h2. Install prerequisites
-The Arvados package repository includes Workbench server package that can help automate much of the deployment. It requires:
+The Arvados package repository includes a Workbench server package that can help automate much of the deployment.
-* "Ruby 2.1 and bundler":install-manual-prerequisites-ruby.html
-* The Arvados Python SDK
-* Graphviz
-* Build tools to build gem dependencies
-* Nginx
+h3(#install_ruby_and_bundler). Install Ruby and Bundler
-Workbench doesn't need its own database, so it does not need to have PostgreSQL installed.
+{% include 'install_ruby_and_bundler' %}
+
+h2(#install_workbench). Install Workbench and dependencies
-On older distributions, you may need to use a backports repository to satisfy these requirements. For example, on older Red Hat-based systems, consider using the "nginx16":https://www.softwarecollections.org/en/scls/rhscl/nginx16/ Software Collection.
+Workbench doesn't need its own database, so it does not need to have PostgreSQL installed.
On a Debian-based system, install the following packages:
<notextile>
-<pre><code>~$ <span class="userinput">sudo apt-get install bison build-essential graphviz git nginx python-arvados-python-client arvados-workbench</span>
+<pre><code>~$ <span class="userinput">sudo apt-get install bison build-essential graphviz git python-arvados-python-client arvados-workbench</span>
</code></pre>
</notextile>
On a Red Hat-based system, install the following packages:
<notextile>
-<pre><code>~$ <span class="userinput">sudo yum install bison make automake gcc gcc-c++ graphviz git nginx python27-python-arvados-python-client arvados-workbench</span>
+<pre><code>~$ <span class="userinput">sudo yum install bison make automake gcc gcc-c++ graphviz git python27-python-arvados-python-client arvados-workbench</span>
</code></pre>
</notextile>
-{% include 'notebox_begin' %}
-
-If you intend to use specific versions of these packages from Software Collections, you may have to adapt some of the package names to match; e.g., @nginx16@.
-
-{% include 'notebox_end' %}
-
{% include 'note_python27_sc' %}
h2. Set up configuration files
</code></pre>
</notextile>
-h2. Configure Workbench
+h2(#configure). Configure Workbench
Edit @/etc/arvados/workbench/application.yml@ following the instructions below. The deployment script will consistently deploy this to Workbench's configuration directory. Workbench reads both @application.yml@ and its own @config/application.defaults.yml@ file. Values in @application.yml@ take precedence over the defaults that are defined in @config/application.defaults.yml@. The @config/application.yml.example@ file is not read by Workbench and is provided for installation convenience only.
In @/var/www/arvados-workbench/current/config@, copy @piwik.yml.example@ to @piwik.yml@ and edit to suit.
-h2. Prepare the Workbench deployment
-
-Now that all your configuration is in place, run @/usr/local/bin/arvados-workbench-upgrade.sh@. This will install and check your configuration, and install necessary gems.
-
-{% include 'notebox_begin' %}
-You can safely ignore the following error message you may see when installing gems:
-<notextile>
-<pre><code>themes_for_rails at /usr/local/rvm/gems/ruby-2.1.1/bundler/gems/themes_for_rails-1fd2d7897d75 did not have a valid gemspec.
-This prevents bundler from installing bins or native extensions, but that may not affect its functionality.
-The validation message from Rubygems was:
- duplicate dependency on rails (= 3.0.11, development), (>= 3.0.0) use:
- add_runtime_dependency 'rails', '= 3.0.11', '>= 3.0.0'
-Using themes_for_rails (0.5.1) from https://github.com/holtkampw/themes_for_rails (at 1fd2d78)
-</code></pre>
-</notextile>
-{% include 'notebox_end' %}
-
-This command aborts when it encounters an error. It's safe to rerun multiple times, so if there's a problem with your configuration, you can fix that and try again.
