18791: update documentation, fix single host/single hostname installer

[arvados.git] / doc / install / salt-single-host.html.textile.liquid

---
layout: default
navsection: installguide
title: Single host Arvados
...
{% comment %}
Copyright (C) The Arvados Authors. All rights reserved.

SPDX-License-Identifier: CC-BY-SA-3.0
{% endcomment %}

# "Limitations of the single host install":#limitations
# "Prerequisites":#prerequisites
# "Single host install using the provision.sh script":#single_host
# "Choose the desired configuration":#choose_configuration
## "Single host / single hostname":#single_host_single_hostnames
## "Single host / multiple hostnames (Alternative configuration)":#single_host_multiple_hostnames
## "Further customization of the installation (modifying the salt pillars and states)":#further_customization
# "Run the provision.sh script":#run_provision_script
# "Final configuration steps":#final_steps
## "Install the CA root certificate (required in both alternatives)":#ca_root_certificate
## "DNS configuration (single host / multiple hostnames)":#single_host_multiple_hostnames_dns_configuration
# "Initial user and login":#initial_user
# "Test the installed cluster running a simple workflow":#test_install
# "After the installation":#post_install

h2(#limitations). Limitations of the single host install

<b>NOTE: The single host installation is a good choice when evaluating Arvados, but it is not recommended for production use.</b>

Using the default configuration, this installation method has a number of limitations:

* all services run on the same machine, and they will compete for resources.
* it uses the local machine disk for Keep storage (under the @/tmp@ directory).
* it installs the @crunch-dispatch-local@ dispatcher, which can run just one concurrent CWL job. This job will be executed on the machine that runs all the Arvados services. Most workflows require at least two concurrent CWL jobs, one for the workflow runner, and one for the payload.

It is possible to start with the single host installation method and modify the Arvados configuration file later to address these limitations. E.g. switch to a "different storage volume setup":{{site.baseurl}}/install/configure-s3-object-storage.html for Keep, and switch to "the cloud dispatcher":{{site.baseurl}}/install/crunch2-cloud/install-dispatch-cloud.html to provision compute resources dynamically.

h2(#prerequisites). Prerequisites and planning

Arvados requires SSL for (almost) all network traffic. This installation method supports the following options for the required SSL certificate(s): @self-signed@ and @bring your own certificates@.

Prerequisites

* git
* a dedicated (virtual) machine for your Arvados server with at least 2 cores and 8 GiB of RAM, running a "supported Arvados distribution":{{site.baseurl}}/install/install-manual-prerequisites.html#supportedlinux
* ports 9443-9445, 11002, 14202, 18002, 35101 need to be reachable from your client (configurable, see below)
* at least one DNS hostname that resolves to the IP address of your Arvados server
* one or more SSL certificates matching the hostname(s) in use (only when using @bring your own certificates@)

h2(#single_host). Single host install using the provision.sh script

{% include 'branchname' %}

This procedure will install all the main Arvados components to get you up and running in a single host. The whole installation procedure takes somewhere between 15 to 60 minutes, depending on the host resources and its network bandwidth. As a reference, on a virtual machine with 1 core and 1 GB RAM, it takes ~25 minutes to do the initial install.

This is a package-based installation method, however the installation script is currently distributed in source form via @git@:

<notextile>
<pre><code>git clone https://git.arvados.org/arvados.git
git checkout {{ branchname }}
cd arvados/tools/salt-install
</code></pre>
</notextile>

The @provision.sh@ script will help you deploy Arvados by preparing your environment to be able to run the installer, then running it. The actual installer is located at "arvados-formula":https://git.arvados.org/arvados-formula.git/tree/refs/heads/{{ branchname }} and will be cloned during the running of the @provision.sh@ script.  The installer is built using "Saltstack":https://saltproject.io/ and @provision.sh@ performs the install using master-less mode.

After setting up a few variables in a config file (next step), you'll be ready to run it and get Arvados deployed.

h2(#choose_configuration). Choose the desired configuration

For documentation's sake, we will use the cluster name <i>arva2</i> and the domain <i>arv.local</i>. If you don't change them as required in the next steps, installation won't proceed.

Arvados' single host installation can be done in two fashions:

* Using a single hostname, assigning <i>a different port (other than 443) for each user-facing service</i>: This choice is easier to setup, but the user will need to know the port/s for the different services she wants to connect to.
* Using multiple hostnames on the same IP: this setup involves a few extra steps but each service will have a meaningful hostname so it will make easier to access them later.

Once you decide which of these choices you prefer, copy one the two example configuration files and directory, and edit them to suit your needs.

h3(#single_host_single_hostnames). Single host / single hostname
<notextile>
<pre><code>cp local.params.example.single_host_single_hostname local.params
cp -r config_examples/single_host/single_hostname local_config_dir
</code></pre>
</notextile>

Edit the variables in the <i>local.params</i> file. Pay attention to the <b>*_PORT, *_TOKEN</b> and <b>*KEY</b> variables.

