--- layout: default navsection: installguide title: Install the Single Sign On (SSO) server ... {% comment %} Copyright (C) The Arvados Authors. All rights reserved. SPDX-License-Identifier: CC-BY-SA-3.0 {% endcomment %} h2(#dependencies). Install prerequisites The Arvados package repository includes an SSO server package that can help automate much of the deployment. h3(#install_ruby_and_bundler). Install Ruby and Bundler {% include 'install_ruby_and_bundler' %} h3(#install_web_server). Set up a Web server For best performance, we recommend you use Nginx as your Web server frontend with a Passenger backend to serve the SSO server. The Passenger team provides "Nginx + Passenger installation instructions":https://www.phusionpassenger.com/library/walkthroughs/deploy/ruby/ownserver/nginx/oss/install_passenger_main.html. Follow the instructions until you see the section that says you are ready to deploy your Ruby application on the production server. h2(#install). Install the SSO server On a Debian-based system, install the following package:
~$ sudo apt-get install arvados-sso-server
On a Red Hat-based system, install the following package:
~$ sudo yum install arvados-sso-server
h2(#configure). Configure the SSO server The package has installed three configuration files in @/etc/arvados/sso@:
/etc/arvados/sso/application.yml
/etc/arvados/sso/database.yml
/etc/arvados/sso/production.rb
The SSO server runs from the @/var/www/arvados-sso/current/@ directory. The files @/var/www/arvados-sso/current/config/application.yml@, @/var/www/arvados-sso/current/config/database.yml@ and @/var/www/arvados-sso/current/config/environments/production.rb@ are symlinked to the configuration files in @/etc/arvados/sso/@. The SSO server reads the @config/application.yml@ file, as well as the @config/application.defaults.yml@ file. Values in @config/application.yml@ take precedence over the defaults that are defined in @config/application.defaults.yml@. The @config/application.yml.example@ file is not read by the SSO server and is provided for installation convenience only. Consult @config/application.default.yml@ for a full list of configuration options. Local configuration goes in @/etc/arvados/sso/application.yml@, do not edit @config/application.default.yml@. h3(#uuid_prefix). uuid_prefix Generate a uuid prefix for the single sign on service. This prefix is used to identify user records as originating from this site. It must be exactly 5 lowercase ASCII letters and/or digits. You may use the following snippet to generate a uuid prefix:
~$ ruby -e 'puts "#{rand(2**64).to_s(36)[0,5]}"'
abcde
Edit @/etc/arvados/sso/application.yml@ and set @uuid_prefix@ in the "common" section. h3(#secret_token). secret_token Generate a new secret token for signing cookies:
~$ ruby -e 'puts rand(2**400).to_s(36)'
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Edit @/etc/arvados/sso/application.yml@ and set @secret_token@ in the "common" section. There are other configuration options in @/etc/arvados/sso/application.yml@. See the "Authentication methods":install-sso.html#authentication_methods section below for more details. h2(#database). Set up the database Configure the SSO server to connect to your database by updating @/etc/arvados/sso/database.yml@. Replace the @xxxxxxxx@ database password placeholder with the "password you generated during database setup":install-postgresql.html#sso. Be sure to update the @production@ section.
~$ editor /etc/arvados/sso/database.yml
h2(#reconfigure_package). Reconfigure the package {% assign railspkg = "arvados-sso-server" %} {% include 'install_rails_reconfigure' %} h2(#client). Create arvados-server client {% assign railshost = "" %} {% assign railsdir = "/var/www/arvados-sso/current" %} Use @rails console@ to create a @Client@ record that will be used by the Arvados API server. {% include 'install_rails_command' %} Enter the following commands at the console. The values that appear after you assign @app_id@ and @app_secret@ correspond to the values for @sso_app_id@ and @sso_app_secret@, respectively, in the "API server's SSO settings":install-api-server.html#omniauth.
:001 > c = Client.new
:002 > c.name = "joshid"
:003 > c.app_id = "arvados-server"
:004 > c.app_secret = rand(2**400).to_s(36)
=> "save this string for your API server's sso_app_secret"
:005 > c.save!
:006 > quit
h2(#configure_web_server). Configure your web server Edit the http section of your Nginx configuration to run the Passenger server and act as a frontend for it. You might add a block like the following, adding SSL and logging parameters to taste:
server {
  listen 127.0.0.1:8900;
  server_name localhost-sso;

  root   /var/www/arvados-sso/current/public;
  index  index.html;

