="userinput">ruby -e 'puts rand(2**128).to_s(36)'</span>
+abcdefghijklmnopqrstuvwxyz012345689
+</code></pre></notextile>
+
+Configure the SSO server to connect to your database by updating @/etc/arvados/sso/database.yml@. Replace the @xxxxxxxx@ database password placeholder with the new password you generated above. Be sure to update the @production@ section.
+
+<notextile>
+<pre><code>~$ <span class="userinput">editor /etc/arvados/sso/database.yml</span>
+</code></pre></notextile>
+
+Create a new database user with permission to create its own databases.
+
+<notextile>
+<pre><code>~$ <span class="userinput">sudo -u postgres createuser --createdb --encrypted -R -S --pwprompt arvados_sso</span>
+Enter password for new role: <span class="userinput">paste-database-password-you-generated</span>
+Enter it again: <span class="userinput">paste-database-password-you-generated</span>
+</code></pre></notextile>
+
+Rails will take care of creating the database, based on the information from @/etc/arvados/sso/database.yml@.
+
+Alternatively, if the database user you intend to use for the SSO server should not be allowed to create new databases, the user and the database can be created like this:
+
+<notextile>
+<pre><code>~$ <span class="userinput">sudo -u postgres createuser --encrypted -R -S --pwprompt arvados_sso</span>
+Enter password for new role: <span class="userinput">paste-database-password-you-generated</span>
+Enter it again: <span class="userinput">paste-database-password-you-generated</span>
+~$ <span class="userinput">sudo -u postgres createdb arvados_sso_production -E UTF8 -O arvados_sso -T template0</span>
+</code></pre></notextile>
+
+h2(#reconfigure_package). Reconfigure the package
+
+{% assign railspkg = "arvados-sso-server" %}
+{% include 'install_rails_reconfigure' %}
+
+h2(#client). Create arvados-server client
+
+{% assign railshost = "" %}
+{% assign railsdir = "/var/www/arvados-sso/current" %}
+Use @rails console@ to create a @Client@ record that will be used by the Arvados API server. {% include 'install_rails_command' %}
+
+Enter the following commands at the console. The values that appear after you assign @app_id@ and @app_secret@ correspond to the values for @sso_app_id@ and @sso_app_secret@, respectively, in the "API server's SSO settings":install-api-server.html#omniauth.
+
+<notextile>
+<pre><code>:001 > <span class="userinput">c = Client.new</span>
+:002 > <span class="userinput">c.name = "joshid"</span>
+:003 > <span class="userinput">c.app_id = "arvados-server"</span>
+:004 > <span class="userinput">c.app_secret = rand(2**400).to_s(36)</span>
+=> "<strong>save this string for your API server's sso_app_secret</strong>"
+:005 > <span class="userinput">c.save!</span>
+:006 > <span class="userinput">quit</span>
+</code></pre>
+</notextile>
+
+h2(#configure_web_server). Configure your web server
+
+Edit the http section of your Nginx configuration to run the Passenger server and act as a frontend for it. You might add a block like the following, adding SSL and logging parameters to taste:
+
+<notextile>
+<pre><code>server {
+ listen 127.0.0.1:8900;
+ server_name localhost-sso;
+
+ root /var/www/arvados-sso/current/public;
+ index index.html;
+
+ passenger_enabled on;
+ # If you're not using RVM, comment out the line below.
+ passenger_ruby /usr/local/rvm/wrappers/default/ruby;
+}
+
+upstream sso {
+ server 127.0.0.1:8900 fail_timeout=10s;
+}
+
+proxy_http_version 1.1;
+
+server {
+ listen <span class="userinput">[your public IP address]</span>:443 ssl;
+ server_name auth.<span class="userinput">your.domain</span>;
+
+ ssl on;
+ ssl_certificate <span class="userinput">/YOUR/PATH/TO/cert.pem</span>;
+ ssl_certificate_key <span class="userinput">/YOUR/PATH/TO/cert.key</span>;
+
+ index index.html;
+
+ location / {
+ proxy_pass http://sso;
+ proxy_redirect off;
+ proxy_connect_timeout 90s;
+ proxy_read_timeout 300s;
+
+ proxy_set_header X-Forwarded-Proto https;
+ proxy_set_header Host $http_host;
+ proxy_set_header X-Real-IP $remote_addr;
+ proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+ }
+}
+</code></pre>
+</notextile>
+
+Finally, restart Nginx and your Arvados SSO server should be up and running. You can verify that by visiting the URL you configured your Nginx web server to listen on in the server section above (port 443). Read on if you want to configure your Arvados SSO server to use a different authentication backend.