The <i>single_host</i> examples use self-signed SSL certificates, which are deployed using the same mechanism used to deploy custom certificates.

h3(#single_host_multiple_hostnames). Single host / multiple hostnames (Alternative configuration)
<notextile>
<pre><code>cp local.params.example.single_host_multiple_hostnames local.params
cp -r config_examples/single_host/multiple_hostnames local_config_dir
</code></pre>
</notextile>

Edit the variables in the <i>local.params</i> file.

{% include 'install_custom_certificates' %}

h3(#further_customization). Further customization of the installation (modifying the salt pillars and states)

If you want or need further customization, you can edit the Saltstack pillars and states files. Pay particular attention to the <i>pillars/arvados.sls</i> one. Any extra <i>state</i> file you add under <i>local_config_dir/states</i> will be added to the salt run and applied to the host.

h2(#run_provision_script). Run the provision.sh script

When you finished customizing the configuration, you are ready to copy the files to the host (if needed) and run the @provision.sh@ script:

<notextile>
<pre><code>scp -r provision.sh local* tests user@host:
# if you are using bring-your-own certificates, make sure to copy those too:
# scp -r certs user@host:
ssh user@host sudo ./provision.sh
</code></pre>
</notextile>

or, if you saved the @local.params@ in another directory or with some other name

<notextile>
<pre><code>scp -r provision.sh local* tests user@host:
ssh user@host sudo ./provision.sh -c /path/to/your/local.params.file
</code></pre>
</notextile>

and wait for it to finish.

If everything goes OK, you'll get some final lines stating something like:

<notextile>
<pre><code>arvados: Succeeded: 109 (changed=9)
arvados: Failed:      0
</code></pre>
</notextile>

h2(#final_steps). Final configuration steps

Once the deployment went OK, you'll need to perform a few extra steps in your local browser/host to access the cluster.

h3(#ca_root_certificate). Install the CA root certificate (SSL_MODE=self-signed only)

Arvados uses SSL to encrypt communications. Its UI uses AJAX which will silently fail if the certificate is not valid or signed by an unknown Certification Authority.

For this reason, the @arvados-formula@ has a helper state to create a root certificate to authorize Arvados services. The @provision.sh@ script will leave a copy of the generated CA's certificate (@arvados-snakeoil-ca.pem@) in the script's directory so you can add it to your workstation.

Installing the root certificate into your web browser will prevent security errors when accessing Arvados services with your web browser.

# Go to the certificate manager in your browser.
#* In Chrome, this can be found under "Settings &rarr; Advanced &rarr; Manage Certificates" or by entering @chrome://settings/certificates@ in the URL bar.
#* In Firefox, this can be found under "Preferences &rarr; Privacy & Security" or entering @about:preferences#privacy@ in the URL bar and then choosing "View Certificates...".
# Select the "Authorities" tab, then press the "Import" button.  Choose @arvados-snakeoil-ca.pem@

The certificate will be added under the "Arvados Formula".

To access your Arvados instance using command line clients (such as arv-get and arv-put) without security errors, install the certificate into the OS certificate storage.

* On Debian/Ubuntu:

<notextile>
<pre><code>cp arvados-root-cert.pem /usr/local/share/ca-certificates/
/usr/sbin/update-ca-certificates
</code></pre>
</notextile>

* On CentOS:

<notextile>
<pre><code>cp arvados-root-cert.pem /etc/pki/ca-trust/source/anchors/
/usr/bin/update-ca-trust
</code></pre>
</notextile>

h3(#single_host_multiple_hostnames_dns_configuration). DNS configuration (single host / multiple hostnames)

When using multiple hostnames, after the setup is done, you need to set up your DNS to be able to access the cluster.

If you don't have access to the domain's DNS to add the required entries, the simplest way to do it is to edit your @/etc/hosts@ file (as root):

<notextile>
<pre><code>export CLUSTER="arva2"
export DOMAIN="arv.local"
export HOST_IP="127.0.0.2"    # This is valid either if installing in your computer directly
                              # or in a Vagrant VM. If you're installing it on a remote host
                              # just change the IP to match that of the host.
echo "${HOST_IP} api keep keep0 collections download ws workbench workbench2 ${CLUSTER}.${DOMAIN} api.${CLUSTER}.${DOMAIN} keep.${CLUSTER}.${DOMAIN} keep0.${CLUSTER}.${DOMAIN} collections.${CLUSTER}.${DOMAIN} download.${CLUSTER}.${DOMAIN} ws.${CLUSTER}.${DOMAIN} workbench.${CLUSTER}.${DOMAIN} workbench2.${CLUSTER}.${DOMAIN}" >> /etc/hosts
</code></pre>
</notextile>

h2(#initial_user). Initial user and login

At this point you should be able to log into the Arvados cluster. The initial URL will be:

* https://workbench.arva2.arv.local

or, in general, the url format will be:

* https://workbench.@<cluster>.<domain>@

By default, the provision script creates an initial user for testing purposes. This user is configured as administrator of the newly created cluster.