  passenger_enabled on;
  # If you're not using RVM, comment out the line below.
  passenger_ruby /usr/local/rvm/wrappers/default/ruby;
}

upstream sso {
  server     127.0.0.1:8900  fail_timeout=10s;
}

proxy_http_version 1.1;

server {
  listen       [your public IP address]:443 ssl;
  server_name  auth.your.domain;

  ssl on;
  ssl_certificate     /YOUR/PATH/TO/cert.pem;
  ssl_certificate_key /YOUR/PATH/TO/cert.key;

  index  index.html;

  location / {
    proxy_pass            http://sso;
    proxy_redirect        off;
    proxy_connect_timeout 90s;
    proxy_read_timeout    300s;

    proxy_set_header      X-Forwarded-Proto https;
    proxy_set_header      Host $http_host;
    proxy_set_header      X-Real-IP $remote_addr;
    proxy_set_header      X-Forwarded-For $proxy_add_x_forwarded_for;
  }
}
Finally, restart Nginx and your Arvados SSO server should be up and running. You can verify that by visiting the URL you configured your Nginx web server to listen on in the server section above (port 443). Read on if you want to configure your Arvados SSO server to use a different authentication backend. h2(#authentication_methods). Authentication methods Authentication methods are configured in @application.yml@. Currently three authentication methods are supported: local accounts, LDAP, and Google+. If neither Google+ nor LDAP are enabled, the SSO server defaults to local user accounts. Only one authentication mechanism should be in use at a time. h3(#local_accounts). Local account authentication There are two configuration options for local accounts:
  # If true, allow new creation of new accounts in the SSO server's internal
  # user database.
  allow_account_registration: false

  # If true, send an email confirmation before activating new accounts in the
  # SSO server's internal user database (otherwise users are activated immediately.)
  require_email_confirmation: false
For more information about configuring backend support for sending email (required to send email confirmations) see "Configuring Action Mailer":http://guides.rubyonrails.org/configuring.html#configuring-action-mailer If @allow_account_registration@ is false, you may manually create local accounts on the SSO server from the Rails console. {% include 'install_rails_command' %} Enter the following commands at the console.
:001 > user = User.new(:email => "test@example.com")
:002 > user.password = "passw0rd"
:003 > user.save!
:004 > quit
h3(#ldap). LDAP authentication The following options are available to configure LDAP authentication. Note that you must preserve the indentation of the fields listed under @use_ldap@.
  use_ldap:
    title: Example LDAP
    host: ldap.example.com
    port: 636
    method: ssl
    base: "ou=Users, dc=example, dc=com"
    uid: uid
    email_domain: example.com
    #bind_dn: "some_user"
    #password: "some_password"
table(table). |_. Option|_. Description| |title |Title displayed to the user on the login page| |host |LDAP server hostname| |port |LDAP server port| |method|One of "plain", "ssl", "tls"| |base |Directory lookup base| |uid |User id field used for directory lookup| |email_domain|Strip off specified email domain from login and perform lookup on bare username| |bind_dn|If required by server, username to log with in before performing directory lookup| |password|If required by server, password to log with before performing directory lookup| h3(#google). Google+ authentication In order to use Google+ authentication, you must use the Google Developers Console to create a set of client credentials. # Go to the Google Developers Console and select or create a project; this will take you to the project page. # On the sidebar, click on *APIs & auth* then select *APIs*. ## Search for *Contacts API* and click on *Enable API*. ## Search for *Google+ API* and click on *Enable API*. # On the sidebar, click on *Credentials*; under *OAuth* click on *Create new Client ID* to bring up the *Create Client ID* dialog box. # Under *Application type* select *Web application*. # If the authorization origins are not displayed, clicking on *Create Client ID* will take you to *Consent screen* settings. ## On consent screen settings, enter the appropriate details and click on *Save*. ## This will return you to the *Create Client ID* dialog box. # You must set the authorization origins. Edit @sso.your-site.com@ to the appropriate hostname that you will use to access the SSO service: ## JavaScript origin should be @https://sso.your-site.com/@ ## Redirect URI should be @https://sso.your-site.com/users/auth/google_oauth2/callback@ # Copy the values of *Client ID* and *Client secret* from the Google Developers Console into the Google section of @config/application.yml@, like this:
  # Google API tokens required for OAuth2 login.
  google_oauth2_client_id: "---YOUR---CLIENT---ID---HERE--"-
  google_oauth2_client_secret: "---YOUR---CLIENT---SECRET---HERE--"-