echo >&2 " controller"
echo >&2 " dispatcher"
echo >&2 " keepproxy"
+ echo >&2 " keepbalance"
echo >&2 " keepstore"
echo >&2 " keepweb"
echo >&2 " shell"
echo >&2 " -h, --help Display this help and exit"
echo >&2 " --dump-config <dest_dir> Dumps the pillars and states to a directory"
echo >&2 " This parameter does not perform any installation at all. It's"
- echo >&2 " intended to give you a parsed sot of configuration files so"
+ echo >&2 " intended to give you a parsed set of configuration files so"
echo >&2 " you can inspect them or use them in you Saltstack infrastructure."
echo >&2 " It"
echo >&2 " - parses the pillar and states templates,"
echo >&2 " - downloads the helper formulas with their desired versions,"
echo >&2 " - prepares the 'top.sls' files both for pillars and states"
- echo >&2 " for the selected role/s"
+ echo >&2 " for the selected role(s)"
echo >&2 " - writes the resulting files into <dest_dir>"
echo >&2 " -v, --vagrant Run in vagrant and use the /vagrant shared dir"
echo >&2 " --development Run in dev mode, using snakeoil certs"
for i in ${2//,/ }
do
# Verify the role exists
- if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepproxy,shell,workbench,dispatcher" == *"$i"* ]]; then
+ if [[ ! "database,api,controller,keepstore,websocket,keepweb,workbench2,webshell,keepbalance,keepproxy,shell,workbench,dispatcher" == *"$i"* ]]; then
echo "The role '${i}' is not a valid role"
usage
exit 1
CONTROLLER_EXT_SSL_PORT=443
TESTS_DIR="tests"
+NGINX_INSTALL_SOURCE="install_from_repo"
+
CLUSTER=""
DOMAIN=""
SSL_MODE="self-signed"
USE_LETSENCRYPT_ROUTE53="no"
-CUSTOM_CERTS_DIR="${SCRIPT_DIR}/certs"
+CUSTOM_CERTS_DIR="${SCRIPT_DIR}/local_config_dir/certs"
## These are ARVADOS-related parameters
# For a stable release, change RELEASE "production" and VERSION to the
# release.
# The "local.params.example.*" files already set "RELEASE=production"
# to deploy production-ready packages
-RELEASE="development"
-VERSION="latest"
+RELEASE="production"
+VERSION="2.4.1-1"
# These are arvados-formula-related parameters
# An arvados-formula tag. For a stable release, this should be a
# BRANCH="main"
# Other formula versions we depend on
-POSTGRES_TAG="v0.43.0"
-NGINX_TAG="v2.8.0"
-DOCKER_TAG="v2.0.7"
+POSTGRES_TAG="v0.44.0"
+NGINX_TAG="v2.8.1"
+DOCKER_TAG="v2.4.2"
LOCALE_TAG="v0.3.4"
LETSENCRYPT_TAG="v2.1.0"
arguments ${@}
+declare -A NODES
+
if [ -s ${CONFIG_FILE} ]; then
source ${CONFIG_FILE}
else
exit 1
fi
-if grep -q 'fixme_or_this_wont_work' ${CONFIG_FILE} ; then
+if grep -rni 'fixme' ${CONFIG_FILE} ${CONFIG_DIR} ; then
echo >&2 "The config file ${CONFIG_FILE} has some parameters that need to be modified."
echo >&2 "Please, fix them and re-run the provision script."
exit 1
fi
if ! grep -qE '^[[:alnum:]]{5}$' <<<${CLUSTER} ; then
- echo >&2 "ERROR: <CLUSTER> must be exactly 5 alphanumeric characters long"
+ echo >&2 "ERROR: <CLUSTER> must be exactly 5 lowercase alphanumeric characters long"
echo >&2 "Fix the cluster name in the 'local.params' file and re-run the provision script"
exit 1
fi
# Make sure that the value configured as IP_INT is a real IP on the system.
# If we don't error out early here when there is a mismatch, the formula will
# fail with hard to interpret nginx errors later on.
- ip addr list |grep -q " ${IP_INT}/"
+ ip addr list |grep "${IP_INT}/" >/dev/null
if [[ $? -ne 0 ]]; then
echo "Unable to find the IP_INT address '${IP_INT}' on the system, please correct the value in local.params. Exiting..."
exit 1
case ${OS_ID} in
"centos")
echo "WARNING! Disabling SELinux, see https://dev.arvados.org/issues/18019"
- sed -i 's/SELINUX=enforcing/SELINUX=permissive' /etc/sysconfig/selinux
+ sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux
setenforce permissive
yum install -y curl git jq
;;
"debian"|"ubuntu")
- DEBIAN_FRONTEND=noninteractive apt update
+ # Wait 2 minutes for any apt locks to clear
+ # This option is supported from apt 1.9.1 and ignored in older apt versions.
