X-Git-Url: https://git.arvados.org/arvados-dev.git/blobdiff_plain/3de7432a187e32c3ca0dd3fb94b3d52c7563dc04..be33b03fe8aef6e9e23f82ee7653bc46fabef161:/jenkins/run-tests.sh

diff --git a/jenkins/run-tests.sh b/jenkins/run-tests.sh
index af2b3e2..03928ce 100755
--- a/jenkins/run-tests.sh
+++ b/jenkins/run-tests.sh
@@ -1,66 +1,106 @@
 #!/bin/bash
 
-# Install and test Arvados components.
-#
-# Exit non-zero if any tests fail.
-#
-# Arguments:
-# --skip FOO     Do not test the FOO component.
-# --only FOO     Do not test anything except the FOO component.
-# envvar=value   Set $envvar to value
-#
-# Regardless of which components are tested, install all components in
-# the usual sequence. (Many test suites depend on other components
-# being installed.)
-#
-# To run a specific Ruby test, set $workbench_test, $apiserver_test or
-# $cli_test on the command line:
-#
-# $ run-tests.sh --only workbench workbench_test=TEST=test/integration/pipeline_instances_test.rb
-#
-#
-# To run a specific Python test set $python_sdk_test or $fuse_test.
-#
-# $ run-tests.sh --only python_sdk python_sdk_test="--test-suite tests.test_keep_locator"
-#
-#
-# You can also pass "export ARVADOS_DEBUG=1" to enable additional debugging output:
-#
-# $ run-tests.sh "export ARVADOS_DEBUG=1"
-#
-#
-# Finally, you can skip the installation steps on subsequent runs this way:
-#
-## First run
-# $ run-tests.sh --leave-temp
-#
-## Subsequent runs: record the values of VENVDIR and GOPATH from the first run, and
-# provide them on the command line in subsequent runs:
-#
-# $ run-tests.sh --skip-install VENVDIR="/tmp/tmp.y3tsTmigio" GOPATH="/tmp/tmp.3r4sSA9F3l"
-
-
-# First make sure to remove any ARVADOS_ variables from the calling environment
-# that could interfer with the tests.
+read -rd "\000" helpmessage <<EOF
+$(basename $0): Install and test Arvados components.
+
+Exit non-zero if any tests fail.
+
+Syntax:
+        $(basename $0) WORKSPACE=/path/to/arvados [options]
+
+Options:
+
+--skip FOO     Do not test the FOO component.
+--only FOO     Do not test anything except the FOO component.
+--leave-temp   Do not remove GOPATH, virtualenv, and other temp dirs at exit.
+               Instead, show which directories were used this time so they
+               can be reused in subsequent invocations.
+--skip-install Do not run any install steps. Just run tests.
+               You should provide GOPATH, GEMHOME, and VENVDIR options
+               from a previous invocation if you use this option.
+WORKSPACE=path Arvados source tree to test.
+CONFIGSRC=path Dir with api server config files to copy into source tree.
+               (If none given, leave config files alone in source tree.)
+services/api_test="TEST=test/functional/arvados/v1/collections_controller_test.rb"
+               Restrict apiserver tests to the given file
+sdk/python_test="--test-suite test.test_keep_locator"
+               Restrict Python SDK tests to the given class
+apps/workbench_test="TEST=test/integration/pipeline_instances_test.rb"
+               Restrict Workbench tests to the given file
+ARVADOS_DEBUG=1
+               Print more debug messages
+envvar=value   Set \$envvar to value. Primarily useful for WORKSPACE,
+               *_test, and other examples shown above.
+
+Assuming --skip-install is not given, all components are installed
+into \$GOPATH, \$VENDIR, and \$GEMHOME before running any tests. Many
+test suites depend on other components being installed, and installing
+everything tends to be quicker than debugging dependencies.
+
+As a special concession to the current CI server config, CONFIGSRC
+defaults to $HOME/arvados-api-server if that directory exists.
+
+More information and background:
+
+https://arvados.org/projects/arvados/wiki/Running_tests
+
+Available tests:
+
+apps/workbench
+apps/workbench_benchmark
+apps/workbench_profile
+doc
+services/api
+services/crunchstat
+services/fuse
+services/keepproxy
+services/keepstore
+services/nodemanager
+sdk/cli
+sdk/python
+sdk/ruby
+sdk/go/arvadosclient
+sdk/go/keepclient
+sdk/go/streamer
+
+EOF
+
+# First make sure to remove any ARVADOS_ variables from the calling
+# environment that could interfere with the tests.
 unset $(env | cut -d= -f1 | grep \^ARVADOS_)
 