Assuming you didn't change these values in the @local.params@ file, the initial credentials are:

* User: 'admin'
* Password: 'password'
* Email: 'admin@arva2.arv.local'

h2(#test_install). Test the installed cluster running a simple workflow

The @provision.sh@ script saves a simple example test workflow in the @/tmp/cluster_tests@ directory in the node. If you want to run it, just ssh to the node, change to that directory and run:

<notextile>
<pre><code>cd /tmp/cluster_tests
sudo ./run-test.sh
</code></pre>
</notextile>

It will create a test user (by default, the same one as the admin user), upload a small workflow and run it. If everything goes OK, the output should similar to this (some output was shortened for clarity):

<notextile>
<pre><code>Creating Arvados Standard Docker Images project
Arvados project uuid is 'arva2-j7d0g-0prd8cjlk6kfl7y'
{
 ...
 "uuid":"arva2-o0j2j-n4zu4cak5iifq2a",
 "owner_uuid":"arva2-tpzed-000000000000000",
 ...
}
Uploading arvados/jobs' docker image to the project
2.1.1: Pulling from arvados/jobs
8559a31e96f4: Pulling fs layer
...
Status: Downloaded newer image for arvados/jobs:2.1.1
docker.io/arvados/jobs:2.1.1
2020-11-23 21:43:39 arvados.arv_put[32678] INFO: Creating new cache file at /home/vagrant/.cache/arvados/arv-put/c59256eda1829281424c80f588c7cc4d
2020-11-23 21:43:46 arvados.arv_put[32678] INFO: Collection saved as 'Docker image arvados jobs:2.1.1 sha256:0dd50'
arva2-4zz18-1u5pvbld7cvxuy2
Creating initial user ('admin')
Setting up user ('admin')
{
 "items":[
  {
   ...
   "owner_uuid":"arva2-tpzed-000000000000000",
   ...
   "uuid":"arva2-o0j2j-1ownrdne0ok9iox"
  },
  {
   ...
   "owner_uuid":"arva2-tpzed-000000000000000",
   ...
   "uuid":"arva2-o0j2j-1zbeyhcwxc1tvb7"
  },
  {
   ...
   "email":"admin@arva2.arv.local",
   ...
   "owner_uuid":"arva2-tpzed-000000000000000",
   ...
   "username":"admin",
   "uuid":"arva2-tpzed-3wrm93zmzpshrq2",
   ...
  }
 ],
 "kind":"arvados#HashList"
}
Activating user 'admin'
{
 ...
 "email":"admin@arva2.arv.local",
 ...
 "username":"admin",
 "uuid":"arva2-tpzed-3wrm93zmzpshrq2",
 ...
}
Running test CWL workflow
INFO /usr/bin/cwl-runner 2.1.1, arvados-python-client 2.1.1, cwltool 3.0.20200807132242
INFO Resolved 'hasher-workflow.cwl' to 'file:///tmp/cluster_tests/hasher-workflow.cwl'
...
INFO Using cluster arva2 (https://arva2.arv.local:8443/)
INFO Upload local files: "test.txt"
INFO Uploaded to ea34d971b71d5536b4f6b7d6c69dc7f6+50 (arva2-4zz18-c8uvwqdry4r8jao)
INFO Using collection cache size 256 MiB
INFO [container hasher-workflow.cwl] submitted container_request arva2-xvhdp-v1bkywd58gyocwm
INFO [container hasher-workflow.cwl] arva2-xvhdp-v1bkywd58gyocwm is Final
INFO Overall process status is success
INFO Final output collection d6c69a88147dde9d52a418d50ef788df+123
{
    "hasher_out": {
        "basename": "hasher3.md5sum.txt",
        "class": "File",
        "location": "keep:d6c69a88147dde9d52a418d50ef788df+123/hasher3.md5sum.txt",
        "size": 95
    }
}
INFO Final process status is success
</code></pre>
</notextile>

h2(#post_install). After the installation

Once the installation is complete, it is recommended to keep a copy of your local configuration files. Committing them to version control is a good idea.

Re-running the Salt-based installer is not recommended for maintaining and upgrading Arvados, please see "Maintenance and upgrading":{{site.baseurl}}/admin/maintenance-and-upgrading.html for more information.