+ # Cf. https://blog.sinjakli.co.uk/2021/10/25/waiting-for-apt-locks-without-the-hacky-bash-scripts/
+ DEBIAN_FRONTEND=noninteractive apt -o DPkg::Lock::Timeout=120 update
DEBIAN_FRONTEND=noninteractive apt install -y curl git jq
;;
esac
"${f}" > "${P_DIR}"/$(basename "${f}")
done
-if [ "x${TEST}" = "xyes" ] && [ ! -d "${SOURCE_TESTS_DIR}" ]; then
- echo "You requested to run tests, but ${SOURCE_TESTS_DIR} does not exist or is not a directory. Exiting."
- exit 1
-fi
-mkdir -p ${T_DIR}
-# Replace cluster and domain name in the test files
-for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
- FILTERS="s#__CLUSTER__#${CLUSTER}#g;
- s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
- s#__DOMAIN__#${DOMAIN}#g;
- s#__IP_INT__#${IP_INT}#g;
- s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
- s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
- s#__INITIAL_USER__#${INITIAL_USER}#g;
- s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
- s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
- if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
- FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
- $FILTERS"
+if [ ! -d "${SOURCE_TESTS_DIR}" ]; then
+ echo "WARNING: The tests directory was not copied to \"${SOURCE_TESTS_DIR}\"."
+ if [ "x${TEST}" = "xyes" ]; then
+ echo "WARNING: Disabling tests for this installation."
fi
- sed "$FILTERS" \
- "${f}" > ${T_DIR}/$(basename "${f}")
-done
-chmod 755 ${T_DIR}/run-test.sh
+ TEST="no"
+else
+ mkdir -p ${T_DIR}
+ # Replace cluster and domain name in the test files
+ for f in $(ls "${SOURCE_TESTS_DIR}"/*); do
+ FILTERS="s#__CLUSTER__#${CLUSTER}#g;
+ s#__CONTROLLER_EXT_SSL_PORT__#${CONTROLLER_EXT_SSL_PORT}#g;
+ s#__DOMAIN__#${DOMAIN}#g;
+ s#__IP_INT__#${IP_INT}#g;
+ s#__INITIAL_USER_EMAIL__#${INITIAL_USER_EMAIL}#g;
+ s#__INITIAL_USER_PASSWORD__#${INITIAL_USER_PASSWORD}#g
+ s#__INITIAL_USER__#${INITIAL_USER}#g;
+ s#__DATABASE_PASSWORD__#${DATABASE_PASSWORD}#g;
+ s#__SYSTEM_ROOT_TOKEN__#${SYSTEM_ROOT_TOKEN}#g"
+ if [ "$USE_SINGLE_HOSTNAME" = "yes" ]; then
+ FILTERS="s#__CLUSTER__.__DOMAIN__#${HOSTNAME_EXT}#g;
+ $FILTERS"
+ fi
+ sed "$FILTERS" \
+ "${f}" > ${T_DIR}/$(basename "${f}")
+ done
+ chmod 755 ${T_DIR}/run-test.sh
+fi
# Replace helper state files that differ from the formula's examples
if [ -d "${SOURCE_STATES_DIR}" ]; then
s#__WORKBENCH2_INT_IP__#${WORKBENCH2_INT_IP}#g;
s#__DATABASE_INT_IP__#${DATABASE_INT_IP}#g;
s#__WEBSHELL_EXT_SSL_PORT__#${WEBSHELL_EXT_SSL_PORT}#g;
+ s#__SHELL_INT_IP__#${SHELL_INT_IP}#g;
s#__WEBSOCKET_EXT_SSL_PORT__#${WEBSOCKET_EXT_SSL_PORT}#g;
s#__WORKBENCH1_EXT_SSL_PORT__#${WORKBENCH1_EXT_SSL_PORT}#g;
s#__WORKBENCH2_EXT_SSL_PORT__#${WORKBENCH2_EXT_SSL_PORT}#g;