+# Reset other variables that could affect our [tests'] behavior by
+# accident.
+GITDIR=
+GOPATH=
+VENVDIR=
+PYTHONPATH=
+GEMHOME=
+
 COLUMNS=80
 
-export GOPATH=$(mktemp -d)
-VENVDIR=$(mktemp -d)
-cli_test=
-workbench_test=
-apiserver_test=
-python_sdk_test=
-ruby_sdk_test=
-fuse_test=
 leave_temp=
 skip_install=
 
-if [[ -f /etc/profile.d/rvm.sh ]]
-then
-    source /etc/profile.d/rvm.sh
-fi
+declare -A leave_temp
+clear_temp() {
+    leaving=""
+    for var in VENVDIR GOPATH GITDIR GEMHOME
+    do
+        if [[ -z "${leave_temp[$var]}" ]]
+        then
+            if [[ -n "${!var}" ]]
+            then
+                rm -rf "${!var}"
+            fi
+        else
+            leaving+=" $var=\"${!var}\""
+        fi
+    done
+    if [[ -n "$leaving" ]]; then
+        echo "Leaving behind temp dirs: $leaving"
+    fi
+}
 
 fatal() {
     clear_temp
@@ -68,51 +108,235 @@ fatal() {
     exit 1
 }
 
-# Sanity check
-echo "WORKSPACE=$WORKSPACE"
-[[ -n "$WORKSPACE" ]] || fatal "WORKSPACE not set"
+report_outcomes() {
+    for x in "${successes[@]}"
+    do
+        echo "Pass: $x"
+    done
 
-# Set up temporary install dirs
-mkdir -p "$GOPATH/src/git.curoverse.com"
-ln -sfn "$WORKSPACE" "$GOPATH/src/git.curoverse.com/arvados.git" \
-    || fatal "symlink failed"
+    if [[ ${#failures[@]} == 0 ]]
+    then
+        echo "All test suites passed."
+    else
+        echo "Failures (${#failures[@]}):"
+        for x in "${failures[@]}"
+        do
+            echo "Fail: $x"
+        done
+    fi
+}
 
-virtualenv --setuptools "$VENVDIR" || fatal "virtualenv $VENVDIR failed"
-PATH="$VENVDIR/bin:$PATH"
+sanity_checks() {
+  # Make sure WORKSPACE is set
+  if ! [[ -n "$WORKSPACE" ]]; then
+    echo >&2 "$helpmessage"
+    echo >&2
+    echo >&2 "Error: WORKSPACE environment variable not set"
+    echo >&2
+    exit 1
+  fi
+
+  # Make sure virtualenv is installed
+  `virtualenv --help >/dev/null 2>&1`
+
+  if [[ "$?" != "0" ]]; then
+    echo >&2
+    echo >&2 "Error: virtualenv could not be found"
+    echo >&2
+    exit 1
+  fi
+
+  # Make sure go is installed
+  `go env >/dev/null 2>&1`
+
+  if [[ "$?" != "0" ]]; then
+    echo >&2
+    echo >&2 "Error: go could not be found"
+    echo >&2
+    exit 1
+  fi
+
+  # Make sure gcc is installed
+  `gcc --help >/dev/null 2>&1`
+
+  if [[ "$?" != "0" ]]; then
+    echo >&2
+    echo >&2 "Error: gcc could not be found"
+    echo >&2
+    exit 1
+  fi
+
+}
+
+rotate_logfile() {
+  # $BUILD_NUMBER is set by Jenkins if this script is being called as part of a Jenkins run
+  if [[ -f "$1/$2" ]]; then
+    THEDATE=`date +%Y%m%d%H%M%S`
+    mv "$1/$2" "$1/$THEDATE-$BUILD_NUMBER-$2"
+    gzip "$1/$THEDATE-$BUILD_NUMBER-$2"
+  fi
+}
 