+
+h2(#authentication_methods). Authentication methods
+
+Authentication methods are configured in @application.yml@. Currently three authentication methods are supported: local accounts, LDAP, and Google+. If neither Google+ nor LDAP are enabled, the SSO server defaults to local user accounts. Only one authentication mechanism should be in use at a time.
+
+h3(#local_accounts). Local account authentication
+
+There are two configuration options for local accounts:
+
+<pre>
+ # If true, allow new creation of new accounts in the SSO server's internal
+ # user database.
+ allow_account_registration: false
+
+ # If true, send an email confirmation before activating new accounts in the
+ # SSO server's internal user database (otherwise users are activated immediately.)
+ require_email_confirmation: false
+</pre>
+
+For more information about configuring backend support for sending email (required to send email confirmations) see "Configuring Action Mailer":http://guides.rubyonrails.org/configuring.html#configuring-action-mailer
+
+If @allow_account_registration@ is false, you may manually create local accounts on the SSO server from the Rails console. {% include 'install_rails_command' %}
+
+Enter the following commands at the console.
+
+<notextile>
+<pre><code>:001 > <span class="userinput">user = User.new(:email => "test@example.com")</span>
+:002 > <span class="userinput">user.password = "passw0rd"</span>
+:003 > <span class="userinput">user.save!</span>
+:004 > <span class="userinput">quit</span>
+</code></pre>
+</notextile>
+
+h3(#ldap). LDAP authentication
+
+The following options are available to configure LDAP authentication. Note that you must preserve the indentation of the fields listed under @use_ldap@.
+
+<pre>
+ use_ldap:
+ title: Example LDAP
+ host: ldap.example.com
+ port: 636
+ method: ssl
+ base: "ou=Users, dc=example, dc=com"
+ uid: uid
+ email_domain: example.com
+ #bind_dn: "some_user"
+ #password: "some_password"
+</pre>
+
+table(table).
+|_. Option|_. Description|
+|title |Title displayed to the user on the login page|
+|host |LDAP server hostname|
+|port |LDAP server port|
+|method|One of "plain", "ssl", "tls"|
+|base |Directory lookup base|
+|uid |User id field used for directory lookup|
+|email_domain|Strip off specified email domain from login and perform lookup on bare username|
+|bind_dn|If required by server, username to log with in before performing directory lookup|
+|password|If required by server, password to log with before performing directory lookup|
+
+h3(#google). Google+ authentication
+
+In order to use Google+ authentication, you must use the <a href="https://console.developers.google.com" target="_blank">Google Developers Console</a> to create a set of client credentials.
+
+# Go to the <a href="https://console.developers.google.com" target="_blank">Google Developers Console</a> and select or create a project; this will take you to the project page.
+# On the sidebar, click on *APIs & auth* then select *APIs*.
+## Search for *Contacts API* and click on *Enable API*.
+## Search for *Google+ API* and click on *Enable API*.
+# On the sidebar, click on *Credentials*; under *OAuth* click on *Create new Client ID* to bring up the *Create Client ID* dialog box.
+# Under *Application type* select *Web application*.
+# If the authorization origins are not displayed, clicking on *Create Client ID* will take you to *Consent screen* settings.
+## On consent screen settings, enter the appropriate details and click on *Save*.
+## This will return you to the *Create Client ID* dialog box.
+# You must set the authorization origins. Edit @sso.your-site.com@ to the appropriate hostname that you will use to access the SSO service:
+## JavaScript origin should be @https://sso.your-site.com/@
+## Redirect URI should be @https://sso.your-site.com/users/auth/google_oauth2/callback@
+# Copy the values of *Client ID* and *Client secret* from the Google Developers Console into the Google section of @config/application.yml@, like this:
+
+<notextile>
+<pre><code> # Google API tokens required for OAuth2 login.
+ google_oauth2_client_id: <span class="userinput">"---YOUR---CLIENT---ID---HERE--"-</span>
+ google_oauth2_client_secret: <span class="userinput">"---YOUR---CLIENT---SECRET---HERE--"-</span></code></pre></notextile>