-
h2. Set up Web server
For best performance, we recommend you use Nginx as your Web server front-end, with a Passenger backend to serve Workbench. To do that:
<notextile>
<ol>
-<li>Install Nginx via your distribution or a backports repository.</li>
+<li><a href="https://www.phusionpassenger.com/library/walkthroughs/deploy/ruby/ownserver/nginx/oss/install_passenger_main.html">Install Nginx and Phusion Passenger</a>.</li>
+
+<li>If you're deploying on CentOS and using the python27 Software Collection, configure Nginx to use it:
-<li><a href="https://www.phusionpassenger.com/documentation/Users%20guide%20Nginx.html">Install Phusion Passenger for Nginx</a>.</li>
+<pre><code>~$ <span class="userinput">sudo usermod --shell /bin/bash nginx</span>
+~$ <span class="userinput">sudo -u nginx sh -c 'echo "[[ -z \$PS1 && -e /opt/rh/python27/enable ]] && source /opt/rh/python27/enable" >>~/.bash_profile'</span>
+</code></pre>
+
+</li>
<li><p>Edit the http section of your Nginx configuration to run the Passenger server, and act as a front-end for it. You might add a block like the following, adding SSL and logging parameters to taste:</p>
passenger_enabled on;
# If you're using RVM, uncomment the line below.
#passenger_ruby /usr/local/rvm/wrappers/default/ruby;
+
+ # `client_max_body_size` should match the corresponding setting in
+ # the API server's Nginx configuration.
+ client_max_body_size 128m;
}
upstream workbench {
server_name workbench.<span class="userinput">uuid-prefix.your.domain</span>;
ssl on;
+ ssl_certificate <span class="userinput">/YOUR/PATH/TO/cert.pem</span>;
+ ssl_certificate_key <span class="userinput">/YOUR/PATH/TO/cert.key</span>;
index index.html index.htm index.php;
+ # `client_max_body_size` should match the corresponding setting in
+ # the API server's Nginx configuration.
+ client_max_body_size 128m;
location / {
proxy_pass http://workbench;
proxy_redirect off;
+ proxy_connect_timeout 90s;
+ proxy_read_timeout 300s;
proxy_set_header X-Forwarded-Proto https;
proxy_set_header Host $http_host;
- proxy_set_header X-External-Client $external_client;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
</ol>
</notextile>
+h2. Prepare the Workbench deployment
+
+Now that all your configuration is in place, run @/usr/local/bin/arvados-workbench-upgrade.sh@. This will install and check your configuration, and install necessary gems.
+
+{% include 'notebox_begin' %}
+You can safely ignore the following error message you may see when installing gems:
+<notextile>
+<pre><code>themes_for_rails at /usr/local/rvm/gems/ruby-2.1.1/bundler/gems/themes_for_rails-1fd2d7897d75 did not have a valid gemspec.
+This prevents bundler from installing bins or native extensions, but that may not affect its functionality.
+The validation message from Rubygems was:
+ duplicate dependency on rails (= 3.0.11, development), (>= 3.0.0) use:
+ add_runtime_dependency 'rails', '= 3.0.11', '>= 3.0.0'
+Using themes_for_rails (0.5.1) from https://github.com/holtkampw/themes_for_rails (at 1fd2d78)
+</code></pre>
+</notextile>
+{% include 'notebox_end' %}
+
+This command aborts when it encounters an error. It's safe to rerun multiple times, so if there's a problem with your configuration, you can fix that and try again.
+
h2. Trusted client setting
Log in to Workbench once to ensure that the Arvados API server has a record of the Workbench client. (It's OK if Workbench says your account hasn't been activated yet. We'll deal with that next.)
<notextile>
<pre><code>/var/www/arvados-api/current$ <span class="userinput">RAILS_ENV=production bundle exec rails console</span>
irb(main):001:0> <span class="userinput">Thread.current[:user] = User.all.select(&:identity_url).last</span>
-irb(main):002:0> <span class="userinput">Thread.current[:user].is_admin = true</span>
-irb(main):003:0> <span class="userinput">Thread.current[:user].update_attributes is_admin: true, is_active: true</span>
-irb(main):004:0> <span class="userinput">User.where(is_admin: true).collect &:email</span>
+irb(main):002:0> <span class="userinput">Thread.current[:user].update_attributes is_admin: true, is_active: true</span>
+irb(main):003:0> <span class="userinput">User.where(is_admin: true).collect &:email</span>
=> ["root", "<b>your_address@example.com</b>"]
</code></pre></notextile>
projects / arvados.git / blobdiff