import gflags
import httplib
import httplib2
import os
import pprint
import sys
import types
import subprocess
import json
import UserDict
import re
import hashlib
import string
import bz2
import zlib
import fcntl
import time
import threading
import collections

from keep import *
import config
import errors

LOCATOR = 0
BLOCKSIZE = 1
OFFSET = 2
SEGMENTSIZE = 3

def locators_and_ranges(data_locators, range_start, range_size, debug=False):
    '''
    Get blocks that are covered by the range
    data_locators: list of [locator, block_size, block_start], assumes that blocks are in order and contigous
    range_start: start of range
    range_size: size of range
    returns list of [block locator, blocksize, segment offset, segment size] that satisfies the range
    '''
    if range_size == 0:
        return []
    resp = []
    range_start = long(range_start)
    range_size = long(range_size)
    range_end = range_start + range_size
    block_start = 0L

    # range_start/block_start is the inclusive lower bound
    # range_end/block_end is the exclusive upper bound

    hi = len(data_locators)
    lo = 0
    i = int((hi + lo) / 2)
    block_size = data_locators[i][BLOCKSIZE]
    block_start = data_locators[i][OFFSET]
    block_end = block_start + block_size
    if debug: print '---'

    # perform a binary search for the first block
    # assumes that all of the blocks are contigious, so range_start is guaranteed
    # to either fall into the range of a block or be outside the block range entirely
    while not (range_start >= block_start and range_start < block_end):
        if lo == i:
            # must be out of range, fail
            return []
        if range_start > block_start:
            lo = i
        else:
            hi = i
        i = int((hi + lo) / 2)
        if debug: print lo, i, hi
        block_size = data_locators[i][BLOCKSIZE]
        block_start = data_locators[i][OFFSET]
        block_end = block_start + block_size

    while i < len(data_locators):
        locator, block_size, block_start = data_locators[i]
        block_end = block_start + block_size
        if debug:
            print locator, "range_start", range_start, "block_start", block_start, "range_end", range_end, "block_end", block_end
        if range_end <= block_start:
            # range ends before this block starts, so don't look at any more locators
            break

        #if range_start >= block_end:
            # range starts after this block ends, so go to next block
            # we should always start at the first block due to the binary above, so this test is redundant
            #next

        if range_start >= block_start and range_end <= block_end:
            # range starts and ends in this block
            resp.append([locator, block_size, range_start - block_start, range_size])
        elif range_start >= block_start and range_end > block_end:
            # range starts in this block
            resp.append([locator, block_size, range_start - block_start, block_end - range_start])
        elif range_start < block_start and range_end > block_end:
            # range starts in a previous block and extends to further blocks
            resp.append([locator, block_size, 0L, block_size])
        elif range_start < block_start and range_end <= block_end:
            # range starts in a previous block and ends in this block
            resp.append([locator, block_size, 0L, range_end - block_start])
        block_start = block_end
        i += 1
    return resp


class StreamFileReader(object):
    def __init__(self, stream, segments, name):
        self._stream = stream
        self.segments = segments
        self._name = name
        self._filepos = 0L

    def name(self):
        return self._name

    def decompressed_name(self):
        return re.sub('\.(bz2|gz)$', '', self._name)

    def stream_name(self):
        return self._stream.name()

    def seek(self, pos):
        self._filepos = min(max(pos, 0L), self.size())

    def tell(self):
        return self._filepos

    def size(self):
        n = self.segments[-1]
        return n[OFFSET] + n[BLOCKSIZE]

    def read(self, size):
        """Read up to 'size' bytes from the stream, starting at the current file position"""
        if size == 0:
            return ''

        data = ''
        available_chunks = locators_and_ranges(self.segments, self._filepos, size)
        if available_chunks:
            locator, blocksize, segmentoffset, segmentsize = available_chunks[0]
            data = self._stream.readfrom(locator+segmentoffset, segmentsize)

        self._filepos += len(data)
        return data

    def readfrom(self, start, size):
        """Read up to 'size' bytes from the stream, starting at 'start'"""
        if size == 0:
            return ''

        data = ''
        for locator, blocksize, segmentoffset, segmentsize in locators_and_ranges(self.segments, start, size):
            data += self._stream.readfrom(locator+segmentoffset, segmentsize)
        return data