 declare -a failures
 declare -A skip
-
-# Always skip CLI tests. They don't know how to use run_test_server.py.
-skip[cli]=1
+declare -A testargs
+skip[apps/workbench_profile]=1
 
 while [[ -n "$1" ]]
 do
     arg="$1"; shift
     case "$arg" in
+        --help)
+            echo >&2 "$helpmessage"
+            echo >&2
+            exit 1
+            ;;
         --skip)
             skipwhat="$1"; shift
             skip[$skipwhat]=1
             ;;
         --only)
-            only="$1"; shift
+            only="$1"; skip[$1]=""; shift
             ;;
         --skip-install)
             skip_install=1
             ;;
         --leave-temp)
-            leave_temp=1
+            leave_temp[VENVDIR]=1
+            leave_temp[GOPATH]=1
+            leave_temp[GEMHOME]=1
+            ;;
+        *_test=*)
+            suite="${arg%%_test=*}"
+            args="${arg#*=}"
+            testargs["$suite"]="$args"
             ;;
         *=*)
-            eval $(echo $arg | cut -d= -f1)=\"$(echo $arg | cut -d= -f2-)\"
+            eval export $(echo $arg | cut -d= -f1)=\"$(echo $arg | cut -d= -f2-)\"
             ;;
         *)
-            echo >&2 "$0: Unrecognized option: '$arg'"
+            echo >&2 "$0: Unrecognized option: '$arg'. Try: $0 --help"
             exit 1
             ;;
     esac
 done
 