# Same when using self-signed certificates.
SKIP_SNAKE_OIL="dont_add_snakeoil_certs"
fi
- for f in $(ls "${F_DIR}"/extra/extra/*.sls | grep -v ${SKIP_SNAKE_OIL}); do
+ for f in $(ls "${F_DIR}"/extra/extra/*.sls | egrep -v "${SKIP_SNAKE_OIL}|shell_"); do
echo " - extra.$(basename ${f} | sed 's/.sls$//g')" >> ${S_DIR}/top.sls
done
# Use byo or self-signed certificates
fi
grep -q "letsencrypt" ${S_DIR}/top.sls || echo " - letsencrypt" >> ${S_DIR}/top.sls
else
- # Use custom certs, as both bring-your-own and self-signed are copied using this state
- # Copy certs to formula extra/files
- # In dev mode, the files will be created and put in the destination directory by the
- # snakeoil_certs.sls state file
mkdir -p /srv/salt/certs
- cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
- # We add the custom_certs state
- grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ if [ "${SSL_MODE}" = "bring-your-own" ]; then
+ # Copy certs to formula extra/files
+ cp -rv ${CUSTOM_CERTS_DIR}/* /srv/salt/certs/
+ # We add the custom_certs state
+ grep -q "custom_certs" ${S_DIR}/top.sls || echo " - extra.custom_certs" >> ${S_DIR}/top.sls
+ fi
+ # In self-signed mode, the certificate files will be created and put in the
+ # destination directory by the snakeoil_certs.sls state file
fi
echo " - postgres" >> ${S_DIR}/top.sls
echo " - docker.software" >> ${S_DIR}/top.sls
echo " - arvados" >> ${S_DIR}/top.sls
+ echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+ echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
+ echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
# Pillars
echo " - docker" >> ${P_DIR}/top.sls
echo " - nginx_workbench_configuration" >> ${P_DIR}/top.sls
echo " - postgresql" >> ${P_DIR}/top.sls
+ # We need to tweak the Nginx's pillar depending whether we want plan nginx or nginx+passenger
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
+
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
fi
grep -q "letsencrypt" ${P_DIR}/top.sls || echo " - letsencrypt" >> ${P_DIR}/top.sls
- # As the pillar differ whether we use LE or custom certs, we need to do a final edition on them
- for c in controller websocket workbench workbench2 webshell keepweb keepproxy; do
+ hosts=("controller" "websocket" "workbench" "workbench2" "webshell" "keepproxy")
+ if [ ${USE_SINGLE_HOSTNAME} = "no" ]; then
+ hosts+=("download" "collections")
+ else
+ hosts+=("keepweb")
+ fi
+
+ for c in "${hosts[@]}"; do
+ # Are we in a single-host-single-hostname env?
if [ "${USE_SINGLE_HOSTNAME}" = "yes" ]; then
# Are we in a single-host-single-hostname env?
CERT_NAME=${HOSTNAME_EXT}
else
- # We are in a single-host-multiple-hostnames env
+ # We are in a multiple-hostnames env
CERT_NAME=${c}.${CLUSTER}.${DOMAIN}
fi
+ # As the pillar differs whether we use LE or custom certs, we need to do a final edition on them
sed -i "s/__CERT_REQUIRES__/cmd: create-initial-cert-${CERT_NAME}*/g;
s#__CERT_PEM__#/etc/letsencrypt/live/${CERT_NAME}/fullchain.pem#g;
s#__CERT_KEY__#/etc/letsencrypt/live/${CERT_NAME}/privkey.pem#g" \
# States
# FIXME: https://dev.arvados.org/issues/17352
grep -q "postgres.client" ${S_DIR}/top.sls || echo " - postgres.client" >> ${S_DIR}/top.sls
- grep -q "nginx.passenger" ${S_DIR}/top.sls || echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ if grep -q " - nginx.*$" ${S_DIR}/top.sls; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
+ else
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ fi
+ echo " - extra.passenger_rvm" >> ${S_DIR}/top.sls
### If we don't install and run LE before arvados-api-server, it fails and breaks everything
### after it. So we add this here as we are, after all, sharing the host for api and controller
- # Currently, only available on config_examples/multi_host/aws