    def readall(self, size=2**20):
        while True:
            data = self.read(size)
            if data == '':
                break
            yield data

    def decompress(self, decompress, size):
        for segment in self.readall(size):
            data = decompress(segment)
            if data and data != '':
                yield data

    def readall_decompressed(self, size=2**20):
        self.seek(0)
        if re.search('\.bz2$', self._name):
            dc = bz2.BZ2Decompressor()
            return self.decompress(lambda segment: dc.decompress(segment), size)
        elif re.search('\.gz$', self._name):
            dc = zlib.decompressobj(16+zlib.MAX_WBITS)
            return self.decompress(lambda segment: dc.decompress(dc.unconsumed_tail + segment), size)
        else:
            return self.readall(size)

    def readlines(self, decompress=True):
        if decompress:
            datasource = self.readall_decompressed()
        else:
            datasource = self.readall()
        data = ''
        for newdata in datasource:
            data += newdata
            sol = 0
            while True:
                eol = string.find(data, "\n", sol)
                if eol < 0:
                    break
                yield data[sol:eol+1]
                sol = eol+1
            data = data[sol:]
        if data != '':
            yield data

    def as_manifest(self):
        manifest_text = ['.']
        manifest_text.extend([d[LOCATOR] for d in self._stream._data_locators])
        manifest_text.extend(["{}:{}:{}".format(seg[LOCATOR], seg[BLOCKSIZE], self.name().replace(' ', '\\040')) for seg in self.segments])
        return arvados.CollectionReader(' '.join(manifest_text) + '\n').manifest_text()

class StreamReader(object):
    def __init__(self, tokens, keep=None, debug=False, _empty=False):
        self._stream_name = None
        self._data_locators = []
        self._files = collections.OrderedDict()

        if keep is None:
            keep = KeepClient()
        self._keep = keep

        streamoffset = 0L

        # parse stream
        for tok in tokens:
            if debug: print 'tok', tok
            if self._stream_name == None:
                self._stream_name = tok.replace('\\040', ' ')
                continue

            s = re.match(r'^[0-9a-f]{32}\+(\d+)(\+\S+)*$', tok)
            if s:
                blocksize = long(s.group(1))
                self._data_locators.append([tok, blocksize, streamoffset])
                streamoffset += blocksize
                continue

            s = re.search(r'^(\d+):(\d+):(\S+)', tok)
            if s:
                pos = long(s.group(1))
                size = long(s.group(2))
                name = s.group(3).replace('\\040', ' ')
                if name not in self._files:
                    self._files[name] = StreamFileReader(self, [[pos, size, 0]], name)
                else:
                    n = self._files[name]
                    n.segments.append([pos, size, n.size()])
                continue

            raise errors.SyntaxError("Invalid manifest format")

    def name(self):
        return self._stream_name

    def files(self):
        return self._files

    def all_files(self):
        return self._files.values()

    def size(self):
        n = self._data_locators[-1]
        return n[OFFSET] + n[BLOCKSIZE]

    def locators_and_ranges(self, range_start, range_size):
        return locators_and_ranges(self._data_locators, range_start, range_size)

    def readfrom(self, start, size):
        """Read up to 'size' bytes from the stream, starting at 'start'"""
        if size == 0:
            return ''
        data = ''
        for locator, blocksize, segmentoffset, segmentsize in locators_and_ranges(self._data_locators, start, size):
            data += self._keep.get(locator)[segmentoffset:segmentoffset+segmentsize]
        return data

    def manifest_text(self, strip=False):
        manifest_text = [self.name().replace(' ', '\\040')]
        if strip:
            for d in self._data_locators:
                m = re.match(r'^[0-9a-f]{32}\+\d+', d[LOCATOR])
                manifest_text.append(m.group(0))
        else:
            manifest_text.extend([d[LOCATOR] for d in self._data_locators])
        manifest_text.extend([' '.join(["{}:{}:{}".format(seg[LOCATOR], seg[BLOCKSIZE], f.name().replace(' ', '\\040'))
                                        for seg in f.segments])
                              for f in self._files.values()])
        return ' '.join(manifest_text) + '\n'