+sanity_checks
+
+echo "WORKSPACE=$WORKSPACE"
+
+if [[ -z "$CONFIGSRC" ]] && [[ -d "$HOME/arvados-api-server" ]]; then
+    # Jenkins expects us to use this by default.
+    CONFIGSRC="$HOME/arvados-api-server"
+fi
+
+# Clean up .pyc files that may exist in the workspace
+cd "$WORKSPACE"
+find -name '*.pyc' -delete
+
+# Set up temporary install dirs (unless existing dirs were supplied)
+for tmpdir in VENVDIR GOPATH GEMHOME
+do
+    if [[ -n "${!tmpdir}" ]]; then
+        leave_temp[$tmpdir]=1
+    else
+        eval $tmpdir=$(mktemp -d)
+    fi
+done
+
+setup_ruby_environment() {
+    if [[ -s "$HOME/.rvm/scripts/rvm" ]] ; then
+      source "$HOME/.rvm/scripts/rvm"
+      using_rvm=true
+    elif [[ -s "/usr/local/rvm/scripts/rvm" ]] ; then
+      source "/usr/local/rvm/scripts/rvm"
+      using_rvm=true
+    else
+      using_rvm=false
+    fi
+
+    if [[ "$using_rvm" == true ]]; then
+        # If rvm is in use, we can't just put separate "dependencies"
+        # and "gems-under-test" paths to GEM_PATH: passenger resets
+        # the environment to the "current gemset", which would lose
+        # our GEM_PATH and prevent our test suites from running ruby
+        # programs (for example, the Workbench test suite could not
+        # boot an API server or run arv). Instead, we have to make an
+        # rvm gemset and use it for everything.
+
+        [[ `type rvm | head -n1` == "rvm is a function" ]] \
+            || fatal 'rvm check'
+
+        # Put rvm's favorite path back in first place (overriding
+        # virtualenv, which just put itself there). Ignore rvm's
+        # complaint about not being in first place already.
+        rvm use @default 2>/dev/null
+
+        # Create (if needed) and switch to an @arvados-tests
+        # gemset. (Leave the choice of ruby to the caller.)
+        rvm use @arvados-tests --create \
+            || fatal 'rvm gemset setup'
+
+        rvm env
+    else
+        # When our "bundle install"s need to install new gems to
+        # satisfy dependencies, we want them to go where "gem install
+        # --user-install" would put them. (However, if the caller has
+        # already set GEM_HOME, we assume that's where dependencies
+        # should be installed, and we should leave it alone.)
+
+        if [ -z "$GEM_HOME" ]; then
+            user_gempath="$(gem env gempath)"
+            export GEM_HOME="${user_gempath%%:*}"
+        fi
+        PATH="$(gem env gemdir)/bin:$PATH"
+
+        # When we build and install our own gems, we install them in our
+        # $GEMHOME tmpdir, and we want them to be at the front of GEM_PATH and
+        # PATH so integration tests prefer them over other versions that
+        # happen to be installed in $user_gempath, system dirs, etc.
+
+        tmpdir_gem_home="$(env - PATH="$PATH" HOME="$GEMHOME" gem env gempath | cut -f1 -d:)"
+        PATH="$tmpdir_gem_home/bin:$PATH"
+        export GEM_PATH="$tmpdir_gem_home:$(gem env gempath)"
+
+        echo "Will install dependencies to $(gem env gemdir)"
+        echo "Will install arvados gems to $tmpdir_gem_home"
+        echo "Gem search path is GEM_PATH=$GEM_PATH"
+    fi
+}
+
+with_test_gemset() {
+    if [[ "$using_rvm" == true ]]; then
+        "$@"
+    else
+        GEM_HOME="$tmpdir_gem_home" "$@"
+    fi
+}
+
+export GOPATH
+mkdir -p "$GOPATH/src/git.curoverse.com"
+ln -sfn "$WORKSPACE" "$GOPATH/src/git.curoverse.com/arvados.git" \
+    || fatal "symlink failed"
+
+virtualenv --setuptools "$VENVDIR" || fatal "virtualenv $VENVDIR failed"
+. "$VENVDIR/bin/activate"
+
+# Note: this must be the last time we change PATH, otherwise rvm will
+# whine a lot.
+setup_ruby_environment
+
+echo "PATH is $PATH"
+
+if ! which bundler >/dev/null
+then
+    gem install --user-install bundler || fatal 'Could not install bundler'
+fi
+
+# Needed for run_test_server.py which is used by certain (non-Python) tests.
+echo "pip install -q PyYAML"
+pip install -q PyYAML || fatal "pip install PyYAML failed"
+
 checkexit() {
     if [[ "$?" != "0" ]]; then
         title "!!!!!! $1 FAILED !!!!!!"
@@ -137,7 +361,14 @@ do_test() {
         timer_reset
         if [[ "$2" == "go" ]]
         then
-            go test -timeout 20s "git.curoverse.com/arvados.git/$1"
+            go test ${testargs[$1]} "git.curoverse.com/arvados.git/$1"
+        elif [[ "$2" == "pip" ]]
+        then
+           cd "$WORKSPACE/$1" \
+                && python setup.py test ${testargs[$1]}
+        elif [[ "$2" != "" ]]
+        then
+            "test_$2"
         else
             "test_$1"
         fi
@@ -155,8 +386,15 @@ do_install() {
         timer_reset
         if [[ "$2" == "go" ]]
         then
-            pip install pyyaml
             go get -t "git.curoverse.com/arvados.git/$1"
+        elif [[ "$2" == "pip" ]]
+        then
+            cd "$WORKSPACE/$1" \
+                && python setup.py sdist rotate --keep=1 --match .tar.gz \
+                && pip install -q --upgrade dist/*.tar.gz
+        elif [[ "$2" != "" ]]
+        then
+            "install_$2"
         else
             "install_$1"
         fi
@@ -172,78 +410,73 @@ title () {
     printf "\n%*s%s\n\n" $((($COLUMNS-${#txt})/2)) "" "$txt"
 }
 