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
grep -q "postgresql" ${P_DIR}/top.sls || echo " - postgresql" >> ${P_DIR}/top.sls
grep -q "nginx_passenger" ${P_DIR}/top.sls || echo " - nginx_passenger" >> ${P_DIR}/top.sls
grep -q "nginx_${R}_configuration" ${P_DIR}/top.sls || echo " - nginx_${R}_configuration" >> ${P_DIR}/top.sls
+
+ # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
;;
"controller" | "websocket" | "workbench" | "workbench2" | "webshell" | "keepweb" | "keepproxy")
# States
- grep -q "nginx.passenger" ${S_DIR}/top.sls || echo " - nginx.passenger" >> ${S_DIR}/top.sls
- # Currently, only available on config_examples/multi_host/aws
+ if [ "${R}" = "workbench" ]; then
+ NGINX_INSTALL_SOURCE="install_from_phusionpassenger"
+ if grep -q " - nginx$" ${S_DIR}/top.sls; then
+ sed -i s/"^ - nginx.*$"/" - nginx.passenger"/g ${S_DIR}/top.sls
+ else
+ echo " - nginx.passenger" >> ${S_DIR}/top.sls
+ fi
+ else
+ grep -q "nginx" ${S_DIR}/top.sls || echo " - nginx" >> ${S_DIR}/top.sls
+ fi
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "x${USE_LETSENCRYPT_ROUTE53}" = "xyes" ]; then
grep -q "aws_credentials" ${S_DIR}/top.sls || echo " - aws_credentials" >> ${S_DIR}/top.sls
grep -q "nginx_collections_configuration" ${P_DIR}/top.sls || echo " - nginx_collections_configuration" >> ${P_DIR}/top.sls
fi
- # Currently, only available on config_examples/multi_host/aws
if [ "${SSL_MODE}" = "lets-encrypt" ]; then
if [ "${USE_LETSENCRYPT_ROUTE53}" = "yes" ]; then
grep -q "aws_credentials" ${P_DIR}/top.sls || echo " - aws_credentials" >> ${P_DIR}/top.sls
grep -q ${R} ${P_DIR}/extra_custom_certs.sls || echo " - ${R}" >> ${P_DIR}/extra_custom_certs.sls
fi
fi
+ # We need to tweak the Nginx's pillar depending whether we want plain nginx or nginx+passenger
+ sed -i "s/__NGINX_INSTALL_SOURCE__/${NGINX_INSTALL_SOURCE}/g" ${P_DIR}/nginx_passenger.sls
;;
"shell")
# States
+ echo " - extra.shell_sudo_passwordless" >> ${S_DIR}/top.sls
+ echo " - extra.shell_cron_add_login_sync" >> ${S_DIR}/top.sls
grep -q "docker" ${S_DIR}/top.sls || echo " - docker.software" >> ${S_DIR}/top.sls
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
# Pillars
grep -q "docker" ${P_DIR}/top.sls || echo " - docker" >> ${P_DIR}/top.sls
;;
- "dispatcher")
- # States
- grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
- # Pillars
- # ATM, no specific pillar needed
- ;;
- "keepstore")
+ "dispatcher" | "keepbalance" | "keepstore")
# States
grep -q "arvados.${R}" ${S_DIR}/top.sls || echo " - arvados.${R}" >> ${S_DIR}/top.sls
# Pillars
exit 0
fi
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ -e /root/.psqlrc ]; then
- if ! ( grep 'pset pager off' /root/.psqlrc ); then
- RESTORE_PSQL="yes"
- cp /root/.psqlrc /root/.psqlrc.provision.backup
- fi
-else
- DELETE_PSQL="yes"
-fi
-
-echo '\pset pager off' >> /root/.psqlrc
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
-
# Now run the install
salt-call --local state.apply -l ${LOG_LEVEL}
sed -i 's/^manage_etc_hosts: true/#manage_etc_hosts: true/g' /etc/cloud/cloud.cfg.d/*
fi
-# FIXME! #16992 Temporary fix for psql call in arvados-api-server
-if [ "x${DELETE_PSQL}" = "xyes" ]; then
- echo "Removing .psql file"
- rm /root/.psqlrc
-fi
-
-if [ "x${RESTORE_PSQL}" = "xyes" ]; then
- echo "Restoring .psql file"
- mv -v /root/.psqlrc.provision.backup /root/.psqlrc
-fi
-# END FIXME! #16992 Temporary fix for psql call in arvados-api-server
-
# Leave a copy of the Arvados CA so the user can copy it where it's required
if [ "$DEV_MODE" = "yes" ]; then
echo "Copying the Arvados CA certificate to the installer dir, so you can import it"