-clear_temp() {
-    if [[ -z "$leave_temp" ]]
-    then
-        for t in "$VENVDIR" "$GOPATH"
-        do
-            if [[ -n "$t" ]]
-            then
-                rm -rf "$t"
-            fi
-        done
-    else
-        echo "Leaving VENVDIR=\"$VENVDIR\""
-        echo "Leaving GOPATH=\"$GOPATH\""
-    fi
-}
-
-test_docs() {
-    cd "$WORKSPACE/doc"
-    bundle install --no-deployment
-    rm -rf .site
-    # Make sure python-epydoc is installed or the next line won't do much good!
-    ARVADOS_API_HOST=qr1hi.arvadosapi.com
-    PYTHONPATH=$WORKSPACE/sdk/python/ bundle exec rake generate baseurl=file://$WORKSPACE/doc/.site/ arvados_workbench_host=workbench.$ARVADOS_API_HOST arvados_api_host=$ARVADOS_API_HOST
-    unset ARVADOS_API_HOST
-}
-do_test docs
-
-test_doclinkchecker() {
-    cd "$WORKSPACE/doc"
-    bundle exec rake linkchecker baseurl=file://$WORKSPACE/doc/.site/
+bundle_install_trylocal() {
+    (
+        set -e
+        echo "(Running bundle install --local. 'could not find package' messages are OK.)"
+        if ! bundle install --local --no-deployment; then
+            echo "(Running bundle install again, without --local.)"
+            bundle install --no-deployment
+        fi
+        bundle package --all
+    )
 }
-do_test doclinkchecker
 
-test_ruby_sdk() {
-    cd "$WORKSPACE/sdk/ruby" \
-        && bundle install --no-deployment \
-        && bundle exec rake test
+install_doc() {
+    cd "$WORKSPACE/doc" \
+        && bundle_install_trylocal \
+        && rm -rf .site
 }
-do_test ruby_sdk
+do_install doc
 
 install_ruby_sdk() {
-    cd "$WORKSPACE/sdk/ruby" \
+    with_test_gemset gem uninstall --force --all --executables arvados \
+        && cd "$WORKSPACE/sdk/ruby" \
+        && bundle_install_trylocal \
         && gem build arvados.gemspec \
-        && gem install --no-ri --no-rdoc `ls -t arvados-*.gem|head -n1`
+        && with_test_gemset gem install --no-ri --no-rdoc `ls -t arvados-*.gem|head -n1`
 }
-do_install ruby_sdk
+do_install sdk/ruby ruby_sdk
 
 install_cli() {
-    cd "$WORKSPACE/sdk/cli" \
+    with_test_gemset gem uninstall --force --all --executables arvados-cli \
+        && cd "$WORKSPACE/sdk/cli" \
+        && bundle_install_trylocal \
         && gem build arvados-cli.gemspec \
-        && gem install --no-ri --no-rdoc `ls -t arvados-cli-*.gem|head -n1`
-}
-do_install cli
-
-test_cli() {
-    title "Starting SDK CLI tests"
-    cd "$WORKSPACE/sdk/cli" \
-        && bundle install --no-deployment \
-        && mkdir -p /tmp/keep \
-        && KEEP_LOCAL_STORE=/tmp/keep bundle exec rake test $cli_test
+        && with_test_gemset gem install --no-ri --no-rdoc `ls -t arvados-cli-*.gem|head -n1`
 }
-do_test cli
+do_install sdk/cli cli
+
+# Install the Python SDK early. Various other test suites (like
+# keepproxy) bring up run_test_server.py, which imports the arvados
+# module. We can't actually *test* the Python SDK yet though, because
+# its own test suite brings up some of those other programs (like
+# keepproxy).
+declare -a pythonstuff
+pythonstuff=(
+    sdk/python
+    services/fuse
+    services/nodemanager
+    )
+for p in "${pythonstuff[@]}"
+do
+    do_install "$p" pip
+done
 
 install_apiserver() {
-    cd "$WORKSPACE/services/api"
-    bundle install --no-deployment
+    cd "$WORKSPACE/services/api" \
+        && RAILS_ENV=test bundle_install_trylocal
 
     rm -f config/environments/test.rb
     cp config/environments/test.rb.example config/environments/test.rb
 
-    cp $HOME/arvados-api-server/database.yml config/ || fatal "database.yml"
-    cp $HOME/arvados-api-server/application.yml config/ || fatal "application.yml"
+    if [ -n "$CONFIGSRC" ]
+    then
+        for f in database.yml application.yml
+        do
+            cp "$CONFIGSRC/$f" config/ || fatal "$f"
+        done
+    fi
 
     # Fill in a random secret_token and blob_signing_key for testing
     SECRET_TOKEN=`echo 'puts rand(2**512).to_s(36)' |ruby`
@@ -252,10 +485,8 @@ install_apiserver() {
     sed -i'' -e "s:SECRET_TOKEN:$SECRET_TOKEN:" config/application.yml
     sed -i'' -e "s:BLOB_SIGNING_KEY:$BLOB_SIGNING_KEY:" config/application.yml
 
-    export RAILS_ENV=test
-
     # Set up empty git repo (for git tests)
-    GITDIR="$WORKSPACE/tmpgit"
+    GITDIR=$(mktemp -d)
     sed -i'' -e "s:/var/cache/git:$GITDIR:" config/application.default.yml
 
     rm -rf $GITDIR
@@ -273,20 +504,15 @@ install_apiserver() {
     psql arvados_test -c "SELECT pg_terminate_backend (pg_stat_activity.procpid::int) FROM pg_stat_activity WHERE pg_stat_activity.datname = 'arvados_test';" 2>/dev/null
 
     cd "$WORKSPACE/services/api" \
-        && bundle exec rake db:drop \
-        && bundle exec rake db:create \
-        && bundle exec rake db:setup
+        && RAILS_ENV=test bundle exec rake db:drop \
+        && RAILS_ENV=test bundle exec rake db:setup \
+        && RAILS_ENV=test bundle exec rake db:fixtures:load
 }
-do_install apiserver
-
-test_apiserver() {
-    cd "$WORKSPACE/services/api"
-    bundle exec rake test $apiserver_test
-}
-do_test apiserver
+do_install services/api apiserver
 
 declare -a gostuff
 gostuff=(
+    services/crunchstat
     services/keepstore
     services/keepproxy
     sdk/go/arvadosclient
@@ -298,50 +524,67 @@ do
     do_install "$g" go
 done
 
-install_python_sdk() {
-    # Install the Python SDK early. Various other test suites (like
-    # keepproxy) bring up run_test_server.py, which imports the arvados
-    # module. We can't actually *test* the Python SDK yet though, because
-    # its own test suite brings up some of those other programs (like
-    # keepproxy).
+install_workbench() {
+    cd "$WORKSPACE/apps/workbench" \
+        && mkdir -p tmp/cache \
+        && RAILS_ENV=test bundle_install_trylocal
+}
+do_install apps/workbench workbench
+
+start_api() {
+    echo 'Starting API server...'
+    cd "$WORKSPACE" \
+        && eval $(python sdk/python/tests/run_test_server.py start --auth admin) \
+        && export ARVADOS_TEST_API_HOST="$ARVADOS_API_HOST" \
+        && export ARVADOS_TEST_API_INSTALLED="$$" \
+        && (env | egrep ^ARVADOS)
+}
 
-    cd "$WORKSPACE/sdk/python" \
-        && python setup.py egg_info -b ".$(git log --format=format:%ct.%h -n1 .)" sdist rotate --keep=1 --match .tar.gz \
-        && pip install dist/arvados-python-client-0.1.*.tar.gz
+stop_api() {
+    unset ARVADOS_TEST_API_HOST
+    cd "$WORKSPACE" \
+        && python sdk/python/tests/run_test_server.py stop
 }
-do_install python_sdk
 
-install_fuse() {
-    cd "$WORKSPACE/services/fuse" \
-        && python setup.py egg_info -b ".$(git log --format=format:%ct.%h -n1 .)" sdist rotate --keep=1 --match .tar.gz \
-        && pip install dist/arvados_fuse-0.1.*.tar.gz
+test_doclinkchecker() {
+    (
+        set -e
+        cd "$WORKSPACE/doc"
+        ARVADOS_API_HOST=qr1hi.arvadosapi.com
+        # Make sure python-epydoc is installed or the next line won't
+        # do much good!
+        PYTHONPATH=$WORKSPACE/sdk/python/ bundle exec rake linkchecker baseurl=file://$WORKSPACE/doc/.site/ arvados_workbench_host=workbench.$ARVADOS_API_HOST arvados_api_host=$ARVADOS_API_HOST
+    )
 }
-do_install fuse
-
-test_python_sdk() {
-    # Python SDK. We test this before testing keepproxy: keepproxy runs
-    # run_test_server.py, which depends on the yaml package, which is in
-    # tests_require but not install_requires, and therefore does not get
-    # installed by setuptools until we run "setup.py test" *and* install
-    # the .egg files that setup.py downloads.
-
-    cd "$WORKSPACE/sdk/python" \
-        && python setup.py test $python_sdk_test
-    r=$?
-    easy_install *.egg
-    return $r
+do_test doc doclinkchecker
+
+stop_api
+
+test_apiserver() {
+    cd "$WORKSPACE/services/api" \
+        && RAILS_ENV=test bundle exec rake test TESTOPTS=-v ${testargs[services/api]}
 }
-do_test python_sdk
-
-test_fuse() {
-    # Install test dependencies here too, in case run_test_server needs them.
-    cd "$WORKSPACE/services/fuse" \
-        && python setup.py test $fuse_test
-    r=$?
-    easy_install *.egg
-    return $r
+do_test services/api apiserver
+
+start_api
+
+test_ruby_sdk() {
+    cd "$WORKSPACE/sdk/ruby" \
+        && bundle exec rake test TESTOPTS=-v ${testargs[sdk/ruby]}
 }
-do_test fuse
+do_test sdk/ruby ruby_sdk
+
+test_cli() {
+    cd "$WORKSPACE/sdk/cli" \
+        && mkdir -p /tmp/keep \
+        && KEEP_LOCAL_STORE=/tmp/keep bundle exec rake test TESTOPTS=-v ${testargs[sdk/cli]}
+}
+do_test sdk/cli cli
+
+for p in "${pythonstuff[@]}"
+do
+    do_test "$p" pip
+done
 
 for g in "${gostuff[@]}"
 do
@@ -350,26 +593,28 @@ done
 
 test_workbench() {
     cd "$WORKSPACE/apps/workbench" \
-        && bundle install --no-deployment \
-        && bundle exec rake test $workbench_test
+        && RAILS_ENV=test bundle exec rake test TESTOPTS=-v ${testargs[apps/workbench]}
 }
-do_test workbench
+do_test apps/workbench workbench
 
-clear_temp
+test_workbench_benchmark() {
+    cd "$WORKSPACE/apps/workbench" \
+        && RAILS_ENV=test bundle exec rake test:benchmark ${testargs[apps/workbench_benchmark]}
+}
+do_test apps/workbench_benchmark workbench_benchmark
 
-for x in "${successes[@]}"
-do
-    echo "Pass: $x"
-done
+test_workbench_profile() {
+    cd "$WORKSPACE/apps/workbench" \
+        && RAILS_ENV=test bundle exec rake test:profile ${testargs[apps/workbench_profile]}
+}
+do_test apps/workbench_profile workbench_profile
+
+rotate_logfile "$WORKSPACE/apps/workbench/log/" "test.log"
+
+stop_api
+rotate_logfile "$WORKSPACE/services/api/log/" "test.log"
+
+report_outcomes
+clear_temp
 
-if [[ ${#failures[@]} == 0 ]]
-then
-    echo "All test suites passed."
-else
-    echo "Failures (${#failures[@]}):"
-    for x in "${failures[@]}"
-    do
-        echo "Fail: $x"
-    done
-fi
 exit ${#failures}